Fabspeed X-Pipe w/ Primary Cat-Delete?

rockd · 11-27-2009, 12:02 PM

Can anyone point me to a set of primary cat-delete pipes (test pipes) that will work with the Fabspeed x-pipe?

rockd · 11-27-2009, 02:35 PM

After a bit of searching, it seems that the RPi cat-delete pipes *MAY* work with the Fabspeed xpipe. Not sure though... anybody tried it?

aus · 11-27-2009, 03:58 PM

Don't they (Fabspeed) have their own cat-delete pipes?

SoCalM3Mang · 11-27-2009, 04:55 PM

Quote:

Originally Posted by rockd

Can anyone point me to a set of primary cat-delete pipes (test pipes) that will work with the Fabspeed x-pipe?

IN all honesty, would you need them?

According to Turner Motorsports, you wouldn't.

http://www.turnermotorsport.com/html..._ID=TEN9046MTP

X-Pipe is probably better with HFC's in place of the OEM Cats which are way more restrictive.

rockd · 11-27-2009, 05:35 PM

Quote:

Originally Posted by aus

Don't they (Fabspeed) have their own cat-delete pipes?

No, they only have high flow cats...

Quote:

Originally Posted by SoCalM3Mang

IN all honesty, would you need them?

According to Turner Motorsports, you wouldn't.

http://www.turnermotorsport.com/html..._ID=TEN9046MTP

X-Pipe is probably better with HFC's in place of the OEM Cats which are way more restrictive.

I don't think you understood me correctly. I wanna run NO cats and NO resonators at all. I already have the non-resonated Fabspeed Xpipe. Now I want to know which primary cat-delete will clamp directly to the xpipe.

SupremeDTM · 11-30-2009, 02:48 AM

i remember hearing somewhere u can have fabspeed make you a set.

Singletrack · 11-30-2009, 03:22 PM

I'm not aware of any. I'm sure fabspeed could make you some in their existing jig. Good luck.

11-27-2009, 12:02 PM	#1
rockd Drives: '11 Z4 35i M-Sport 6MT Join Date: Apr 2009 Location: San Francisco Posts: 531 iTrader: (11)	Fabspeed X-Pipe w/ Primary Cat-Delete? Can anyone point me to a set of primary cat-delete pipes (test pipes) that will work with the Fabspeed x-pipe?
	Tweet

11-27-2009, 03:58 PM	#3
aus Major General Drives: M3 Join Date: Jul 2005 Location: Seal Beach, CA Posts: 6,161 iTrader: (5)	Don't they (Fabspeed) have their own cat-delete pipes? __________________ Let me get this straight... You are swapping out parts designed by some of the top engineers in the world because some guys sponsored by a company told you it's "better??" But when you ask the same guy about tracking, "oh no, I have a kid now" or "I just detailed my car." or "i just got new tires."

11-30-2009, 02:48 AM	#6
SupremeDTM MEISTERWATCHES.COM Drives: SG E92 M3 Join Date: Jun 2008 Location: Socal Posts: 261 iTrader: (0)	i remember hearing somewhere u can have fabspeed make you a set. __________________ \| SG E92 M3 \| CF Roof \| Fox Red Extended \| BBS LM / BBS LM-R \| H&R \| 3D Design \| Fabspeed \| RPI \| ACS \| DTM Autobody \| MEISTERWATCHES.COM

11-30-2009, 03:22 PM	#7
Singletrack 4th down; 4th quarter? Renegade. Drives: 09 SSII E92 M3; 12 AW X5d Join Date: Aug 2008 Location: Pittsburgh, PA Posts: 3,800 iTrader: (3)	I'm not aware of any. I'm sure fabspeed could make you some in their existing jig. Good luck. __________________ Singletrack's M3 iND/Singletrack's X5d

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

11-27-2009, 02:35 PM	#2
rockd Drives: '11 Z4 35i M-Sport 6MT Join Date: Apr 2009 Location: San Francisco Posts: 531 iTrader: (11)	After a bit of searching, it seems that the RPi cat-delete pipes MAY work with the Fabspeed xpipe. Not sure though... anybody tried it?