BMW M3 Forum (E90 E92)

BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Go Back   M3Post - BMW M3 Forum > E90/E92 M3 Technical Topics > Wheels + Tires Sponsored by The Tire Rack
  TireRack

KEEP M3POST ALIVE BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER LINK!
Post Reply
 
Thread Tools Search this Thread
      09-13-2013, 01:33 PM   #243
MarkMizar
New Member
 
MarkMizar's Avatar
 
Drives: 2008 BMW 335i
Join Date: Feb 2013
Location: New York City

Posts: 9
iTrader: (0)

Rub / No Rub Index

Will a 19 X 10 rub on a 2008 BMW 335i Sedan?
MarkMizar is offline  
0
Reply With Quote
      09-13-2013, 11:51 PM   #244
chich
Private First Class
 
chich's Avatar
 
Drives: E90 M3 Sedan
Join Date: Jun 2013
Location: NJ

Posts: 160
iTrader: (0)

Car is an 08 e90 m3. recently put 10mm spacers on my front wheels which are 20x9 ET 28. I'm on lowering springs. The front tires now rub on the fender liner. If anyone could provide help on what to do it would be appreciated. The only things I can think of is either cutting the fender liner or running a smaller tire. The tires are 255/30/20. I thought I would be alright cause I see a lot of people on here running more aggressive front setups than me
chich is offline  
0
Reply With Quote
      09-14-2013, 01:55 AM   #245
808MGuy
Colonel
 
808MGuy's Avatar
 
Drives: 2009 E90 M3
Join Date: Jun 2008
Location: Oahu, Hawaii

Posts: 2,270
iTrader: (3)

Quote:
Originally Posted by chich View Post
Car is an 08 e90 m3. recently put 10mm spacers on my front wheels which are 20x9 ET 28. I'm on lowering springs. The front tires now rub on the fender liner. If anyone could provide help on what to do it would be appreciated. The only things I can think of is either cutting the fender liner or running a smaller tire. The tires are 255/30/20. I thought I would be alright cause I see a lot of people on here running more aggressive front setups than me
I'm on 20x9 ET28 in the front running 255/30 PS2s with no spacers and I'm as close you can get to rubbing without actually rubbing. You either need to remove the spacers or go to a 245/30.
808MGuy is offline  
0
Reply With Quote
      09-14-2013, 03:25 AM   #246
SUBFRAMERIPPER
Private First Class
 
SUBFRAMERIPPER's Avatar
 
Drives: 2009 E90
Join Date: Jun 2012
Location: Denver

Posts: 149
iTrader: (0)

What brand of tires are you running? I have 20x9 +23 255/30/20 dropped on H&Rs. No rubbing even at full lock.
SUBFRAMERIPPER is offline   United_States
0
Reply With Quote
      09-15-2013, 09:44 PM   #247
chich
Private First Class
 
chich's Avatar
 
Drives: E90 M3 Sedan
Join Date: Jun 2013
Location: NJ

Posts: 160
iTrader: (0)

Quote:
Originally Posted by SUBFRAMERIPPER View Post
What brand of tires are you running? I have 20x9 +23 255/30/20 dropped on H&Rs. No rubbing even at full lock.
they're michelin pilot sports
chich is offline  
0
Reply With Quote
      09-16-2013, 03:13 PM   #248
SUBFRAMERIPPER
Private First Class
 
SUBFRAMERIPPER's Avatar
 
Drives: 2009 E90
Join Date: Jun 2012
Location: Denver

Posts: 149
iTrader: (0)

Quote:
Originally Posted by chich View Post
they're michelin pilot sports
I hear Michelin's run a little wide. I have Vreds. Still, according to your offset and spacer size, you are only + 5 more than me. Is the rubbing severe or only at full lock? Over bumps?
SUBFRAMERIPPER is offline   United_States
0
Reply With Quote
      09-16-2013, 03:23 PM   #249
808MGuy
Colonel
 
808MGuy's Avatar
 
Drives: 2009 E90 M3
Join Date: Jun 2008
Location: Oahu, Hawaii

Posts: 2,270
iTrader: (3)

Quote:
Originally Posted by SUBFRAMERIPPER View Post
I hear Michelin's run a little wide. I have Vreds. Still, according to your offset and spacer size, you are only + 5 more than me. Is the rubbing severe or only at full lock? Over bumps?
I'm running 255/30 PS2s on the same size and offset wheels without spacers. They are so close that if I put a piece of double stick tape on the firewall side of the fender liner, the tire will rub the tape on full lock. PSS run a little wider than PS2s. With the addition of the spacer, I can see how it would rub. I used to run Vreds in the same size and I can tell you the PS2s are noticeably wider.
__________________
09 E90 M3 - Interlagos Blue / Black Novillo / Sycamore Anthracite / Eibach / HRE

808MGuy is offline  
0
Reply With Quote
      09-16-2013, 03:38 PM   #250
chich
Private First Class
 
chich's Avatar
 
Drives: E90 M3 Sedan
Join Date: Jun 2013
Location: NJ

Posts: 160
iTrader: (0)

Quote:
Originally Posted by SUBFRAMERIPPER View Post
I hear Michelin's run a little wide. I have Vreds. Still, according to your offset and spacer size, you are only + 5 more than me. Is the rubbing severe or only at full lock? Over bumps?
rubbing is pretty severe, it hits the back of the fender liner right after I begin to turn the wheel
chich is offline  
0
Reply With Quote
      09-16-2013, 03:58 PM   #251
SUBFRAMERIPPER
Private First Class
 
SUBFRAMERIPPER's Avatar
 
Drives: 2009 E90
Join Date: Jun 2012
Location: Denver

Posts: 149
iTrader: (0)

Quote:
Originally Posted by chich View Post
rubbing is pretty severe, it hits the back of the fender liner right after I begin to turn the wheel
Damn, looks like you are gonna have to pull those spacers. A 245/30/20 may not rub but the load rating may not be adequate. It sucks trying to get the perfect fitment. I wanted a 20x9 +17 from WORK but was told it was gonna take 6 months just to get the disk made.
SUBFRAMERIPPER is offline   United_States
0
Reply With Quote
      09-16-2013, 04:37 PM   #252
chich
Private First Class
 
chich's Avatar
 
Drives: E90 M3 Sedan
Join Date: Jun 2013
Location: NJ

Posts: 160
iTrader: (0)

Quote:
Originally Posted by SUBFRAMERIPPER View Post
Damn, looks like you are gonna have to pull those spacers. A 245/30/20 may not rub but the load rating may not be adequate. It sucks trying to get the perfect fitment. I wanted a 20x9 +17 from WORK but was told it was gonna take 6 months just to get the disk made.
yeah I will most likely take them off now until It's time for new tires and possibly go with a 245
chich is offline  
0
Reply With Quote
      09-16-2013, 08:53 PM   #253
SUBFRAMERIPPER
Private First Class
 
SUBFRAMERIPPER's Avatar
 
Drives: 2009 E90
Join Date: Jun 2012
Location: Denver

Posts: 149
iTrader: (0)

Quote:
Originally Posted by 808MGuy View Post
I'm running 255/30 PS2s on the same size and offset wheels without spacers. They are so close that if I put a piece of double stick tape on the firewall side of the fender liner, the tire will rub the tape on full lock. PSS run a little wider than PS2s. With the addition of the spacer, I can see how it would rub. I used to run Vreds in the same size and I can tell you the PS2s are noticeably wider.
What are your wheel and tire specs on the rear?
SUBFRAMERIPPER is offline   United_States
0
Reply With Quote
      09-17-2013, 01:45 AM   #254
W12x
Lieutenant
 
Drives: 2004 E53 X5, 2011 E92 M3
Join Date: Mar 2008
Location: Houston

Posts: 425
iTrader: (0)

Have anyone tried 18" TE37 with everything ZCP stock?

TE37 is 18x9.5 et22 and 8x10.5 et20, probably gonna use 255/265-35-18 front and 275/285-35-18 rear.
W12x is offline  
0
Reply With Quote
      09-25-2013, 12:21 PM   #255
2009awe92
Private
 
Drives: 2009 AW BMW M3
Join Date: Jul 2012
Location: california

Posts: 56
iTrader: (1)

will this setup work?

2009 e92 lowered on H&R race springs

F 19x9.5 ET18
R 19x11 ET22

looking to run 265/30/19 F and R 295/30/19 Michelin Pilot Super sports

thinking about switching the rears to 285 to be on the safe side but if 295 will work that would be great as i already have a set available.
2009awe92 is offline  
0
Reply With Quote
      09-28-2013, 05:31 PM   #256
bris2013m3
Private First Class
 
bris2013m3's Avatar
 
Drives: 2013 BMW M3
Join Date: Jul 2012
Location: Fort Bliss, TX

Posts: 161
iTrader: (0)

Garage List
2013 BMW M3  [0.00]
Just had Michelin Pilot Sport A/S 3 installed with 255/35/19 and 275/35/19 combination. I am running stock ZCP and stock rims and there is no rubbing. Took it to full extension in both directions and no rubbing.
bris2013m3 is offline   United_States
0
Reply With Quote
      10-17-2013, 06:45 PM   #257
M3ANMACHINE
Hella Functional
 
M3ANMACHINE's Avatar
 
Drives: 2004 BMW E46 M3
Join Date: Jan 2010
Location: Mission Viejo, CA

Posts: 1,530
iTrader: (5)

Guys, I am thinking of running 18x10 +25 up front with 275/35/18 NT01's on my E90 with Dinan Stage 1 Suspension.

Any idea if I will rub? I can't seem to find a definitive answer.

Thanks!
__________________

E90///M3 x 6MT x APEX x AE Performance x Bimmerworld x Dinan x Evolve x KW x Mode Carbon x PFC x TMS

M3ANMACHINE is offline   United_States
0
Reply With Quote
      10-17-2013, 06:53 PM   #258
slicer
Brigadier General
 
slicer's Avatar
 
Drives: '13 E92 M3
Join Date: Jan 2009
Location: San Diego, CA

Posts: 3,601
iTrader: (10)

Quote:
Originally Posted by M3ANMACHINE View Post
Guys, I am thinking of running 18x10 +25 up front with 275/35/18 NT01's on my E90 with Dinan Stage 1 Suspension.

Any idea if I will rub? I can't seem to find a definitive answer.

Thanks!
You will be ok but you may need some negative camber in the front (as close to -2 degrees as you can).
__________________
KW Clubsport 3-way, Akrapovic Evolution, ESS Tune, StopTech Trophy, IND Euro Bumper & Black Mirror Covers, Turner Motorsports Studs/Lugs & Delrin Diff Bushings, MRF Solid Sub-Frame Bushings, RD Sport Sways, Recaro Profi-XL & Planted Seat Brackets, BMW Performance Carbon Fiber Interior Trim, BMW Edition Grills/Gills, Mode Carbon GT4 Splitter & GTS Wing, Advan TC3 (18x9.5/10.5), BBS E05 (18x10/11), G-Force Rivals (275/295)
slicer is offline  
0
Reply With Quote
      10-17-2013, 06:56 PM   #259
M3ANMACHINE
Hella Functional
 
M3ANMACHINE's Avatar
 
Drives: 2004 BMW E46 M3
Join Date: Jan 2010
Location: Mission Viejo, CA

Posts: 1,530
iTrader: (5)

Quote:
Originally Posted by slicer View Post
You will be ok but you may need some negative camber in the front (as close to -2 degrees as you can).
Thanks. I am not sure what I am at at this moment, but I will be sure to find out.

Much appreciated!
__________________

E90///M3 x 6MT x APEX x AE Performance x Bimmerworld x Dinan x Evolve x KW x Mode Carbon x PFC x TMS

M3ANMACHINE is offline   United_States
0
Reply With Quote
      10-17-2013, 08:38 PM   #260
1MOREMOD
2014 Track Days - 9|Ridge 1:52:25|Pacific 1:35:72
 
1MOREMOD's Avatar
 
Drives: Race car->
Join Date: Mar 2009
Location: check your mirrors

Posts: 11,943
iTrader: (5)

major rub.
Attached Images
 
__________________

02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings & bearings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW race|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs|
1MOREMOD is offline   United_States
0
Reply With Quote
      10-27-2013, 04:54 PM   #261
E93 Shifter
New Member
 
Drives: E93 M3
Join Date: Oct 2013
Location: Atlanta, GA

Posts: 19
iTrader: (4)

Wanting to go with this set up. Can someone chime in and let me know if I will have any issues. e93 m3 stock suspension but will be adding kw sleeve soon

Wheels dpe sp-sc16
20 x 9 f
20 x 11 r

Tires:
Nitto invo
255/30/20 f
275/30/20 r
E93 Shifter is offline  
0
Reply With Quote
      10-27-2013, 06:09 PM   #262
micha3l
Lieutenant
 
micha3l's Avatar
 
Drives: 2011 BMW M3
Join Date: Dec 2009
Location: Brisbane, Australia

Posts: 501
iTrader: (0)

Wheels
Forgestar CF5V
Front: 19 x 9.5 et 22
Rear: 19 x 11 et 30

Tires
Bridgestone RE-11
Front: 275/30/19
Rear: 305/30/19

No rubbing in the rear, front only rubs on full lock on the back part of the fender liner.
Attached Images
   
__________________


2011 BMW M3 - Mineral White - VF620 Supercharger - Gintani Sport Valved Exhaust - Harrop BBK - Arykym Front lip and Diffuser - KW Sleeve over kit - Forgestar CF5V Wheels
2009 BMW 135i - Space Grey - 11.841 @ 117.81mph - SOLD
micha3l is offline   Australia
0
Reply With Quote
      11-04-2013, 02:37 PM   #263
M3ANMACHINE
Hella Functional
 
M3ANMACHINE's Avatar
 
Drives: 2004 BMW E46 M3
Join Date: Jan 2010
Location: Mission Viejo, CA

Posts: 1,530
iTrader: (5)

Quote:
Originally Posted by slicer View Post
You will be ok but you may need some negative camber in the front (as close to -2 degrees as you can).
I think I have decided to stick with RS3's on the 18x10's up front.

I will likely just purchase some GC Plates for some more negative camber up front as well
__________________

E90///M3 x 6MT x APEX x AE Performance x Bimmerworld x Dinan x Evolve x KW x Mode Carbon x PFC x TMS

M3ANMACHINE is offline   United_States
0
Reply With Quote
      11-21-2013, 11:55 PM   #264
shane060
Private
 
Drives: 2011 MR M3 DCT
Join Date: Nov 2009
Location: SA TX

Posts: 87
iTrader: (1)

Garage List
2011 M3  [0.00]
Anyone know if I will rub with a 12mm spacer on my rear setup, 2011 M3 non zcp with stock EDC suspension with 275 35 19 on Pss?
shane060 is offline  
0
Reply With Quote
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 08:21 AM.




m3post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST