BMW M3 Forum (E90 E92)

BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Go Back   M3Post - BMW M3 Forum > E90/E92 M3 Technical Topics > Track / Autocross / Dragstrip / Driving Techniques
 
European Auto Source
Post Reply
 
Thread Tools Search this Thread
      07-06-2013, 03:46 PM   #1
mid-corner fun
Major
 
Drives: e92
Join Date: Jun 2005
Location: NE

Posts: 1,385
iTrader: (3)

Very large toe change for small camber increase, now what?

Plan foiled! My intention was to setup 2 very different profiles on the Vorshlag camber plates, a very mild street profile at -1.5 to -1.7 with slight toe-in and a more aggressive track profile at -2.5 with slight toe-out (for starters, and increase camber to -3.x from there).

Well, at -1.6 and 1/16 toe-in, a -0.2 increase in camber results in a 1/8 increase in toe, pretty much maxes out my desired toe settings without even getting to -2 camber.

Yes, I know about the alignment settings thread in the suspension forum and the recent post on tie-rod adjustments, but if you go down that route how do you know what you're adjusting to? I posted here as I'm looking for specific track setting advice. This is on a "civic" EDC M3 with 18s, no other suspension changes.
Any ideas?
mid-corner fun is offline   United_States
0
Reply With Quote
      07-06-2013, 06:05 PM   #2
surlynkid
Captain
 
surlynkid's Avatar
 
Drives: 2013 E92 M3
Join Date: Apr 2012
Location: League City, TX

Posts: 865
iTrader: (1)

Garage List
set your street camber. mark where the pointer is. for me it is the second tick mark. set your street toe and mark the tie rod with ink to match rod end to threads. same kind of ink used to mark torqued bolts. then have alignment guy set camber to whatever you want. now have him adjust toe from each side individually and count how many wrench flats he rotates the tie rod adjustment to get the correct toe. for me, it is 2.5 wrench flats. I do that when I push the camber in and then undo it when I push the camber back. there is no easy way to escape this unless you pick a static camber which will either be too much for the street or not enough for the track. it is really easy to adjust toe as long as you know how far to go and where to return when you are done at the track. just a T50 socket to loosen it and a 13mm open end wrench to adjust it.
__________________
Stoptech 380mm/355mm | Pagid RS-29 | Akrapovic EVO - CF tips | Benvo Tune | MS UDP | AA air filter | Apex EC-7 18x10 square 275/35-18 NT01 | 90mm Turner Studs | GT4 Brake Cooling | GT4 Power Steering Cooling | Performance Steering Wheel | CF Mirror Caps | CF Spoiler | Varis System 1 Full CF Diffuser | Extended Paddle Shifters | Schroth Quick Fit | Vorshlag Camber Plates | AiM Solo DL

Last edited by surlynkid; 07-07-2013 at 02:24 PM.
surlynkid is offline  
0
Reply With Quote
      07-07-2013, 07:43 AM   #3
CanAutM3
Brigadier General
 
CanAutM3's Avatar
 
Drives: 2008 E92 M3 (2015 M4 on order)
Join Date: Jan 2012
Location: Montreal

Posts: 3,497
iTrader: (0)

Garage List
2008 BMW M3  [0.00]
2006 Audi S4  [0.00]
This is the primary reason I stick with the same camber setting for both street and track.
CanAutM3 is offline   Canada
0
Reply With Quote
      07-07-2013, 01:02 PM   #4
bigjae1976
Takes threads off topic...daily
 
bigjae1976's Avatar
 
Drives: 11 E90 M3 Individual
Join Date: Mar 2006
Location: Milwaukee, WI

Posts: 5,257
iTrader: (12)

Garage List
2004 BMW M3  [4.50]
2011 BMW E90 M3  [5.00]
2013 BMW 328i  [5.00]
I forget who it was but they only make the tie rod adjustment on one side when they go from street to track camber.

I mark the inner tie rod with white out. And then have my alignment shop align for the street, mark the outer tie rod. Then align for the track, mark the outer tie rod. Make sure you know which one is which and the right direction to turn the tie rod.

You have to jack up each corner for the track anyway...what's another 10 minutes to make a minor and easy toe adjustment.

