Exhaust Cutouts Installed - Video Teaser

SS32 · 08-14-2009, 11:09 AM

I finally had the time to get my cutouts installed a couple days ago and couldn't be more pleased with the results. For ~$800 installed, I couldn't have a better exhaust note. Not to mention the fact that with the push of a button I can return to 100% stock. It's loud, but not obnoxious, and sounds great above 3k.

Quick shot of the turn downs while the car was still up on the lift

lucid · 08-14-2009, 12:37 PM

Nice. Good to hear everything fit. Can you do a shot from directly behind when the car's on the ground? You need to get us better vid/sound.

FCPGroton · 08-14-2009, 03:37 PM

+1, the video wasn't great because of the wind. They look awesome by the way.

greenie · 08-14-2009, 07:13 PM

Sounds great! Who supplied this for you?

gthirtyfizle · 08-14-2009, 07:16 PM

What tha hell is that?

gemini330zhp · 08-15-2009, 12:52 AM

Wow nice job but need better video clips to much wind.

JonLerd · 08-18-2009, 03:34 AM

do you have any problems with exhaust rattle or leaking at start up...i used to have one of these electronic valves but i must have gotten a bad one cus at start up it would leak a little and sounds raspy...it didnt say on my car for more than 2 days. If yours is doing well can you let me know where you got yours and how much. thanks.

MrHarris · 08-18-2009, 03:58 AM

Any loss in power/torque?

SupremeDTM · 12-02-2009, 09:41 PM

Quote:

Originally Posted by MrHarris

Any loss in power/torque?

^

///V\3Dude · 12-02-2009, 10:42 PM

video removed by user?:-(

SS32 · 12-03-2009, 11:29 AM

Quote:

Originally Posted by SupremeDTM

^

Nothing noticeable by the butt dyno

Quote:

Originally Posted by ///V\3Dude

video removed by user?:-(

Yeah, it was shitty quality and full of wind noise. I'll try and get another one up where you can actually hear it.

Definitive · 01-03-2010, 04:38 PM

Where did you get these? Looks like a nice way to make the car sound awsome, when you want it to!

D

Subw00er · 01-04-2010, 01:12 PM

Cool. Video doesn't work though - get us some better vids. It must sound a lot like mine. But do you have any drone with your valves pre-Helmholtz chamber like that??

The valves are the same as mine, race ready. I had some binding problems with mine (woudln't open fully) and they needed replacement - let us know if yours are ok down the road.

Tell us more about your install - where did you power the valves, do you use the wireless module or a switch?

Definitive · 01-05-2010, 07:01 PM

Where are you SS32???

jml · 01-08-2010, 09:44 PM

I've decided that this is more of a "safety" mod. With the cutouts open, I have yet to run across a deer in our deer infested neighborhood here in Austin.

sehrgut · 01-25-2010, 06:41 AM

Whatever happened to that video?

Trier Germany · 01-25-2010, 02:15 PM

+1

SS32 · 02-11-2010, 11:21 AM

I removed the video because I shot it with my iphone and the quality was horrible; you couldn't really hear much. I'll try and get out and get some better video this weekend.

Definitive · 02-11-2010, 12:07 PM

JML - What are these Redneck Cutouts? Is that just a term you coined for the set up? Are you also using the Race Ready, or is this another brand of cutouts?

D

gabe74gt · 02-11-2010, 12:45 PM

Quote:

Originally Posted by SS32

I finally had the time to get my cutouts installed a couple days ago and couldn't be more pleased with the results. For ~$800 installed, I couldn't have a better exhaust note. Not to mention the fact that with the push of a button I can return to 100% stock exhaust. It's loud, but not obnoxious, and sounds great above 3k.

Quick shot of the turn downs while the car was still up on the lift

I took this last night with my phone, the quality is absolutely horrible, and the sound gets distorted. However, you can get a sense for the tone, which IMO is amazing. I'll try to get some better video early next week; I'm headed to VIR for the weekend for the AMA race

that looks sweet

leemik · 02-11-2010, 03:11 PM

Looks like the cutouts were installed after the secondary cats and the resonator? Why not do it before the secondary cats and have it come out the sides? I would think the result woud be better performance and LOUDER lol..

--mike

SS32 · 02-11-2010, 03:28 PM

Quote:

Originally Posted by leemik

Looks like the cutouts were installed after the secondary cats and the resonator? Why not do it before the secondary cats and have it come out the sides? I would think the result woud be better performance and LOUDER lol..

