Finally got my PSW

Boost3dm3 · 10-16-2009, 09:21 PM

Installed myself with errors (coil spring cartridge damaged but i believe originally defective), After new cartridge was installed by dealer everything working flawlessly.

Shareefo · 10-16-2009, 09:41 PM

Congrats! Its an amazingly fun steering wheel. Just make sure you keep your eyes on the road! Almost hit a truck trying to see the most Gs I can hit.

novablackm3 · 10-16-2009, 10:06 PM

picking mine up from tischer tomorrow ! any pointers on the install?

Boost3dm3 · 10-17-2009, 01:04 AM

yea its a big risk doing it yourself. It can be done, I installed mine flawlessly using the official instructions and the ones provided by doba but the real risk is that if something goes wrong you may get screwed. In my situation I bought my wheel also from tischer and after installing got two errors which were the passenger restraint system malfunction and the multifunction buttons on the steering wheel were not working. The oled on the steering wheel itself worked fine and I could see my rpms and other data. After doing a lot of diagnosing I narrowed it down to the coil spring cartridge. For some reason the signals were not going through. I contacted tischer and unfortunately they can't exchange it as defective without a bmw technician saying its defective. Here lies the dilemma, because I installed the wheel myself, any technician will and did in my case say that it was installation error that caused the coil spring cartridge to be damaged but of course I took the utmost care and precision in installing it into my car. Who has the last say? BMW of course so BMW 1 Me 0 . Really tho I think nobody can actually prove anything I mean whos to say it was or wasnt a factory defect. If everything goes smoothly then its all fine but anything and I MEAN ANYTHING goes wrong you can be in some deep shiets. I had no choice but to take the car into the dealership and $300+ later my steering wheel and buttons work with no error messages and the cause was a manufacturers defect in the coil spring cartridge according to me and a installation error according to the dealership.

Most importantly though be careful and take your time or just hire someone to do it. You can contact pseto or dondon on e90post for the name of a installer that works at tischer and will do it on the side.

rav7ks · 10-17-2009, 01:17 PM

Glad to hear your problem got taken care of.
I have heard of many problems with this install but I haven't heard of problems with defective coil spring cartidges. This install can be difficult as there is the potential to break anyone of the connectors as they can be difficult to remove. I had broken one of them and I had to buy a new one from Tischer.
BTW many dealers will say that it has to be programmed etc and try to charge for it. No programming is necessary unless you remove the steering wheel angle sensor which will result in multiple errors. That is the most important step and as outlined in the step by step in the DIY by Doba, the sensor is not to be removed from the steering assembly.

pseto · 10-17-2009, 02:20 PM

its about time the mods start coming

DoNDoN · 10-18-2009, 07:59 PM

You are still alive? I havent seen you in a while.

The new mod looks good.

BTW dont you think is is time to take off that blue sticker on your dead pedal?

novablackm3 · 10-18-2009, 10:40 PM

just put mine in as well + fabspeed XFC + X pipe + afe

love it!!

Boost3dm3 · 10-19-2009, 01:08 PM

Quote:

Originally Posted by DoNDoN

You are still alive? I havent seen you in a while.

The new mod looks good.

BTW dont you think is is time to take off that blue sticker on your dead pedal?

yea i'm still alive been pretty busy with work and NO I REFUSE TO TAKE THE BLUE STICKER OFF! I'll see you around sometime im sure.

SlammedR8 · 10-19-2009, 01:17 PM

i love your blue dead pedal

novablackm3 · 10-25-2009, 09:17 PM

spray it w/ 3m scotchgard. i put that shit on everything

bavarian19 · 10-26-2009, 07:14 AM

looks good!

Boost3dm3 · 10-26-2009, 08:58 AM

3m scotchgard on the steering wheel?????

10-16-2009, 09:21 PM	#1
Boost3dm3 Lieutenant 11 Rep 470 Posts Drives: E92 M3 Join Date: Sep 2007 Location: DC Metro iTrader: (0)	Finally got my PSW Installed myself with errors (coil spring cartridge damaged but i believe originally defective), After new cartridge was installed by dealer everything working flawlessly. Attached Images __________________ Become a BMW CCA member; please use member #405205 as a reference . Click here to join online
	Appreciate 0 Tweet Quote

10-16-2009, 09:41 PM	#2
Shareefo Shogun 7 Rep 66 Posts Drives: '08 Alpine White/Fox Red M3 Join Date: Jan 2008 Location: NoVA/DC Metro iTrader: (0)	Congrats! Its an amazingly fun steering wheel. Just make sure you keep your eyes on the road! Almost hit a truck trying to see the most Gs I can hit.
	Appreciate 0 Quote

10-16-2009, 10:06 PM	#3
novablackm3 Captain 27 Rep 705 Posts Drives: e92 m3 , e70 x5m Join Date: Mar 2009 Location: Northern VA iTrader: (3)	picking mine up from tischer tomorrow ! any pointers on the install? __________________ Alpine White E70 11 X5M - K&N Filter , STI Mag , LI , Ultimate DP , Megan Exhaust , AA Tune Jerez Black E92 10 m3 - STI Mag\| LI \| RE SSK \| AFE Filter \| Fabspeed XFC / Xpipe \| AA ECU 1.5v \| BMW PSW \| \| Envy Charger \| Megan Exhaust \| Mich SuperSport Jetblack E92 08 m3 - V1 \| RE SSK \| RR Scoops \| AFE Filter \| AA ECU <Retired>
	Appreciate 0 Quote

10-17-2009, 01:04 AM	#4
Boost3dm3 Lieutenant 11 Rep 470 Posts Drives: E92 M3 Join Date: Sep 2007 Location: DC Metro iTrader: (0)	yea its a big risk doing it yourself. It can be done, I installed mine flawlessly using the official instructions and the ones provided by doba but the real risk is that if something goes wrong you may get screwed. In my situation I bought my wheel also from tischer and after installing got two errors which were the passenger restraint system malfunction and the multifunction buttons on the steering wheel were not working. The oled on the steering wheel itself worked fine and I could see my rpms and other data. After doing a lot of diagnosing I narrowed it down to the coil spring cartridge. For some reason the signals were not going through. I contacted tischer and unfortunately they can't exchange it as defective without a bmw technician saying its defective. Here lies the dilemma, because I installed the wheel myself, any technician will and did in my case say that it was installation error that caused the coil spring cartridge to be damaged but of course I took the utmost care and precision in installing it into my car. Who has the last say? BMW of course so BMW 1 Me 0 . Really tho I think nobody can actually prove anything I mean whos to say it was or wasnt a factory defect. If everything goes smoothly then its all fine but anything and I MEAN ANYTHING goes wrong you can be in some deep shiets. I had no choice but to take the car into the dealership and $300+ later my steering wheel and buttons work with no error messages and the cause was a manufacturers defect in the coil spring cartridge according to me and a installation error according to the dealership. Most importantly though be careful and take your time or just hire someone to do it. You can contact pseto or dondon on e90post for the name of a installer that works at tischer and will do it on the side. __________________ Become a BMW CCA member; please use member #405205 as a reference . Click here to join online
	Appreciate 0 Quote

10-17-2009, 01:17 PM	#5
rav7ks First Lieutenant 7 Rep 382 Posts Drives: e92 M3 Join Date: Sep 2008 Location: MD iTrader: (0) Garage List 08 M3 [0.00]	Glad to hear your problem got taken care of. I have heard of many problems with this install but I haven't heard of problems with defective coil spring cartidges. This install can be difficult as there is the potential to break anyone of the connectors as they can be difficult to remove. I had broken one of them and I had to buy a new one from Tischer. BTW many dealers will say that it has to be programmed etc and try to charge for it. No programming is necessary unless you remove the steering wheel angle sensor which will result in multiple errors. That is the most important step and as outlined in the step by step in the DIY by Doba, the sensor is not to be removed from the steering assembly.
	Appreciate 0 Quote

10-17-2009, 02:20 PM	#6
pseto Major General 127 Rep 6,948 Posts Drives: M3 E92 ZCP, M Roadster, X5 4.4 Join Date: Jun 2006 Location: Columbia, MD iTrader: (4)	its about time the mods start coming __________________ Paul Seto - BMW Car Club of America National Capital Chapter (MD/DC/NoVA), President & Social Chairman Become a BMW CCA member & reference my member# 339225 Join our NCC Facebook Page
	Appreciate 0 Quote

10-18-2009, 07:59 PM	#7
DoNDoN Colonel 35 Rep 2,037 Posts Drives: 2008 E92 M3 AW Join Date: Jun 2008 Location: NoVA iTrader: (1)	You are still alive? I havent seen you in a while. The new mod looks good. BTW dont you think is is time to take off that blue sticker on your dead pedal? __________________
	Appreciate 0 Quote

10-18-2009, 10:40 PM	#8
novablackm3 Captain 27 Rep 705 Posts Drives: e92 m3 , e70 x5m Join Date: Mar 2009 Location: Northern VA iTrader: (3)	just put mine in as well + fabspeed XFC + X pipe + afe love it!! __________________ Alpine White E70 11 X5M - K&N Filter , STI Mag , LI , Ultimate DP , Megan Exhaust , AA Tune Jerez Black E92 10 m3 - STI Mag\| LI \| RE SSK \| AFE Filter \| Fabspeed XFC / Xpipe \| AA ECU 1.5v \| BMW PSW \| \| Envy Charger \| Megan Exhaust \| Mich SuperSport Jetblack E92 08 m3 - V1 \| RE SSK \| RR Scoops \| AFE Filter \| AA ECU <Retired>
	Appreciate 0 Quote

10-19-2009, 01:17 PM	#10
SlammedR8 Major General 205 Rep 5,377 Posts Drives: 2016 BMW X5d + 2016 RR TD6 Join Date: Jul 2007 Location: Toronto iTrader: (2)	i love your blue dead pedal __________________ 2016 BMW X5d - Black Sapphire on Terra 2016 Range Rover HSE TD6-White on Ivory 2010 Audi R8 V10 Coupe 6MT-White on Red - gone but not forgotten
	Appreciate 0 Quote

10-25-2009, 09:17 PM	#11
novablackm3 Captain 27 Rep 705 Posts Drives: e92 m3 , e70 x5m Join Date: Mar 2009 Location: Northern VA iTrader: (3)	spray it w/ 3m scotchgard. i put that shit on everything __________________ Alpine White E70 11 X5M - K&N Filter , STI Mag , LI , Ultimate DP , Megan Exhaust , AA Tune Jerez Black E92 10 m3 - STI Mag\| LI \| RE SSK \| AFE Filter \| Fabspeed XFC / Xpipe \| AA ECU 1.5v \| BMW PSW \| \| Envy Charger \| Megan Exhaust \| Mich SuperSport Jetblack E92 08 m3 - V1 \| RE SSK \| RR Scoops \| AFE Filter \| AA ECU <Retired>
	Appreciate 0 Quote

10-26-2009, 07:14 AM	#12
bavarian19 General 286 Rep 18,855 Posts Drives: Car Join Date: Mar 2005 Location: VA iTrader: (23)	looks good!
	Appreciate 0 Quote

10-26-2009, 08:58 AM	#13
Boost3dm3 Lieutenant 11 Rep 470 Posts Drives: E92 M3 Join Date: Sep 2007 Location: DC Metro iTrader: (0)	3m scotchgard on the steering wheel????? __________________ Become a BMW CCA member; please use member #405205 as a reference . Click here to join online
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search