Bluetooth not allowing car to turn off electronics?

Nucking Futs! · 11-19-2008, 02:06 AM

So everytime I'm on a phone call (in bluetooth mode) then I turn off the car (hit the engine start button twice), everything turns off except for the bluetooth when I'm still on the call. In my friend's Lexus & my other vehicle w/an aftermarket headunit (w/bluetooth), all you gotta do is tap a button on the screen to transfer the call to the phone & then turn off the car. I did this (transfer call to phone) but yet when I hit the engine start button to turn off the electronics, it won't let me since the screen is still in bluetooth mode. My question is, what am I doing wrong here? When I get out of the car, I really don't want to tell the person on the phone I'll call them right back just b/c I have to hangup the phone (while in bluetooth mode), turn off electronics (hit engine start button) then call them back. Thx!

apw2607 · 11-19-2008, 11:41 AM

With the BMW, you use the handset to route the audio from the car back to the handset.

With some handsets when you get back into the car, the audio with route through the car automatically ... and with some you need to manually switch it. If you have a cradle, you can push the audio toggle button to switch between handset and car.

Nucking Futs! · 11-19-2008, 12:26 PM

Quote:

Originally Posted by apw2607

With the BMW, you use the handset to route the audio from the car back to the handset.

With some handsets when you get back into the car, the audio with route through the car automatically ... and with some you need to manually switch it. If you have a cradle, you can push the audio toggle button to switch between handset and car.

I did route the audio from the car back to the handset (iPhone) yet I still can't turn off the electronics (nav. screen, etc.). I have to end the call then I can turn off the electronics. I don't have a cradle/adapter.

apw2607 · 11-19-2008, 06:23 PM

Ok, so once the audio is routed back to the phone, even if i-Drive fails to shutdown properly, you can leave the car, lock it with comfort access or the key fob and i-Drive will eventually go to sleep. I wouldn't worry about it.

Gemcoska · 11-24-2008, 03:08 PM

agreed, but I have had all those frustrating problems before also. Even more annoying, when you switch from bluetooth to your handset, the radio comes on blasting. I could never get the bluetooth to pick up a call while already on one. For instance, I'd talk on the phone, walk to my car, get in and start up. The handset would say its connected to blue tooth, I wouldn't be able to hear anything from my handset, the blue tooth from the idrive says its connected, but no sound. Sucks

Nucking Futs! · 11-24-2008, 03:57 PM

Quote:

Originally Posted by apw2607

Ok, so once the audio is routed back to the phone, even if i-Drive fails to shutdown properly, you can leave the car, lock it with comfort access or the key fob and i-Drive will eventually go to sleep. I wouldn't worry about it.

Thx for the info! When I switch it back to the handset, the screen is always on the bluetooth screen. I just worry that:

1) When I walk far enough away from the M3, bluetooth will cut off (since it's out of range) & disconnect my call or

2) When I walk away, lock the M3 & iDrive eventually turns itself off (like you said) then my call might get disconnected.

Can anyone verify these 2 situations won't happen? I'll try it later this week when I get back in town if I don't get a response by then.

Quote:

Originally Posted by Gemcoska

agreed, but I have had all those frustrating problems before also. Even more annoying, when you switch from bluetooth to your handset, the radio comes on blasting. I could never get the bluetooth to pick up a call while already on one. For instance, I'd talk on the phone, walk to my car, get in and start up. The handset would say its connected to blue tooth, I wouldn't be able to hear anything from my handset, the blue tooth from the idrive says its connected, but no sound. Sucks

I feel for you. I don't know about your setup but when I walk into the car already in a conversation, the M3's bluetooth will detect the bluetooth phone asap but I won't be able to hear anything for 1-2 mins also...then after those 1-2 mins I can hear the caller on the M3's speakers. Since I can't wait 1-2 mins for that to happen, the moment I start the car I just switch the call into the handset since the phone detects it's in bluetooth mode the moment you turn on the car then I just switch back into bluetooth mode after those 1-2 mins if that makes sense. Such a hassle, argh!!!

darren1713 · 03-07-2009, 10:03 AM

My phone also disconnects for 1-2 minutes when I first get in my car and I have to manually re-route the call back to the cell. I have had this problem with a Blackberry 8830 and a Blackberry 9530. Has anyone figured out how to fix this?

