BMW M3 Forum (E90 E92)

BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Go Back   M3Post - BMW M3 Forum > E90/E92 M3 Technical Topics > Engine, Transmission, Exhaust, Drivetrain, ECU Software Modifications
 
GTB Performance
Post Reply
 
Thread Tools Search this Thread
      07-11-2010, 12:05 AM   #1
E90///M3`
Major General
Philippines
62

 
Drives: 2008 E90M3
Join Date: Jan 2009
Location: Daly City -4- Work///Camarillo is Home


Posts: 5,278
iTrader: (3)

Garage List
2008 BMW E90 M3  [3.80]
Cool My Review of the ESS VT1 Supercharger Kit

Dyno Charts and more pictures to follow in the coming weeks...


I've trusted ESS since the day i tried the beta version of the NA Tune. Even though my version of the NA Tune only had an extra 5-6hp in the midrange, I still enjoyed how much more smooth the car ran. After the pre-MFEST meet @ Oakley Headquarters earlier this year, I got the chance to talk with Roman & AJ about updating my software to the current version they had been distributing. About 30min later AJ accommodated me and re-tuned the car right there! After talking with them at great length about the supercharger kit, i decided to save some money and purchase their kit.


I recently picked up my E90M3 after having the ESS VT1-535 Supercharger kit installed and let me tell you... After having the car for only three days, I've already put over 250 more miles on the car... I'm more happy with my car than EVER!!!


I really don't know how much power i'm putting down quite yet, PLUS i'm still running the stock muffler & x-pipe. I wouldn't be surprised if the stock muffler & x-pipe are restricting the full power of the kit but we'll see once Arqray exhaust finally arrives. I will be doing a before & after dyno run the same day of the exhaust install.


On my way home from picking up the car i decided to reset my gas mileage to see how much of a change there really was. To my surprise, the gas mileage didn't change too much on the freeway. At a cruising speed of 75mph over a distance of over 40 miles, the gauge read 21.2mpg!! During stop-n-go driving during traffic the next day my gas mileage did go down from an original average of 18.4mpg to about 17mpg, which was to be expected.


As for power delivery... to be honest, i haven't had a good chance to really PUSH the car but getting to 100mph is absolutely NO PROBLEM! First gear is almost not even needed cause i'm into 2nd gear in practically no time at all! When going through the gears it's not like an abrupt delivery to the wheels, it feels more smooth as if i didn't even have the supercharger installed! I can't say enough about the car.

One thing i do wanna say about the VT1-535 is that if you're still THINKING about getting the kit or VT2 or even higher... just DO ET!!!!



Here are a few pictures i have during & after the install:



Once everything was test-fitted, we sent the plenum & supercharger off to be painted. Here is the final look of the car as she sits today:







Major props and thanks to the homie Mark for a staying up late doing the install...
Laidback aka Chris, thanks for making this project a success by coordinating everything!
Roman, thanks for shipping everything out so quickly and always being there for any questions I've had before, during & after the install.








REMEMBER, these runs were done on 91 Octane with a stock x-pipe and Arqray Muffler (VT1-535 with 5psi pulley)

__________________
- Jason P
:Have: 08 E90M3, Varis VRS Front Lip, LS3, ESS Supercharger, Arqray Exhaust, Neez Wheels
:Want: VRS Carbon GT Wing & Cooling Bonnet, LCI Taillights
:Videos: EnvyRidesTV, GPR 1, GPR 2, GPR 3, ///MFEST

Last edited by E90///M3`; 08-16-2010 at 04:51 PM. Reason: ADDED DYNO CHARTS
Appreciate 0
      07-11-2010, 02:05 AM   #2
ooowowizstev
Brigadier General
56

 
Drives: '08 E92 M3
Join Date: Jul 2008
Location: Los Angeles, Irvine


Posts: 4,268
iTrader: (4)

Garage List
2008 BMW E92 M3  [5.00]
Sooo nice
__________________
'08 E92 ///M3 - AW/BLK/CF, M-DCT, 19's
H&R, Vorsteiner, Eisenmann, BMC, BBS More to come...
Appreciate 0
      07-11-2010, 09:27 AM   #3
SIIK2NR
Captain
South Korea
16

 
SIIK2NR's Avatar
 
Drives: AW E92 M3
Join Date: Mar 2007
Location: San Dog


Posts: 604
iTrader: (0)

cost out of pocket and why did you go with vt1?
__________________
Current: 2006 Lotus Elise SC
Previous:
2008 AW E92 M3 6MT - Sold
2004 AP2 S2000 - Sold
Appreciate 0
      07-11-2010, 10:34 AM   #4
M3Alpine
Major
20

 
M3Alpine's Avatar
 
Drives: e92 M3 AW/FR
Join Date: Feb 2006
Location: Central NJ


Posts: 1,471
iTrader: (11)

awesome man.... paint looks great... enjoy your new power
__________________
2002 AW/IR : Sold
2004 AW/BLK : Sold
2009 AW/FR : Sold
Appreciate 0
      07-11-2010, 11:01 AM   #5
forumes
New Member
United Arab Emirates
3

 
Drives: E92 M3 DCT 2009 ESS VT-1 535
Join Date: Feb 2009
Location: Dubai


Posts: 27
iTrader: (0)

cograts

EnjooooooooooooooY

but how you removed the ess tuning writing from the top of the mainfold
Appreciate 0
      07-11-2010, 11:15 AM   #6
Dengel
Non-Guido Jersey Resident
United_States
19

 
Dengel's Avatar
 
Drives: Slow Jeep Rubicon
Join Date: May 2009
Location: Scottsdale, AZ


Posts: 678
iTrader: (3)

http://badcopnodonuts.com/2010/07/08...stormtroopers/

is that you on the left here?
Appreciate 0
      07-11-2010, 11:44 AM   #7
DLSJ5
Brigadier General
United_States
83

 
DLSJ5's Avatar
 
Drives: 08 E92 DCT M3
Join Date: Dec 2006
Location: CA


Posts: 3,475
iTrader: (1)

Send a message via AIM to DLSJ5
The kit looks great, congrats Jason!
__________________
08 E92 M3 DCT - Bolt Ons - 60-130MPH 10.71s - 11.88 @ 118MPH - 377WHP
ESS VT2-625 SC 60-130MPH 6.80s - 11.30 @ 129.3 MPH 586WHP / 379WTQ @ 7.2psi - 94 octane / Water meth
ESS VT3-750 - 60-130MPH 6.44s - 10.81 @ 135.13 MPH 690Whp/463Wtq@13.5 psi
Appreciate 0
      07-11-2010, 11:50 AM   #8
Green///Hell
Colonel
United_States
36

 
Green///Hell's Avatar
 
Drives: E92 M3 6MT AW
Join Date: Feb 2009
Location: Sydney/Chicago


Posts: 2,661
iTrader: (5)

Quote:
Originally Posted by forumes View Post
cograts

EnjooooooooooooooY

but how you removed the ess tuning writing from the top of the mainfold
buff and sand them down and smoothen out the plenum

Did you go with the full VT1 or VT1 with the cooling installed?
__________________
Appreciate 0
      07-11-2010, 12:17 PM   #9
E90///M3`
Major General
Philippines
62

 
Drives: 2008 E90M3
Join Date: Jan 2009
Location: Daly City -4- Work///Camarillo is Home


Posts: 5,278
iTrader: (3)

Garage List
2008 BMW E90 M3  [3.80]
Quote:
Originally Posted by SIIK2NR View Post
cost out of pocket and why did you go with vt1?
including install and everything? a little under 10k


Quote:
Originally Posted by M3Alpine View Post
awesome man.... paint looks great... enjoy your new power
you better believe i will!


Quote:
Originally Posted by forumes View Post
but how you removed the ess tuning writing from the top of the mainfold
exactly what Green///Hell said... i actually have another set of badges that i'm having painted and will place it where it's supposed to be


Quote:
Originally Posted by Dengel View Post
ya, John was over at the shop while we were finishing up the installs on both kits and he snapped a few pictures


Quote:
Originally Posted by DLSJ5 View Post
The kit looks great, congrats Jason!
Thanks Drew... i appreciate the kind words