BUT...I'm finding that -2.2 camber up front is the sweet spot with NT01s. Although I still think its closer to -2.5 but haven't had time or the car on the track to play with it.
__________________


Sponsored by Momentum BMW #593...We Bleed BMW BLUE!
bigjae1976 is offline  
0
Reply With Quote
      07-07-2013, 02:23 PM   #5
surlynkid
Captain
 
surlynkid's Avatar
 
Drives: 2013 E92 M3
Join Date: Apr 2012
Location: League City, TX

Posts: 865
iTrader: (1)

Garage List
[quote=bigjae1976;14282185]I forget who it was but they only make the tie rod adjustment on one side when they go from street to track camber.

QUOTE]

you can do that, but your steering wheel will not be straight in both cases. if you want it centered and level, you have to adjust from both sides. it is easier to do one side, but once lifted it is easy to do both.
__________________
Stoptech 380mm/355mm | Pagid RS-29 | Akrapovic EVO - CF tips | Benvo Tune | MS UDP | AA air filter | Apex EC-7 18x10 square 275/35-18 NT01 | 90mm Turner Studs | GT4 Brake Cooling | GT4 Power Steering Cooling | Performance Steering Wheel | CF Mirror Caps | CF Spoiler | Varis System 1 Full CF Diffuser | Extended Paddle Shifters | Schroth Quick Fit | Vorshlag Camber Plates | AiM Solo DL
surlynkid is offline  
0
Reply With Quote
      07-07-2013, 03:00 PM   #6
bigjae1976
Takes threads off topic...daily
 
bigjae1976's Avatar
 
Drives: 11 E90 M3 Individual
Join Date: Mar 2006
Location: Milwaukee, WI

Posts: 5,257
iTrader: (12)

Garage List
2004 BMW M3  [4.50]
2011 BMW E90 M3  [5.00]
2013 BMW 328i  [5.00]
I have my tie rods marked on both sides. It only takes about 1/8th of a turn.
__________________


Sponsored by Momentum BMW #593...We Bleed BMW BLUE!
bigjae1976 is offline  
0
Reply With Quote
      07-07-2013, 07:07 PM   #7
TXmtrhed
First Lieutenant
 
TXmtrhed's Avatar
 
Drives: VO 1M
Join Date: Aug 2010
Location: Katy, TX

Posts: 314
iTrader: (0)

[quote=surlynkid;14282497
you can do that, but your steering wheel will not be straight in both cases. if you want it centered and level, you have to adjust from both sides. it is easier to do one side, but once lifted it is easy to do both.[/QUOTE]

The steering wheel will not be off center by very much. Save time and adjust just one side.
__________________
TXmtrhed is offline  
0
Reply With Quote
      07-07-2013, 07:51 PM   #8
mid-corner fun
Major
 
Drives: e92
Join Date: Jun 2005
Location: NE

Posts: 1,385
iTrader: (3)

thanks guys, will mark the current tie-rod position and on the next alignment I'll mark a track setting too. For now I settled at -2.0 on all 4 corners which may not be bad with the Direzza IIs anyway. Hoping the splice issue goes away on the NT01s so I can go back to them later this year, with more neg camber.
mid-corner fun is offline   United_States
0
Reply With Quote
      07-07-2013, 08:03 PM   #9
surlynkid
Captain
 
surlynkid's Avatar
 
Drives: 2013 E92 M3
Join Date: Apr 2012
Location: League City, TX

Posts: 865
iTrader: (1)

Garage List
Quote:
Originally Posted by TXmtrhed View Post
The steering wheel will not be off center by very much. Save time and adjust just one side.
too anal retentive for that. that blue line on the performance steering wheel drives me nuts when it is off center.
__________________
Stoptech 380mm/355mm | Pagid RS-29 | Akrapovic EVO - CF tips | Benvo Tune | MS UDP | AA air filter | Apex EC-7 18x10 square 275/35-18 NT01 | 90mm Turner Studs | GT4 Brake Cooling | GT4 Power Steering Cooling | Performance Steering Wheel | CF Mirror Caps | CF Spoiler | Varis System 1 Full CF Diffuser | Extended Paddle Shifters | Schroth Quick Fit | Vorshlag Camber Plates | AiM Solo DL
surlynkid is offline  
0
Reply With Quote
      07-07-2013, 08:13 PM   #10
sensi09
Lieutenant Colonel
 
Drives: .
Join Date: Dec 2010
Location: socal

Posts: 1,762
iTrader: (1)

How about some toe plates.

Been reading up on DIY string alignments recently. Hope to take the time to learn to do so in the future.
sensi09 is offline  
0
Reply With Quote
      07-07-2013, 09:24 PM   #11
bigjae1976
Takes threads off topic...daily
 
bigjae1976's Avatar
 
Drives: 11 E90 M3 Individual
Join Date: Mar 2006
Location: Milwaukee, WI

Posts: 5,257
iTrader: (12)

Garage List
2004 BMW M3  [4.50]
2011 BMW E90 M3  [5.00]
2013 BMW 328i  [5.00]
Quote:
Originally Posted by mid-corner fun View Post
thanks guys, will mark the current tie-rod position and on the next alignment I'll mark a track setting too. For now I settled at -2.0 on all 4 corners which may not be bad with the Direzza IIs anyway. Hoping the splice issue goes away on the NT01s so I can go back to them later this year, with more neg camber.
My last 8 NT01s have not had the splice issue. I know of two others that have NT01s with no splices. I just got 3 free warrant replacements for spliced tires (4th tire was corded and spliced).

Likely a manufacturing defect that was fixed.
__________________


Sponsored by Momentum BMW #593...We Bleed BMW BLUE!
bigjae1976 is offline  
0
Reply With Quote
      07-07-2013, 09:26 PM   #12
bigjae1976
Takes threads off topic...daily
 
bigjae1976's Avatar
 
Drives: 11 E90 M3 Individual
Join Date: Mar 2006
Location: Milwaukee, WI

Posts: 5,257
iTrader: (12)

Garage List
2004 BMW M3  [4.50]
2011 BMW E90 M3  [5.00]
2013 BMW 328i  [5.00]
Quote:
Originally Posted by TXmtrhed View Post
The steering wheel will not be off center by very much. Save time and adjust just one side.
He has that fancy performance steering wheel with the stripe at the top. I'm sure it would drive surlynkid absolutely bonkers on the grid looking at his cock-eyed blue stripe on his steering wheel as his instructor keeps asking if his steering wheel is on crooked.
__________________


Sponsored by Momentum BMW #593...We Bleed BMW BLUE!
bigjae1976 is offline  
0
Reply With Quote
      07-08-2013, 03:15 AM   #13
Autobahn335i
Lieutenant Colonel
 
Autobahn335i's Avatar
 
Drives: E92 335i
Join Date: Mar 2009
Location: Luxembourg

Posts: 1,569
iTrader: (5)

Quote:
Originally Posted by surlynkid View Post
too anal retentive for that. that blue line on the performance steering wheel drives me nuts when it is off center.
Hehe main reason I don't have a Performance wheel (although the alcantara is soooo nice). But my alignment shop seems to NEVER get the steering wheel 100% straight. Would drive me mad
__________________
Performance Seats, Exhaust, Splitters, Pedals, Steering Wheel / RB Turbos / M3 CF Roof / Brembo GT BBK 355/345 / Rollcage / Forge FMIC / Quaife LSD / Bilstein PSS10 / M3 Suspension Parts / Powerflex Bushings / Vorshlag Camberplates / RE Toe Links / LeatherZ Gauges / Extended M3 DCT Paddles / ER Sports OC / AR OC / Aux Radiator / AR DPs / Alpina TCU Flash / COBB Pro-Tune
Autobahn335i is offline   Luxembourg
0
Reply With Quote
      07-08-2013, 06:38 AM   #14
surlynkid
Captain
 
surlynkid's Avatar
 
Drives: 2013 E92 M3
Join Date: Apr 2012
Location: League City, TX

Posts: 865
iTrader: (1)

Garage List
Quote:
Originally Posted by Autobahn335i View Post
Hehe main reason I don't have a Performance wheel (although the alcantara is soooo nice). But my alignment shop seems to NEVER get the steering wheel 100% straight. Would drive me mad
they don't get it right because it is too much work. the guy that does my alignments lets me sit in it the car and keep it straight and turn it back and forth while he adjusts things on the rack. also helps me get a better alignment as the weight of me in the car changes the camber/toe.
__________________
Stoptech 380mm/355mm | Pagid RS-29 | Akrapovic EVO - CF tips | Benvo Tune | MS UDP | AA air filter | Apex EC-7 18x10 square 275/35-18 NT01 | 90mm Turner Studs | GT4 Brake Cooling | GT4 Power Steering Cooling | Performance Steering Wheel | CF Mirror Caps | CF Spoiler | Varis System 1 Full CF Diffuser | Extended Paddle Shifters | Schroth Quick Fit | Vorshlag Camber Plates | AiM Solo DL
surlynkid is offline  
0
Reply With Quote
      07-08-2013, 09:40 AM   #15
Sleeper519
Captain
 
Sleeper519's Avatar
 
Drives: 08 E92 M3 DCT
Join Date: Nov 2009
Location: Atlanta, GA

Posts: 727
iTrader: (0)

Quote:
Originally Posted by surlynkid View Post
they don't get it right because it is too much work. the guy that does my alignments lets me sit in it the car and keep it straight and turn it back and forth while he adjusts things on the rack. also helps me get a better alignment as the weight of me in the car changes the camber/toe.
My guy lets me sit in the car too, love it. gets the steering wheel and weight just right while I shoot the shit with him!

Quote:
Originally Posted by mid-corner fun View Post
thanks guys, will mark the current tie-rod position and on the next alignment I'll mark a track setting too. For now I settled at -2.0 on all 4 corners which may not be bad with the Direzza IIs anyway. Hoping the splice issue goes away on the NT01s so I can go back to them later this year, with more neg camber.
I went thru all these shenanigans too. We decided on a static camber setting (-2.5F, -2.0R) for both street and track, but I still change the toe at trackside . Street setting is 1/16" IN for drivability, and track setting is 1/16" OUT for better turn in response. It's a simple 60 second change when I'm putting on the track wheels, and it truly doesn't change the steering wheel enough for me to even notice. So far my street tires are wearing evenly and the temps across the track tires are fairly uniform.
__________________

2008 M3 Coupe / DCT // StopTech BBK 380/355 / Pagid RS29 / Motul / Apex Arc-8 / BFG R1S / Ground Control / MS filter / Performance spoiler / BPM tune // Road Atlanta 1:39.80 / VIR Full 2:10.87 / Barber 1:42.20
Sleeper519 is offline   United_States
0
Reply With Quote
      07-08-2013, 10:26 AM   #16
lutfy
Second Lieutenant
 
lutfy's Avatar
 
Drives: 2009 E90 M3 DCT
Join Date: Mar 2012
Location: Washington DC

Posts: 201
iTrader: (1)

Quote:
Originally Posted by Sleeper519 View Post
I went thru all these shenanigans too. We decided on a static camber setting (-2.5F, -2.0R) for both street and track, but I still change the toe at trackside . Street setting is 1/16" IN for drivability, and track setting is 1/16" OUT for better turn in response. It's a simple 60 second change when I'm putting on the track wheels, and it truly doesn't change the steering wheel enough for me to even notice. So far my street tires are wearing evenly and the temps across the track tires are fairly uniform.
100% agreed. After playing with different settings, I am now running the same camber setting as Sleeper. I don't consider it a compromise. Street wear is fairly decent (running 0 toe up front). On the track, the wear is even. With -3 up front, I was actually burning up and wearing out the inside tires on the TRACK. Camber curves seem to be better compared to other M3 models. This is on a complete stock suspension BTW.

