335i v M5

[Mattscott]

Originally Posted by schneid4323

You posted it on M5boards, you insulted me as a driver, you misqouted me, Sorry i was wrong about RFT's and i said i wasnt sure about the p300 right after i said it in the post. I mean wtf this is the gayest thing on e90post, for the reason that half the idiots who are like NO WAY!!!!! drive 328's and 325's, to them, they can shut up, go get a 335 kk? The majority of 335i owners, who know whats going on in our world with our engine, know whats up, but you get the ignorant few. It's upseting and annyoing.
Perhaps I do have you confused but I come home to your ignorant and childish posts.

I have a 335, along with a lot of other people, I don't believe you, and it seems like they don't either

[schneid4323]

Originally Posted by Mattscott

I have a 335, along with a lot of other people, I don't believe you, and it seems like they don't either

Maybe I should revise that to the 328 owners and the 335 in cali stuck with 91 octane.

[Nikki]

DRA-MA!

[sflgator]

Originally Posted by Artz 330

your buddy cant drive. Sorry. But than again. You are on the other side of the US.

Maybe off topic a bit, but Artz 330, I think you have a slow PROcede 335i. Did you dyno your car before/after PROcede install? According to other PROcede 335i accounts (including recorded runs), the Z4M just isn't as fast as a PROcede 335i; therefore, I really think your 335i might just be a bit slower than most others. If my car can pull on an E60 M5 from 0-80mph, then I'm pretty sure I can beta a Z4M as well through at least that speed, if not the 1/4 mi. and possibly beyond.

btw -- just looked up the Z4M timeslips on dragtimes.com...

http://www.dragtimes.com/BMW--Z4-M-C...ag-Racing.html

...more like stock 335i 1/4 mi. times; not even close to PROcede 335i times.

[Artz 330]

Originally Posted by schneid4323

Maybe I should revise that to the 328 owners and the 335 in cali stuck with 91 octane.

91, 93 w/e that difference of 2 oct with a Tune would yield 5-8 HP Crank MAX...

[Artz 330]

Originally Posted by sflgator

Maybe off topic a bit, but Artz 330, I think you have a slow PROcede 335i. Did you dyno your car before/after PROcede install? According to other PROcede 335i accounts (including recorded runs), the Z4M just isn't as fast as a PROcede 335i; therefore, I really think your 335i might just be a bit slower than most others. If my car can pull on an E60 M5 from 0-80mph, then I'm pretty sure I can beta a Z4M as well through at least that speed, if not the 1/4 mi. and possibly beyond.

doubt it as a few of my friends drive 335i's some stock some with procede, and procede vs procede the cars are dead even. Which i dont think we all have bad procedes..

Btw. The car has a 4.4 second 0-60 verified by GPS. Which is right on for the M Coupe. Mine at least.

[sflgator]

Originally Posted by Artz 330

doubt it as a few of my friends drive 335i's some stock some with procede, and procede vs procede the cars are dead even. Which i dont think we all have bad procedes..

Btw. The car has a 4.4 second 0-60 verified by GPS. Which is right on for the M Coupe. Mine at least.

OR...maybe you just happen to have a very fast stock Z4M, especially since many Z4M's get 4.8sec. 0-60mph (which is on par with a stock 335i)????

[Dammmittt]

Originally Posted by Dammmittt

Here they are!!!

Someone had to give that pic some love might as well be me

[Artz 330]

Originally Posted by sflgator

OR...maybe you just happen to have a very fast stock Z4M, especially since many Z4M's get 4.8sec. 0-60mph (which is on par with a stock 335i)????

BMW says 4.9 which eveyone knows they under rate their cars.

[Dammmittt]

I dunno if Artz would say his Z4M is put together better than others, but it may have a strong engine.

OT. Artz, I checked out a 335i coupe in "my" color scheme, that thing looked hot for a run of the mill 335i. Nice choice man.

[sflgator]

Originally Posted by Artz 330

BMW says 4.9 which eveyone knows they under rate their cars.

Ok, so it runs like 4.6-4.7 sec. 0-60mph and 1/4 mi. in 13.0-13.2 sec. @ 105+mph (although slower according to the 3 Z4M times on dragtimes.com, but anyway)...does that sound about right?

And, a PROcede (v1.47) 335i runs 4.4-4.6sec. 0-60mph and anywhere from 12.5 - 13.0 sec. @ 106-111mph. What does this tell you?

[Artz 330]

Originally Posted by sflgator

Ok, so it runs like 4.6-4.7 sec. 0-60mph and 1/4 mi. in 13.0-13.2 sec. @ 105+mph (although slower according to the 3 Z4M times on dragtimes.com, but anyway)...does that sound about right?

And, a PROcede (v1.47) 335i runs 4.4-4.6sec. 0-60mph and anywhere from 12.5 - 13.0 sec. @ 106-111mph. What does this tell you?

stock i ran 12.9 @ 108 with a 2.0 60' whats that tell you.

I now have 47K miles on the car. Stripped off about 100 LBS off the car, H&R springs, and TMS Under drive pulleys. I am thinking maybe 12.7 at 110+ what do you think...

[Mattscott]

Originally Posted by Artz 330

stock i ran 12.9 @ 108 with a 2.0 60' whats that tell you.

I now have 47K miles on the car. Stripped off about 100 LBS off the car, H&R springs, and TMS Under drive pulleys. I am thinking maybe 12.7 at 110+ what do you think...

We're supposed to be here