Quote:
Originally Posted by Green///Hell View Post
Did you go with the full VT1 or VT1 with the cooling installed?
the water to Air intercooler? i wish i could have but i'll just upgrade later when i can save up a little more
__________________
- Jason P
:Have: 08 E90M3, Varis VRS Front Lip, LS3, ESS Supercharger, Arqray Exhaust, Neez Wheels
:Want: VRS Carbon GT Wing & Cooling Bonnet, LCI Taillights
:Videos: EnvyRidesTV, GPR 1, GPR 2, GPR 3, ///MFEST
Appreciate 0
      07-11-2010, 12:31 PM   #10
AJ@ESS
BimmerPost Supporting Vendor
1


 
Drives: E60 M5
Join Date: Jun 2010
Location: USA


Posts: 199
iTrader: (0)

Quote:
Originally Posted by Green///Hell View Post
buff and sand them down and smoothen out the plenum

Did you go with the full VT1 or VT1 with the cooling installed?
There is no VT1 with cooling, all VT1's are non-IC. The closest intercooled kit to the VT1-535 is the VT2-550.
Appreciate 0
      07-11-2010, 02:39 PM   #11
Bob MG
Moderating
Greenland
67

 
Bob MG's Avatar
 
Drives: like a muppet
Join Date: Oct 2009
Location: Vienna


Posts: 1,823
iTrader: (0)

Congrats Jason.. You will see how addictive power is, you will be selling your mom soon to get that VT2 upgrade
Appreciate 0
      07-11-2010, 03:20 PM   #12
LvnLrg213
Private First Class
7

 
Drives: 2013 F10 M5; 2013 X5M
Join Date: Oct 2007
Location: Coral Gables, Florida


Posts: 125
iTrader: (0)

Congrats!
Appreciate 0
      07-11-2010, 03:24 PM   #13
rAdzM
Smashed!
United_States
21

 
Drives: 2009 E92 M3
Join Date: Oct 2008
Location: Socal


Posts: 1,181
iTrader: (9)

Garage List
2009 BMW M3  [5.00]
2006 BMW M5  [4.50]
Quote:
Originally Posted by Bob MG View Post
Congrats Jason.. You will see how addictive power is, you will be selling your mom soon to get that VT2 upgrade
lol

congrats Jason!
__________________
est. 2008

BBS / Brembo / KW / Recaro / VARIS / Vorsteiner / BMW Performance / Oneighty / Dinan
Appreciate 0
      07-11-2010, 05:15 PM   #14
KiokenM3
Lieutenant Colonel
25

 
KiokenM3's Avatar
 
Drives: LIFTED JEEP JK!
Join Date: Dec 2008
Location: LA


Posts: 1,507
iTrader: (4)

congrats and welcome to the club
__________________
Gintani SC ST2+, OE tuned, RPI GT EXHAUST=601WHP, 396TORQUE on 91pump. DYNOJET STD CF. SOLD
Appreciate 0
      07-11-2010, 05:27 PM   #15
ersin
Brigadier General
United_States
42

 
ersin's Avatar
 
Drives: 08 IB E92 M3
Join Date: Mar 2008
Location: Maryland


Posts: 4,068
iTrader: (1)

Quote:
Originally Posted by Dengel View Post
Blown stormtroopers!




Cheers.
__________________

I've been assimilated. 6MT/ZPP/18"/PS extended.
Appreciate 0
      07-12-2010, 10:51 AM   #16
GBX
Lieutenant
United_States
11

 
GBX's Avatar
 
Drives: 08 e92 335xi MB/SB
Join Date: Aug 2007
Location: NYC


Posts: 444
iTrader: (0)

Garage List
2008 e92 335xi  [0.00]
Send a message via AIM to GBX
what's everyones feeling on the fact that this blower needs its oil changed about every 7-8k miles? As a daily driver, it just seems like a pain in the ass to me. Granted it only takes 15 minutes (from what i've read), but i'd much rather the blower share its oil with the motor and change that. If it was a weekend car, i wouldn't car so much but as a daily driver, idk. Thoughts?
Appreciate 0
      07-12-2010, 11:00 AM   #17
LateBraking
Brigadier General
United_States
64

 
LateBraking's Avatar
 
Drives: Reliable Cars
Join Date: Sep 2008
Location: Pacific Standard Time


Posts: 3,878
iTrader: (27)

Quote:
Originally Posted by GBX View Post
what's everyones feeling on the fact that this blower needs its oil changed about every 7-8k miles? As a daily driver, it just seems like a pain in the ass to me. Granted it only takes 15 minutes (from what i've read), but i'd much rather the blower share its oil with the motor and change that. If it was a weekend car, i wouldn't car so much but as a daily driver, idk. Thoughts?
It just sounds to me that you change the oil on the blower at the same time that you're changing your engine oil anyways, at every 5-7.5k miles.
Appreciate 0
      07-12-2010, 11:03 AM   #18
Roman@ESS
BimmerPost Supporting Vendor
104


 
Roman@ESS's Avatar
 
Drives: ESS Supercharged E92 M3
Join Date: May 2007
Location: AZ


Posts: 2,653
iTrader: (5)

Quote:
Originally Posted by GBX View Post
what's everyones feeling on the fact that this blower needs its oil changed about every 7-8k miles? As a daily driver, it just seems like a pain in the ass to me. Granted it only takes 15 minutes (from what i've read), but i'd much rather the blower share its oil with the motor and change that. If it was a weekend car, i wouldn't car so much but as a daily driver, idk. Thoughts?
There are several reasons behind the design. First it simplifies the installation process. You do not need to run additional oil lines and tap into the cars motor oil. Also by not sharing the oil with the motor it helps to keep oil temps down during operation. It's a simple process to change the oil in the blower; it only takes about 5 min. Most have it done when the car gets its motor oil changed.
Appreciate 0
      07-12-2010, 11:22 AM   #19
GBX
Lieutenant
United_States
11

 
GBX's Avatar
 
Drives: 08 e92 335xi MB/SB
Join Date: Aug 2007
Location: NYC


Posts: 444
iTrader: (0)

Garage List
2008 e92 335xi  [0.00]
Send a message via AIM to GBX
Quote:
Originally Posted by Rom3n View Post
There are several reasons behind the design. First it simplifies the installation process. You do not need to run additional oil lines and tap into the cars motor oil. Also by not sharing the oil with the motor it helps to keep oil temps down during operation. It's a simple process to change the oil in the blower; it only takes about 5 min. Most have it done when the car gets its motor oil changed.
ok, ya sold me. I just always look for the less maintainence option on a mod like this. The ASA blower i had on my 330ci used the engines oil..it was just one less thing to worry about but this sounds easy enough!!
Appreciate 0
      07-12-2010, 02:39 PM   #20
mikewads
Lieutenant
22

 
mikewads's Avatar
 
Drives: 2009 M3 Coupe DCT
Join Date: Jan 2009
Location: Georgia


Posts: 470
iTrader: (3)

Quote:
Originally Posted by Rom3n View Post
There are several reasons behind the design. First it simplifies the installation process. You do not need to run additional oil lines and tap into the cars motor oil. Also by not sharing the oil with the motor it helps to keep oil temps down during operation. It's a simple process to change the oil in the blower; it only takes about 5 min. Most have it done when the car gets its motor oil changed.
Also, lets say something fails inside the supercharger (like a bad bearing or a gear). Would you want those fine pieces of metal going into your M3s engine oil?
__________________
2012 Blue Pearl GT-R
1068whp & 906wtq on E85 / 60 - 130 MPH in 3.8 secs

2009 BMW M3 ESS Supercharged / Nitrous - 10.87 @ 131 MPH / 60 - 130 MPH in 6.23 secs
Appreciate 0
      07-12-2010, 07:20 PM   #21
Ryan@IND
BimmerPost Supporting Vendor
United_States
243


 
Ryan@IND's Avatar
 
Drives: M3
Join Date: Mar 2008
Location: Chicago


Posts: 4,263
iTrader: (16)

Send a message via AIM to Ryan@IND Send a message via Skype™ to Ryan@IND
Congrats and enjoy the car!
Appreciate 0
      07-12-2010, 09:16 PM   #22
biglare
******
United_States
98

 
Drives: ?
Join Date: May 2008
Location: ?


Posts: 3,136
iTrader: (3)

Congrats Jason!

The color on the manifold came out nice!

Can't wait to hear your impressions after a few days/weeks and see more pics.
Appreciate 0
Post Reply

Bookmarks

Tags
ess, supercharger, vt1

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 09:57 AM.




m3post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST