Official Texas M3 Chat Thread - Page 104

thatarchitect · 01-06-2010, 08:32 PM

Quote:

Originally Posted by Nawaaz

I spoke to Mike recently, and he told me that he would ship over a cable to me so that he could help me reset the torque limiter. It may be a few weeks until the cable makes it to me, since his other customers are in line to use it for the same issue as me. Mike will definitely help me get the problem solved, so I'm not worried as much now. Whew!

Thank you, Edwin.

Glad to hear you have it under control. My car makes a weird high pitch noise at very low speeds. Im hoping that Choung can help me out at Classic soon. Peace of mind is hard to put a price on.

Mike Benvo · 01-06-2010, 09:05 PM

Worry not my friend, I'll make sure it's taken care of.

PS: Anyone here good at making signatures? Time for me to get a new one.

Quote:

Originally Posted by Nawaaz

I spoke to Mike recently, and he told me that he would ship over a cable to me so that he could help me reset the torque limiter. It may be a few weeks until the cable makes it to me, since his other customers are in line to use it for the same issue as me. Mike will definitely help me get the problem solved, so I'm not worried as much now. Whew!

Thank you, Edwin.

Blake · 01-06-2010, 09:50 PM

Quote:

Originally Posted by Mike@Powerchip

PS: Anyone here good at making signatures? Time for me to get a new one.

here you go...

Nawaaz · 01-06-2010, 10:03 PM

^

Quote:

Originally Posted by Mike@Powerchip

Worry not my friend, I'll make sure it's taken care of.

PS: Anyone here good at making signatures? Time for me to get a new one.

Thank you, Mike.

tinpot · 01-06-2010, 10:34 PM

Nawaaz – good talking with you tonight. I’m now subscribed to this thread in case any other issues come up

thatarchitect · 01-06-2010, 10:38 PM

Quote:

Originally Posted by Mike@Powerchip

Worry not my friend, I'll make sure it's taken care of.

PS: Anyone here good at making signatures? Time for me to get a new one.

Im pretty good in photoshop. If you want Ill make it for you. Check out my website if you want to see something Ive designed. Its easier than sending a portfolio...

www.linearedge.com

Nawaaz · 01-06-2010, 10:51 PM

Quote:

Originally Posted by tinpot

Nawaaz – good talking with you tonight. I’m now subscribed to this thread in case any other issues come up

Likewise, my friend.

Hope to have our situation solved soon.

thatarchitect · 01-06-2010, 11:47 PM

Can you guys see my sig? I just made one and it shows up under my profile but I dont see it in the forum...

thatarchitect · 01-06-2010, 11:47 PM

Im a moron... Apparently it will only show up in messages you post after it has been made...

spicoli024 · 01-07-2010, 12:00 PM

Quote:

Originally Posted by thatarchitect

I don't know whether you guys like racing or not but I just started this company... www.linearedge.com

I figured it would be a good alternative for motorsport enthusiasts who want to upgrade from posters.

Let me know what you guys think!

Really cool idea! I love the concept of incorporating your favorite track into a work of art, something to hang on your wall. Couple question though.

1. Do these carvings show track elevation? It would be a cool treat to the eye to watch the angles change shape as you walk by, kind of like in architecture.

2. Colors?? I know you mentioned you could customize them but which do you offer and when can you get them? I'm into the idea of yellow, red & blue. Calder-esque, if you will.

Quote:

Originally Posted by Nawaaz

Thank you Tom!

I'm calling Mike right away!

I'll see if he can save my day...

Mike at BMS in Houston? If so, be sure to do a flyby down Kirby so I can hear that exhaust...

Nawaaz · 01-07-2010, 12:01 PM

^ No, no......This is Mike Benvo from Powerchip, located in California.

Yet I'll be sure to stop by, if I come down your way in the future.

Quote:

Originally Posted by thatarchitect

Im a moron... Apparently it will only show up in messages you post after it has been made...

In that case, I'm a moron too!

I was wondering the same thing.

Blake · 01-07-2010, 02:11 PM

coming home tomorrow to watch the cowboys game with my buddies!

JC919 · 01-07-2010, 02:19 PM

Quote:

Originally Posted by thatarchitect

Can you guys see my sig? I just made one and it shows up under my profile but I dont see it in the forum...

Wow, that's really cool!! Any plans on doing the Nurburgring Nordschleife?

thatarchitect · 01-07-2010, 03:06 PM

Hey Spicoli,

1. Right now I do not have the tracks offered with elevations. That would raise the price considerably for one and also it would be very hard to gather all that data for each track. However I can have that done as a special order if I can get my hands on the elevations for the track. I mainly was just trying to keep the price down on the basic models the best I could.

2. As far as other colors go, that is on a per order basis. The black is the standard and any other colors can be requested. The color you see will be formica so any color formica comes in can be done. It sounds like you are trying to possibly do multiple colors on the same track. Are these supposed to be side by side like the M3 badge all the way around the track? That would be extremely difficult but I can look into it.

I know there are a million little different things that could be done with these but I finally had to stop pulling my hair out over it and just offer the product a certain way to get it out there. I think the feedback from you guys and others will help me gauge what most people are looking for.

thatarchitect · 01-07-2010, 03:08 PM

Quote:

Originally Posted by JC919

Wow, that's really cool!! Any plans on doing the Nurburgring Nordschleife?

Yep. Ive already had an order come in for it. I know its a popular track but the only reason its not on the site yet is because it is not in any of those categories. I know, lame answer, but its all I got!

If you are interested in getting the Nordschleife I can always let you know once it is available. Should be within the next few days hopefully!

