ESS E9X M3 Supercharger (on GS Bildeler M3 project) - Page 3

Sedan_Clan · 01-08-2009, 04:58 PM

This is so hot!

HotLap · 01-08-2009, 05:46 PM

Quote:

Originally Posted by Jonmartin

Why does the baseline Tourqe curve say 353 Wtq? On a stock M3? Whats going on there?

Was wondering the same thing myself

I thought at stock we are in the 295 lbs torque ballpark?

Nevermind....

MMMazing07 · 01-08-2009, 05:55 PM

is that car in Sweden Romen

i ask due the winter tires WTF

pepper · 01-08-2009, 05:56 PM

Quote:

Originally Posted by JMD0977

An F/I M3 at 6 psi will put down about 550HP and 500Nm or 368.7 Lbs tq.
And the DCT can take upto 440 Lbs or 596.5 Nm. I dont see a problem.

thanks for that info. I was under the assumption that there is really been no DCT guinea pig yet, and that the numbers were just estimates ??

Roman@ESS · 01-08-2009, 07:03 PM

Quote:

Originally Posted by MMMazing07

is that car in Sweden Romen

i ask due the winter tires WTF

Somewhere in that land over there

Roman@ESS · 01-08-2009, 07:05 PM

Quote:

Originally Posted by pepper

thanks for that info. I was under the assumption that there is really been no DCT guinea pig yet, and that the numbers were just estimates ??

A DCT kit will be available.

pepper · 01-08-2009, 07:08 PM

Quote:

Originally Posted by Rom3n

A DCT kit will be available.

thanks for clearing that up

Oakleyguy · 01-09-2009, 09:08 AM

Quote:

Originally Posted by Rom3n

Pre-production product will always look a bit crude.

+1

Good work guys.

pepper · 01-09-2009, 10:19 PM

wait, only thing wrong with that video is there's a BMW in it, and it has more then 400 hp...

thought I heard that tune somewhere...

Socale92 · 01-10-2009, 02:43 AM

Quote:

Originally Posted by Rom3n

A DCT kit will be available.

were you at mfest in the sc'd white z4m? if so that car is so sweet, thanks for signing my copy of mle

FStop7 · 01-10-2009, 03:47 AM

Quote:

Originally Posted by Stankia

Very nice indeed. Where are all the 335 guys now bashing the M3 with their Vishnu software?

At the dealership because their cars went into limp mode.

KonigsTiger · 01-10-2009, 11:57 AM

Quote:

Originally Posted by FStop7

At the dealership because their cars went into limp mode.

RedlineMotorworks · 01-10-2009, 01:23 PM

Very nice.

Anyone know the second song in the video? I've heard it before...

positiveions · 01-11-2009, 03:56 PM

I will hold my peace 'til the final results.

Sales@ESS · 01-12-2009, 02:40 PM

Quote:

Originally Posted by JuniorDee

is it just me or does that SC setup look a bit crude?

The M3 in the video belongs to a race team. They wanted power, offered up their new M3, and it is just one more way ESS hard tests their products. The team came to the shop during R&D and took pictures they shouldn't have. Then they posted them on a small Norway forum they shouldn't have. But, when you gotta brag, I guess you gotta brag. The pics were not supposed to be made public (ESS doesn't like to show anything pre-production for the exact reason I just quoted you for).

What you see is not the finished product by any means. That is a hand-made TIG welded prototype manifold. The finished product will be much nicer. However, you do get to see the custom CNC'd flow-tuned individual velocity stacks

. They went through many shapes and sizes of those stacks to get the power curve they wanted. Attention to detail boys!

This wait will be worth it!

Jack28 · 01-13-2009, 05:03 AM

Sweet! Cant wait to see the finished product! ESS blowers are some good stuff

JanMyh · 01-13-2009, 08:43 AM

Here are a picture of the seats that BMW in Norway sponsored for the project

Not of the most racing kind, but still.......

KonigsTiger · 01-13-2009, 10:08 AM

Quote:

Originally Posted by JanMyh

Here are a picture of the seats that BMW in Norway sponsored for the project

Not of the most racing kind, but still.......

I personally love those seats, racy enough for me!!!!

pepper · 01-13-2009, 10:32 AM

^ someone said there re-releasing the seats in feb, so hopefully the make support for our car

JanMyh · 01-13-2009, 10:36 AM

We got a wheelset sponsored from AC Schnitzer in Germany....
9x20 in front, and 10x20 rear

Will only be used as a 'In Show' wheelset, we still will be using the black rims with a yellow stripe for racing...

phrozen06 · 01-13-2009, 03:01 PM

Great thread

Doc · 01-13-2009, 04:55 PM

Quote:

Originally Posted by Stankia

Very nice indeed. Where are all the 335 guys now bashing the M3 with their Vishnu software?

On the side of the road since their cars are overheating

01-11-2009, 03:56 PM	#58
positiveions Major General Drives: 09 MKV JETTA 2.5 & E90 M3 :) Join Date: Sep 2007 Location: La Verne, CA Posts: 8,838 iTrader: (1)	I will hold my peace 'til the final results. __________________

01-13-2009, 05:03 AM	#60
Jack28 HUSTLER Drives: E46 M3-E92 M3 Join Date: May 2006 Location: So/Ca Los Angeles Posts: 1,319 iTrader: (0)	Sweet! Cant wait to see the finished product! ESS blowers are some good stuff __________________ E92 M3 ZCP- AW/FR w/Extended Leather) Packages: ZCP, 6MT, Fully Loaded E46 M3 - AW/IR 6 Spd, Fully Loaded. 19'' BBS LM DBK, V-CSL C/F Bmpr, Botld, Diff, V-CSL Custum IR-CF Center Counsel, V-GTR Hood, Dixis Ti 76mm, Meisterschaft Ti Sec. 1&2, EvoSport Headers, CAI, D/A Chip, tck d/a, Alcantera Headliner with Imola Red Sttitching....

01-13-2009, 08:43 AM	#61
JanMyh New Member Drives: BMW of course!! Join Date: Jan 2009 Location: Norway Posts: 29 iTrader: (0)	BMW Performance seats Here are a picture of the seats that BMW in Norway sponsored for the project Not of the most racing kind, but still....... Attached Images

01-13-2009, 10:36 AM	#64
JanMyh New Member Drives: BMW of course!! Join Date: Jan 2009 Location: Norway Posts: 29 iTrader: (0)	Wheels.. We got a wheelset sponsored from AC Schnitzer in Germany.... 9x20 in front, and 10x20 rear Will only be used as a 'In Show' wheelset, we still will be using the black rims with a yellow stripe for racing... Attached Images

01-13-2009, 03:01 PM	#65
phrozen06 NA V8 Drives: 01 330ci, 08 E92 M3 DCT Join Date: Jan 2006 Location: 39°27'33"N 77°58'04"W W. Virgina, Kansas Posts: 1,086 iTrader: (1)	Great thread __________________ M3 DCT/Swift Spec R Springs/Macht Schnell Spacers/Megan Exhaust/Coming Soon: Test Pipes and BPM Stg 2 Tune People Who Say It Can't Be Done Should Not Interrupt Those Who Are Doing It

01-08-2009, 04:58 PM	#45
Sedan_Clan Capoeirista Extraordinaire! Drives: AW E92 M3 (prev. an E90 IB M3) Join Date: Jun 2006 Location: The Twilight Zone! Or running your plates... Posts: 4,433 iTrader: (10)	This is so hot!

01-08-2009, 05:55 PM	#47
MMMazing07 More than you can afford pal....ferrari Drives: Z4M Join Date: Aug 2007 Location: MD Posts: 1,472 iTrader: (0)	is that car in Sweden Romen i ask due the winter tires WTF

01-09-2009, 10:19 PM	#53
pepper Second Lieutenant Drives: M3 Join Date: Jan 2009 Location: 0 degrees Posts: 262 iTrader: (1)	wait, only thing wrong with that video is there's a BMW in it, and it has more then 400 hp... thought I heard that tune somewhere...

01-10-2009, 01:23 PM	#57
RedlineMotorworks Banned Drives: 6.2L F-150 Raptor Join Date: Sep 2007 Location: Redline Motorworks Posts: 2,502 iTrader: (19)	Very nice. Anyone know the second song in the video? I've heard it before...

01-13-2009, 10:32 AM	#63
pepper Second Lieutenant Drives: M3 Join Date: Jan 2009 Location: 0 degrees Posts: 262 iTrader: (1)	^ someone said there re-releasing the seats in feb, so hopefully the make support for our car

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search