--mike

It's plenty loud, trust me. I got a letter from the HOA about it being too loud, and I creep through the neighborhood. I talked to the guys at the shop about it, but there just isn't room. I have them mounted in the easiest/most vacant area under the car.

08-14-2009, 11:09 AM	#1
SS32 Major Drives: 2008 M3 Join Date: May 2007 Location: Wilmington, NC Posts: 1,431 iTrader: (0)	Exhaust Cutouts Installed - Video Teaser I finally had the time to get my cutouts installed a couple days ago and couldn't be more pleased with the results. For ~$800 installed, I couldn't have a better exhaust note. Not to mention the fact that with the push of a button I can return to 100% stock. It's loud, but not obnoxious, and sounds great above 3k. Quick shot of the turn downs while the car was still up on the lift __________________ V1 DIY - Blinder M45 DIY - Exhaust Cutouts - Removed Clutch Pedal Spring DIY - Fiamm Air Horns Last edited by SS32; 03-30-2010 at 10:15 PM.
	Tweet

08-14-2009, 12:37 PM	#2
lucid Major General Drives: E30 M3; Expedition Join Date: Apr 2007 Location: USA Posts: 8,037 iTrader: (0)	Nice. Good to hear everything fit. Can you do a shot from directly behind when the car's on the ground? You need to get us better vid/sound. __________________

08-14-2009, 03:37 PM	#3
FCPGroton Lieutenant Drives: Volvo 850 T5 Join Date: Aug 2009 Location: Old Saybrook, CT Posts: 461 iTrader: (0)	+1, the video wasn't great because of the wind. They look awesome by the way. __________________ FCP Groton Dan Clayton 877-634-0063 ext. 213\| info@fcpgroton.com FCP Euro - European Car Parts Specialists FCP Import - Import Replacement Car Parts

08-15-2009, 12:52 AM	#6
gemini330zhp Major Drives: 2008 M3 E90 Join Date: Jul 2005 Location: BergenCo NewJersey Posts: 1,181 iTrader: (0)	Wow nice job but need better video clips to much wind. __________________ 2008 Jet Black E90 M3 6SPD no sunroof and 18s to my specs

08-18-2009, 03:58 AM	#8
MrHarris yodog Drives: '86 Corolla Join Date: Jun 2007 Location: Diamond Bar, Ca Posts: 5,032 iTrader: (5) Garage List 2009 BMW [5.00]	Any loss in power/torque? __________________ 2009 E92 M3 \| Alpine White \| Black Extended \| Advan RS \| Turner Test Pipes \| Dinan Axle-Back \| OETuning \| Eibach Springs \| UUC SSK \| VRS Front Lip \| VRS Type I Diffuser \| Matte Black \| RPi Scoops \| MS Filter \| Yokohama AD08 \| F1 Pinnacle Special Thanks: Gintani \| OETuning \| eAs

08-14-2009, 07:13 PM	#4
greenie Private Drives: 2013 650i x-drive m-sport coup Join Date: Oct 2006 Location: Jenkintown, Pa Posts: 64 iTrader: (0)	Sounds great! Who supplied this for you?

08-14-2009, 07:16 PM	#5
gthirtyfizle Colonel Drives: E92 M3 AW Join Date: Jul 2008 Location: NYC Posts: 2,588 iTrader: (4)	What tha hell is that?

08-18-2009, 03:34 AM	#7
JonLerd Lieutenant Drives: Alpine White 335i coupe Join Date: Mar 2009 Location: Orange County / Los Angeles Posts: 541 iTrader: (3)	do you have any problems with exhaust rattle or leaking at start up...i used to have one of these electronic valves but i must have gotten a bad one cus at start up it would leak a little and sounds raspy...it didnt say on my car for more than 2 days. If yours is doing well can you let me know where you got yours and how much. thanks.

