Which pulley kit?

CatchM3 · 10-02-2008, 02:50 PM

AA Singnuture Pulley Kit

Or

Evosport Pulley Kit

Both kits look good but any suggestions?

Thank you.

SV Concepts III · 10-02-2008, 03:34 PM

Both are great setups, we will actually be doing a package deal with AA on their performance parts including the pulleys if you are looking to do more than just those as an upgrade.

noxredna · 10-02-2008, 03:42 PM

Will installing a pulley kit affect warranty of the car? will I run in to problems with maintenance and my dealership?

Considered installing this mod as well

SV Concepts III · 10-02-2008, 04:49 PM

No single modification can void your warranty altogether. The dealership has to prove that the modification caused a problem with your car so they cannot refuse to fix the radio because you have pulleys. With that said, if you install these incorrectly and it causes damage to the engine, that obviously would not be covered by BMW or the pulley manufacturer. These pulleys are a very straight forward upgrade and are compatible with the stock components so you won't have any issues but make sure the dealership does not cop out on warranty claims they are responsible for just because you have pulleys.

tom @ eas · 10-02-2008, 05:23 PM

Quote:

Originally Posted by CatchM3

AA Singnuture Pulley Kit

Or

Evosport Pulley Kit

Both kits look good but any suggestions?

Thank you.

There's a 3rd choice: Rogue.

Rogue Engineering - Power Pulleys - e9X M3
http://www.europeanautosource.com/pr...oducts_id=1952

We always have these in stock, those that are in SoCal are welcome to drop by to see them in person.

Quote:

Originally Posted by noxredna

Will installing a pulley kit affect warranty of the car? will I run in to problems with maintenance and my dealership?

Considered installing this mod as well

Thank you.

You'll be fine. The Rogue pulley also retains the factory hex drive adapter to give an OEM appearance.

CatchM3 · 10-02-2008, 09:03 PM

My apologize, Rogue included. Makes the decision even harder.

JMD0977 · 10-02-2008, 09:07 PM

Quote:

Originally Posted by tom @ eas

There's a 3rd choice: - Rogue.

+1
I got them and works great. They were the first to release them too.

KKSigua · 10-02-2008, 09:17 PM

+1 for the Active Autowerke. Works with my DCT.

Omar@ActiveAutowerke · 10-02-2008, 10:23 PM

Quote:

Originally Posted by KKSigua

+1 for the Active Autowerke. Works with my DCT.

OP you have been PMed.....

Even though developing this pulley design was one of the more simple products we have had to create over the years we did not take any shortcuts in the R&D process involved in creating this power pulley kit... We had the same goal in mind when designing this pulley kit which was offering our customers the perfect combination of performance and reliability then inviting them to "Come Play With Power". This system has been dyno tested, track tested and goes through an extensive coating process to ensure longevity and durability. Our R&D process also includes working with our partners worldwide to ensure optimum performance in various environments. After weeks of testing several pulley sizes our engineers decided on our current size, some smaller designs created overheating issues and some other pulley kits have proven not to maintain the harmonic balanced characteristics of the factory design. Active Autowerke has been in the business for 27+ years and will continue to design and support the best in BMW performance products for the true enthusiast.

Best Regards,

p.s. CatchM3 please stay in contact with Nick from JleviSW for more information on the product!

Sticky · 10-02-2008, 10:26 PM

Evosport is currently working on a DCT pulley using my car. It seems the 09's have a new type of pulley for the manual as well that is similar to the DCT so this new pulley will be necessary.

Ron@Modbargains · 10-03-2008, 12:58 PM

I'll add a 4th to this list. That I think most people will be really happy especially with its coming price point. It's not going to be as expensive as the others and will be readily available.... we'll have the RD pulley kit very soon.

Right now we have the AA pulley.

We will be posting the RD pulley on our site in about a week or so.

sg///M3 · 10-03-2008, 03:14 PM

Quote:

Originally Posted by Nick@Jlevi SW

Both are great setups, we will actually be doing a package deal with AA on their performance parts including the pulleys if you are looking to do more than just those as an upgrade.

You mean like software & pulley package?

Omar@ActiveAutowerke · 10-06-2008, 08:59 AM

Quote:

Originally Posted by sg///M3

You mean like software & pulley package?

I second that, Jlevi has great E9X M3 packages available with the top notch customer service to back it..

SV Concepts III · 10-06-2008, 11:33 AM

Quote:

Originally Posted by sg///M3

You mean like software & pulley package?

You bet, we are working with Active right now on the pricing

PunjabiM3 · 10-06-2008, 12:09 PM

Does the tension on the belt supplied with the pulley kits need to be adjusted or is it just a matter of swapping the pullies and putting the belt right on? Any install instructions available?

SV Concepts III · 10-06-2008, 12:24 PM

A new pulley belt is included so you do not need to adjust the tension.

Here is active's install guide: http://activeautowerke.com/pdf/Product77.pdf

tom @ eas · 10-06-2008, 12:34 PM

Quote:

Originally Posted by PunjabiM3

Does the tension on the belt supplied with the pulley kits need to be adjusted or is it just a matter of swapping the pullies and putting the belt right on? Any install instructions available?

Pulley will come with replacement belts, the tensioner will compensate for the difference.

Tragoulis · 10-06-2008, 03:44 PM

AA for sure!

The Shiekh · 10-06-2008, 05:08 PM

do u guys actually feel any gains?

tom @ eas · 10-06-2008, 05:51 PM

Quote:

Originally Posted by The Shiekh

do u guys actually feel any gains?

It's a bit of a trick question as the pulley doesn't really add HP, it frees up HP by reducing the amount of parasitic drag on the engine caused from the accessories.

Here's a picture of the Rogue pulley:

Dyno:

Expect about a 7-8hp increase after installation.

The Shiekh · 10-07-2008, 12:18 AM

yeah i understand that it frees up doesnt really gain hp. wow not bad for just a pulley on a na motor

ihyln · 10-07-2008, 01:09 AM

So is there a pulley kit that works with DCT? I remember reading that one fell out of a DCT test car. I'd prefer to avoid that from happening.

10-02-2008, 02:50 PM	#1
CatchM3 Major Drives: E90 M3 SSII Join Date: Jun 2008 Location: Los Angeles Posts: 1,000 iTrader: (1) Garage List 2008 E90 M3 [0.00]	Which pulley kit? AA Singnuture Pulley Kit Or Evosport Pulley Kit Both kits look good but any suggestions? Thank you. __________________ YoutTube Car Videos: CLICK ME
	Tweet

10-02-2008, 09:03 PM	#6
CatchM3 Major Drives: E90 M3 SSII Join Date: Jun 2008 Location: Los Angeles Posts: 1,000 iTrader: (1) Garage List 2008 E90 M3 [0.00]	My apologize, Rogue included. Makes the decision even harder. __________________ YoutTube Car Videos: CLICK ME

10-02-2008, 09:17 PM	#8
KKSigua Forever Modding! Drives: 08 JZB M3, M-DCT Join Date: Oct 2007 Location: Indianapolis Posts: 1,068 iTrader: (4)	+1 for the Active Autowerke. Works with my DCT. __________________ Advan F7, Vorst. GTS3 Bumper, Deck lid, AA Pulley, ECU 1.5, X-Pipe w/HFC, Eisenmann Black Series Race, CF Grills,Vents,Mirrors, BMW Perf. Steering Wheel, 09 iDrive Knob, Alum. Pedals, Euro Rear Fog & Side Mirrors, Lux H8, F1 Tint, Ventureshield, EAS Mirror Mod, , Gruppe M CAI, Dinan 3.62, Stage 3 susp. ACS CF side skirt, Escort 9500ix, Challenge CF rear diffuser, Kics R40 Stud Conv. Kit, Alekshop F&R Cam.

10-06-2008, 12:09 PM	#15
PunjabiM3 Lieutenant Colonel Drives: VO 1M Join Date: Mar 2008 Location: Tucson, AZ Posts: 1,673 iTrader: (1)	Does the tension on the belt supplied with the pulley kits need to be adjusted or is it just a matter of swapping the pullies and putting the belt right on? Any install instructions available? __________________ New ride ETA 2 weeks 2012 Audi A6 Prestige, Moonlight Blue 2009 Lexus ES350, Sparkling Graphite (wife's) Previous: 11 e82 1M, 07 997TT, 08 e92 M3, 06 997 C2S, 05 e46 M3 coupe, 03.5 e46 M3 cabrio

10-06-2008, 05:08 PM	#19
The Shiekh Second Lieutenant Drives: E92 M3 Join Date: Jul 2008 Location: Danville, CA Posts: 267 iTrader: (1)	do u guys actually feel any gains? __________________ -James aka The Shiekh 2008 E92 M3 6MT SSII/Silver Novillo/Sycamore BPU+ lol

10-02-2008, 03:34 PM	#2
SV Concepts III Lieutenant General Drives: BMW Duh Join Date: Apr 2005 Location: Santa Clara Posts: 17,029 iTrader: (13)	Both are great setups, we will actually be doing a package deal with AA on their performance parts including the pulleys if you are looking to do more than just those as an upgrade.

10-02-2008, 03:42 PM	#3
noxredna Captain Drives: 2008 BMW M3 Coupe, 2012 BMW M5 Join Date: Sep 2008 Location: Philadelphia & Singapore Posts: 668 iTrader: (0)	Will installing a pulley kit affect warranty of the car? will I run in to problems with maintenance and my dealership? Considered installing this mod as well

10-02-2008, 04:49 PM	#4
SV Concepts III Lieutenant General Drives: BMW Duh Join Date: Apr 2005 Location: Santa Clara Posts: 17,029 iTrader: (13)	No single modification can void your warranty altogether. The dealership has to prove that the modification caused a problem with your car so they cannot refuse to fix the radio because you have pulleys. With that said, if you install these incorrectly and it causes damage to the engine, that obviously would not be covered by BMW or the pulley manufacturer. These pulleys are a very straight forward upgrade and are compatible with the stock components so you won't have any issues but make sure the dealership does not cop out on warranty claims they are responsible for just because you have pulleys.

10-02-2008, 10:26 PM	#10
Sticky Banned Drives: E92 Jerez DCT M3 Join Date: Jan 2008 Location: Anaheim Hills / Malibu Posts: 2,244 iTrader: (0)	Evosport is currently working on a DCT pulley using my car. It seems the 09's have a new type of pulley for the manual as well that is similar to the DCT so this new pulley will be necessary.

10-03-2008, 12:58 PM	#11
Ron@Modbargains Drives: 996TT/ae86 Join Date: Aug 2005 Location: 1721 E. Lambert Rd #C, La Habra, CA 90631 Posts: 2,204 iTrader: (3)	I'll add a 4th to this list. That I think most people will be really happy especially with its coming price point. It's not going to be as expensive as the others and will be readily available.... we'll have the RD pulley kit very soon. Right now we have the AA pulley. We will be posting the RD pulley on our site in about a week or so.

10-06-2008, 12:24 PM	#16
SV Concepts III Lieutenant General Drives: BMW Duh Join Date: Apr 2005 Location: Santa Clara Posts: 17,029 iTrader: (13)	A new pulley belt is included so you do not need to adjust the tension. Here is active's install guide: http://activeautowerke.com/pdf/Product77.pdf

10-06-2008, 03:44 PM	#18
Tragoulis Registered Drives: E92 M3 Join Date: Jul 2008 Location: . Posts: 3 iTrader: (0)	AA for sure!

10-07-2008, 12:18 AM	#21
The Shiekh Second Lieutenant Drives: E92 M3 Join Date: Jul 2008 Location: Danville, CA Posts: 267 iTrader: (1)	yeah i understand that it frees up doesnt really gain hp. wow not bad for just a pulley on a na motor __________________ -James aka The Shiekh 2008 E92 M3 6MT SSII/Silver Novillo/Sycamore BPU+ lol

10-07-2008, 01:09 AM	#22
ihyln Banned Drives: M3post sucks Join Date: Apr 2008 Location: M3post sucks Posts: 3,386 iTrader: (1) Garage List 2008 M3 [0.00] 2002 530i [0.00]	So is there a pulley kit that works with DCT? I remember reading that one fell out of a DCT test car. I'd prefer to avoid that from happening.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search