This only happens when I start the car after it is entirely shut down. When I first turn the ignition off the car goes into a sleep, but doesn't actually shut down for some time. This is apparent because the satellite radio turns back on immediately if I turn the ignition back on, and the bluetooth syncs immediately. I have to leave the car for 5-10 minutes for it to fully shut down, and then it takes ~30 second for the satellite radio to re-sync and 1-2 minutes for the bluetooth. Does anyone know how to get the car to fully shut down without waiting forever? I'm trying to prove to BMW that they have a problem...

11-19-2008, 02:06 AM	#1
Nucking Futs! Major Drives: E92 Melbourne red/black M3 Join Date: Feb 2008 Location: All over Dallas! Posts: 1,228 iTrader: (7)	Bluetooth not allowing car to turn off electronics? So everytime I'm on a phone call (in bluetooth mode) then I turn off the car (hit the engine start button twice), everything turns off except for the bluetooth when I'm still on the call. In my friend's Lexus & my other vehicle w/an aftermarket headunit (w/bluetooth), all you gotta do is tap a button on the screen to transfer the call to the phone & then turn off the car. I did this (transfer call to phone) but yet when I hit the engine start button to turn off the electronics, it won't let me since the screen is still in bluetooth mode. My question is, what am I doing wrong here? When I get out of the car, I really don't want to tell the person on the phone I'll call them right back just b/c I have to hangup the phone (while in bluetooth mode), turn off electronics (hit engine start button) then call them back. Thx! __________________ - Jimmy 07' GSJ-10 1GR-FE - Daily grind: Blacked out & modded for the streets! Closes thing to offroading I'll ever do is go over a curb...w/my V-rated truck summer tires! 08' E92 S65B40 (M-DCT 7-Speed) - Weekend cruiser: Volk & GruppeM FTW!!!
	Tweet

11-24-2008, 03:08 PM	#5
Gemcoska Sleepy Member, wishing I was on the road. Drives: 2008 BMW M3 Join Date: Feb 2008 Location: Redondo Beach, CA Posts: 266 iTrader: (0)	agreed, but I have had all those frustrating problems before also. Even more annoying, when you switch from bluetooth to your handset, the radio comes on blasting. I could never get the bluetooth to pick up a call while already on one. For instance, I'd talk on the phone, walk to my car, get in and start up. The handset would say its connected to blue tooth, I wouldn't be able to hear anything from my handset, the blue tooth from the idrive says its connected, but no sound. Sucks __________________ 2003 Ducati '996 2008 M3: Sparking Graphite, Red Fox Standard, 19s, Premium pkg, Tech pkg, Premium Enhanced Sound, HD Radio, Heated Front Seats.

03-07-2009, 10:03 AM	#7
darren1713 Registered Drives: 2008 E92 M3 Join Date: Mar 2009 Location: Florida Posts: 1 iTrader: (0)	Bluetooth Problems My phone also disconnects for 1-2 minutes when I first get in my car and I have to manually re-route the call back to the cell. I have had this problem with a Blackberry 8830 and a Blackberry 9530. Has anyone figured out how to fix this? This only happens when I start the car after it is entirely shut down. When I first turn the ignition off the car goes into a sleep, but doesn't actually shut down for some time. This is apparent because the satellite radio turns back on immediately if I turn the ignition back on, and the bluetooth syncs immediately. I have to leave the car for 5-10 minutes for it to fully shut down, and then it takes ~30 second for the satellite radio to re-sync and 1-2 minutes for the bluetooth. Does anyone know how to get the car to fully shut down without waiting forever? I'm trying to prove to BMW that they have a problem...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

11-19-2008, 11:41 AM	#2
apw2607 Major Drives: 2009 X5 35d Join Date: Apr 2006 Location: Seattle, WA, USA Posts: 1,297 iTrader: (0)	With the BMW, you use the handset to route the audio from the car back to the handset. With some handsets when you get back into the car, the audio with route through the car automatically ... and with some you need to manually switch it. If you have a cradle, you can push the audio toggle button to switch between handset and car.

11-19-2008, 06:23 PM	#4
apw2607 Major Drives: 2009 X5 35d Join Date: Apr 2006 Location: Seattle, WA, USA Posts: 1,297 iTrader: (0)	Ok, so once the audio is routed back to the phone, even if i-Drive fails to shutdown properly, you can leave the car, lock it with comfort access or the key fob and i-Drive will eventually go to sleep. I wouldn't worry about it.