12-02-2009, 10:42 PM	#10
///V\3Dude I Drive Slow To Save Gas :D $///V\3Dude's Avatar$ Drives: 08 M3, MY11 STi Join Date: Jul 2009 Location: I <3 NY Posts: 467 iTrader: (2)	video removed by user?:-( __________________
$///V\3Dude is offline$

01-03-2010, 04:38 PM	#12
Definitive definitivecars.com Drives: 2011 E90 M3 - AW/FR Join Date: Aug 2006 Location: So Cal Posts: 3,411 iTrader: (3) Garage List 2011 E90 M3 [3.75] 2009 (Lease up Sept ... [0.00] 2007 (Lease up 6/19 ... [0.00] 2007 (Lease up Octo ... [0.00]	Where did you get these? Looks like a nice way to make the car sound awsome, when you want it to! D __________________ CCC - Camarillo Cars & Coffee - Weekly Ventura County Meet - 8pm - Coffee Bean on Arniell

01-04-2010, 01:12 PM	#13
Subw00er Bates '08 Interlagos Launch Drives: 08e92M, 03e46M Join Date: Nov 2005 Location: NY Posts: 1,198 iTrader: (2)	Cool. Video doesn't work though - get us some better vids. It must sound a lot like mine. But do you have any drone with your valves pre-Helmholtz chamber like that?? The valves are the same as mine, race ready. I had some binding problems with mine (woudln't open fully) and they needed replacement - let us know if yours are ok down the road. Tell us more about your install - where did you power the valves, do you use the wireless module or a switch? __________________ Custom Exhaust Project: Bates Valvetronic exhaust: http://www.m3post.com/forums/showthread.php?t=253661 -- Exhaust Mod pics in here: http://www.flickr.com/photos/40236795@N03/ DON'T BUY Race Ready Performance electronic cutout valves. Here's why: http://www.m3post.com/forums/showthr...40#post9589740

01-05-2010, 07:01 PM	#14
Definitive definitivecars.com Drives: 2011 E90 M3 - AW/FR Join Date: Aug 2006 Location: So Cal Posts: 3,411 iTrader: (3) Garage List 2011 E90 M3 [3.75] 2009 (Lease up Sept ... [0.00] 2007 (Lease up 6/19 ... [0.00] 2007 (Lease up Octo ... [0.00]	Where are you SS32??? __________________ CCC - Camarillo Cars & Coffee - Weekly Ventura County Meet - 8pm - Coffee Bean on Arniell

01-08-2010, 09:44 PM	#15
jml Captain Drives: E90M3 Join Date: Dec 2008 Location: Austin, TX Posts: 880 iTrader: (2)	I've decided that this is more of a "safety" mod. With the cutouts open, I have yet to run across a deer in our deer infested neighborhood here in Austin. __________________ Britax Carseat \| Diaper Kit \| Redneck Cutouts \| Turner Studs \| Bassified Individual Audio

01-25-2010, 06:41 AM	#16
sehrgut Major Drives: emthree Join Date: Oct 2009 Location: socal Posts: 1,034 iTrader: (1)	Whatever happened to that video?

01-25-2010, 02:15 PM	#17
Trier Germany Banned Drives: 2009 E-90 M3 space gray Join Date: Nov 2008 Location: Deutschland KreisTrier auf Autobahn 64 & Tucson AZ Posts: 1,085 iTrader: (1)	+1

02-11-2010, 11:21 AM	#18
SS32 Major Drives: 2008 M3 Join Date: May 2007 Location: Wilmington, NC Posts: 1,431 iTrader: (0)	I removed the video because I shot it with my iphone and the quality was horrible; you couldn't really hear much. I'll try and get out and get some better video this weekend. __________________ V1 DIY - Blinder M45 DIY - Exhaust Cutouts - Removed Clutch Pedal Spring DIY - Fiamm Air Horns

02-11-2010, 12:07 PM	#19
Definitive definitivecars.com Drives: 2011 E90 M3 - AW/FR Join Date: Aug 2006 Location: So Cal Posts: 3,411 iTrader: (3) Garage List 2011 E90 M3 [3.75] 2009 (Lease up Sept ... [0.00] 2007 (Lease up 6/19 ... [0.00] 2007 (Lease up Octo ... [0.00]	JML - What are these Redneck Cutouts? Is that just a term you coined for the set up? Are you also using the Race Ready, or is this another brand of cutouts? D __________________ CCC - Camarillo Cars & Coffee - Weekly Ventura County Meet - 8pm - Coffee Bean on Arniell

02-11-2010, 03:11 PM	#21
leemik Major Drives: 2013 LRP M3 Coupe Join Date: Jan 2009 Location: Quincy, MA Posts: 1,182 iTrader: (2) Garage List 2013 BMW M3 [4.50]	Looks like the cutouts were installed after the secondary cats and the resonator? Why not do it before the secondary cats and have it come out the sides? I would think the result woud be better performance and LOUDER lol.. --mike __________________ 350Z \| M3 \| LRP M3

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search