Blake · 01-07-2010, 03:24 PM

brought the children out for playtime today

JC919 · 01-07-2010, 03:28 PM

^We have a lot more in common than I originally suspected

architect, let me know when you have more info/pricing on the ring

Blake · 01-07-2010, 03:32 PM

Quote:

Originally Posted by JC919

^We have a lot more in common than I originally suspected

added the goodies (minus the eotech) today. lasermax rail mount red laser, rail mount light, and the bipod. laser is more or less just another gadget, as it's a good inch off center.

JC919 · 01-07-2010, 04:14 PM

^When I get the new goodies on the AR and G3 I'll post up some pics. I really need to get an Eotech to transfer between the two

Nawaaz · 01-07-2010, 05:59 PM

Yikes! Those guns struck me with fear and made me wet myself..

Blake · 01-07-2010, 06:03 PM

Quote:

Originally Posted by Nawaaz

Yikes! Those guns struck me with fear and made me wet myself..

guns aren't dangerous...their operators are! that being said, i'm licensed to carry a gun and i can fit rounds in a very tight grouping from any stance, at many distances. plus, they're fun toys when you're bored at the range!

DevJ · 01-07-2010, 06:08 PM

Quote:

Originally Posted by Blake

guns aren't dangerous...their operators are! that being said, i'm licensed to carry a gun and i can fit rounds in a very tight grouping from any stance, at many distances. plus, they're fun toys when you're bored at the range!

I love guns. One of my best friend's Dad collects them and has a ton of them. He's really cool, he lets us take anything we want and shoot at the gun range he built on his land in BFE..one of the perks of living in a small ass town

01-06-2010, 10:34 PM	#2271
tinpot Captain Drives: 05 E46 M3 Join Date: Sep 2009 Location: Houston, Texas Posts: 682 iTrader: (3)	Nawaaz – good talking with you tonight. I’m now subscribed to this thread in case any other issues come up __________________ FOR SALE: Vorsteiner Trunk \| Arkym CF Hood (PM me) \| Tinted Taillights (PM me) \| AutoPower Rollbar (PM Me)

01-06-2010, 11:47 PM	#2274
thatarchitect Second Lieutenant Drives: 08 E92 M3 6MT & 2008 Yamaha R6 Join Date: Aug 2009 Location: Dallas, Texas Posts: 264 iTrader: (0)	Can you guys see my sig? I just made one and it shows up under my profile but I dont see it in the forum... __________________

01-06-2010, 11:47 PM	#2275
thatarchitect Second Lieutenant Drives: 08 E92 M3 6MT & 2008 Yamaha R6 Join Date: Aug 2009 Location: Dallas, Texas Posts: 264 iTrader: (0)	Im a moron... Apparently it will only show up in messages you post after it has been made... __________________

01-07-2010, 03:06 PM	#2280
thatarchitect Second Lieutenant Drives: 08 E92 M3 6MT & 2008 Yamaha R6 Join Date: Aug 2009 Location: Dallas, Texas Posts: 264 iTrader: (0)	Hey Spicoli, 1. Right now I do not have the tracks offered with elevations. That would raise the price considerably for one and also it would be very hard to gather all that data for each track. However I can have that done as a special order if I can get my hands on the elevations for the track. I mainly was just trying to keep the price down on the basic models the best I could. 2. As far as other colors go, that is on a per order basis. The black is the standard and any other colors can be requested. The color you see will be formica so any color formica comes in can be done. It sounds like you are trying to possibly do multiple colors on the same track. Are these supposed to be side by side like the M3 badge all the way around the track? That would be extremely difficult but I can look into it. I know there are a million little different things that could be done with these but I finally had to stop pulling my hair out over it and just offer the product a certain way to get it out there. I think the feedback from you guys and others will help me gauge what most people are looking for. __________________

01-07-2010, 03:24 PM	#2282
Blake Banned Drives: Chevy Aveo Join Date: May 2008 Location: Parent's Basement Posts: 4,655 iTrader: (7)	brought the children out for playtime today Attached Images

01-07-2010, 02:11 PM	#2278
Blake Banned Drives: Chevy Aveo Join Date: May 2008 Location: Parent's Basement Posts: 4,655 iTrader: (7)	coming home tomorrow to watch the cowboys game with my buddies!

01-07-2010, 03:28 PM	#2283
JC919 Lieutenant Colonel Drives: 08 e92 M3 6MT Join Date: Sep 2008 Location: Houston & Lake Travis, TX Posts: 1,755 iTrader: (0)	^We have a lot more in common than I originally suspected architect, let me know when you have more info/pricing on the ring __________________ 2008 AW/Blk 6MT, Akrapovic Evolution, Evosport Pulley, ESS Tune, Dinan Camber Plates, H&R Springs, Braille LWB, Other Track Goodies, TRMotorsport MT1 18s w/Michelin PSS and Hoosier R6

01-07-2010, 04:14 PM	#2285
JC919 Lieutenant Colonel Drives: 08 e92 M3 6MT Join Date: Sep 2008 Location: Houston & Lake Travis, TX Posts: 1,755 iTrader: (0)	^When I get the new goodies on the AR and G3 I'll post up some pics. I really need to get an Eotech to transfer between the two __________________ 2008 AW/Blk 6MT, Akrapovic Evolution, Evosport Pulley, ESS Tune, Dinan Camber Plates, H&R Springs, Braille LWB, Other Track Goodies, TRMotorsport MT1 18s w/Michelin PSS and Hoosier R6

01-07-2010, 05:59 PM	#2286
Nawaaz Brigadier General Drives: . Join Date: Apr 2009 Location: . Posts: 4,647 iTrader: (0)	Yikes! Those guns struck me with fear and made me wet myself..

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search