|10-14-2009, 01:30 AM||#1|
BimmerPost Supporting Vendor
PYSpeed.com | **Active Autowerke** E9X M3 Signature Pulley System
PYSpeed is happy to announce a new addition to our growing list products.
The Active Autowerke E9X M3 signature pulley system.
Purchase directly from our website here. PM us if there is any question.
Come Play with POWER !!!
Next in the Signature Line of upgrades for you E9X M3 (DCT & Manual Transmission) is the Active Autowerke Signature Pulley Kit. This is a complete bolt on kit engineered using Aircraft Grade Billet 6061 Hard Coat Anodized Aluminum. After months of R&D in house and overseas (various climates & conditions) we concluded that there may be a slight power increase by going smaller than our pulley but the trade off is a chance of making the engine run hotter or possibly overheat (we noticed this in both DCT cars and Manual cars on and off the track), we choose reliability over that extra 1-2 rwhp that we may get from a smaller pulley. Testing in Miami, FL and in other hot climates was a must in our R&D process to take things to the “extreme limits”.
Another key element in the development of the Signature Pulley Kit was to retain the “Factory Crank hex Drive Adapter”, this was important to keep this factory feature for its inherent purpose. The pulley kit does not modify factory harmonics or dampening. Stronger side walls were the last key element in choosing our size over a smaller design.
On all newer model E9X M3s. as of production date June, 2008 and newer, BMW changed to a DPK style belt which has multiple grooves on both sides of the belt. This now made the original single sided PK belt obsolete when used on the newer model E9x M3s. The engineers at Active Autowerke saw this concern and had a new, precise DPK belt manufactured just for the newer E9x M3s. So, if you own a pre June-2008 or newer, you need not worry about PK or DPK and underdrive pulleys when you have the assurance of the Active Autowerke Engineers having your back covered.
The Active Autowerke E9X Signature Pulley Kit yields gains of 12+HP on a completely stock car. This is a complete bolt on system that is easily reversible.
A must for the true enthusiast.
HP gains: 10 RWHP ~ 12+ HP
Complete Bolt on System and is easily reversible
Aircraft Grade Billet 6061 Hard Coat Anodized Aluminum
Retains Factory Crank Hex Drive Adapter
Includes Replacement DRIVE and A/C Belts
Does Not Modify Factory Harmonics or Dampening
Compatiable for DCT and Manual models
Reduces Rotational Mass
Does not cause overheating found in smaller pulley designs
Pair with AA Software for Additional Gains
Applicable for PK or DPK belt configurations
Horsepower: 12 HP: Dyno REAR wheel power gains
Torque: 7 Ft Lbs of Torque: Dyno REAR wheel torque gains
|Thread Tools||Search this Thread|