Regards,

Lutfy
lutfy is offline  
0
Reply With Quote
      07-08-2013, 10:43 AM   #17
TXmtrhed
First Lieutenant
 
TXmtrhed's Avatar
 
Drives: VO 1M
Join Date: Aug 2010
Location: Katy, TX

Posts: 314
iTrader: (0)

Quote:
Originally Posted by surlynkid View Post
too anal retentive for that. that blue line on the performance steering wheel drives me nuts when it is off center.
I'm too busy looking outside the car to look at the steering wheel when I'm on the track. If you had a decent instructor he would say the same.
Apologies (kinda) to bigjae.
__________________
TXmtrhed is offline  
0
Reply With Quote
      07-08-2013, 12:20 PM   #18
ortho281
Captain
 
ortho281's Avatar
 
Drives: 2011 E92 M3 6MT
Join Date: Aug 2010
Location: Katy, TX

Posts: 646
iTrader: (0)

I went with a static setting and have dialed it down to -2.4f/-1.8r with front toe set at 0.03 degrees per side. With this alignment, I get even wear on my NT01's rotated and decent wear on PSS as well.
__________________

Akra Evo / MS stage 2 / MS UDP / VF Tune / KW S/O springs / Vorshlag plates / ST 380/355 BBK / ST SR34 pads / Apex Arc-8 / Nitto NT01 / Cantrell Motorsports roll cage / Recaro Profi / Schroth Profi II-6 / BMW Performance Alcantera wheel
ortho281 is offline   United_States
0
Reply With Quote
      07-08-2013, 12:51 PM   #19
bigjae1976
Takes threads off topic...daily
 
bigjae1976's Avatar
 
Drives: 11 E90 M3 Individual
Join Date: Mar 2006
Location: Milwaukee, WI

Posts: 5,257
iTrader: (12)

Garage List
2004 BMW M3  [4.50]
2011 BMW E90 M3  [5.00]
2013 BMW 328i  [5.00]
Quote:
Originally Posted by TXmtrhed
Quote:
Originally Posted by surlynkid View Post
too anal retentive for that. that blue line on the performance steering wheel drives me nuts when it is off center.
I'm too busy looking outside the car to look at the steering wheel when I'm on the track. If you had a decent instructor he would say the same.
Apologies (kinda) to bigjae.
Paul, you're totally off on describing my style of instructing. Especially when Surlynkid is driving, it involves screaming, profanity, crying and even some thumb sucking.
__________________


Sponsored by Momentum BMW #593...We Bleed BMW BLUE!
bigjae1976 is offline  
0
Reply With Quote
      07-08-2013, 01:22 PM   #20
mid-corner fun
Major
 
Drives: e92
Join Date: Jun 2005
Location: NE

Posts: 1,385
iTrader: (3)

Quote:
Originally Posted by bigjae1976 View Post
Paul, you're totally off on describing my style of instructing. Especially when Surlynkid is driving, it involves screaming, profanity, crying and even some thumb sucking.
Driver or instructor? With proper alignment the driver should not be able to see the perf. wheel blue line while thumb sucking
mid-corner fun is offline   United_States
0
Reply With Quote
      07-08-2013, 03:19 PM   #21
LiM3y
Major
 
LiM3y's Avatar
 
Drives: 2008 E90 M3
Join Date: Jun 2009
Location: CT

Posts: 1,220
iTrader: (3)

Quote:
Originally Posted by mid-corner fun View Post
Driver or instructor? With proper alignment the driver should not be able to see the perf. wheel blue line while thumb sucking
Is it okay to suck the thumb of the instructor?

I always steered away from bringing this up, but this post makes me think I should ask in future. I think the emotional support will help my driving.

Von Zoom? Thoughts?
__________________
LiM3y is online now   United Kingdom
0
Reply With Quote
      07-08-2013, 09:25 PM   #22
bigjae1976
Takes threads off topic...daily
 
bigjae1976's Avatar
 
Drives: 11 E90 M3 Individual
Join Date: Mar 2006
Location: Milwaukee, WI

Posts: 5,257
iTrader: (12)

Garage List
2004 BMW M3  [4.50]
2011 BMW E90 M3  [5.00]
2013 BMW 328i  [5.00]
Quote:
Originally Posted by LiM3y View Post
Is it okay to suck the thumb of the instructor?

I always steered away from bringing this up, but this post makes me think I should ask in future. I think the emotional support will help my driving.

Von Zoom? Thoughts?
I encourage it. Especially after I come out of the port-o-potty and jump in the student's car.
__________________


Sponsored by Momentum BMW #593...We Bleed BMW BLUE!
bigjae1976 is offline  
0
Reply With Quote
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 08:47 PM.




m3post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST