BMW M3 Forum (E90 E92)

BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Go Back   M3Post - BMW M3 Forum > E90/E92 M3 Technical Topics > Wheels + Tires Sponsored by The Tire Rack
  TireRack

KEEP M3POST ALIVE BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER LINK!
Post Reply
 
Thread Tools Search this Thread
      03-21-2013, 01:50 PM   #1
MRSSIIM3
General
 
MRSSIIM3's Avatar
 
Drives: 2013 e92 M3
Join Date: Apr 2009
Location: SoCal

Posts: 1,257
iTrader: (5)

Need Tire Sizing Help on PSS with Spacers...Rub Question

I am looking to upgrade my stock PS2s on ZCP wheels to PSS.

I have 12mm and 15mm spacers on the car.

Can anyone tell me, without telling me to use the search feature, whether the following will rub both WITH and WITHOUT wheel spacers?

1. 265/35/19 and 285/35/19
2. 255/35/19 and 275/35/19

Does option 1 keep stock specs and will it result in DSC issues?
__________________
Current: 2015 M4, SSII / SO
Current: 2013 E92 M3, SSII, Black extended, ZCP, fully loaded
Mods: Black Hood Vents, Black Grilles, Black Side Grilles, Lux H8 v. 4.0, CF Mirrors, CF Spoiler, Black ///M Emblem, Evolve Tune, Dinan CF Intake, Dinan Pulley, Akrapovic GT4
Retired: 2011.5 E92 M3, SSII

Last edited by MRSSIIM3; 03-21-2013 at 02:13 PM.
MRSSIIM3 is offline   United_States
0
Reply With Quote
      03-21-2013, 02:23 PM   #2
dmk08
///Maniac
 
dmk08's Avatar
 
Drives: 2011 E92 M3
Join Date: Jul 2012
Location: Atlanta

Posts: 2,282
iTrader: (8)

Garage List
2011 BMW M3 E92  [0.00]
I ran option 2 with same spacers and no problem. Not sure about option 1.
dmk08 is offline  
0
Reply With Quote
      03-21-2013, 04:07 PM   #3
esquire
Colonel
 
esquire's Avatar
 
Drives: 2011.5 Dakar Yellow M3 Coupe
Join Date: Feb 2007
Location: Orange County, California

Posts: 2,800
iTrader: (0)

Are you on stock suspension?
__________________

[ESS VT2-625] [Akrapovic Evolution Exhaust] [KW Clubsports] [OSS Angel Eyes] [Revinora r-CRT Lip]
[Vorsteiner Boot] [Challenge Race Diffuser] [See the Build Thread HERE]
esquire is offline   United_States
0
Reply With Quote
      03-21-2013, 04:18 PM   #4
Longboarder
Brigadier General
 
Drives: 2013 e92 M3
Join Date: Dec 2006
Location: Monarch Beach

Posts: 3,652
iTrader: (1)

Garage List
2011 997.2 Turbo S  [4.83]
2013 e92 M3  [4.55]
2013 WRX STi  [4.00]
2013 BMW X5  [0.00]
Ohhh good post.

I have 255/35/19 and 275/35/19 PSS on a 2013 stock zcp suspension but I'm installing 12/15mm MS spacer Monday together with camber plates...so the additional neg camber may be what prevents rubbing. I will ask Malek @ MRF as he has tested all these combos with the ZCP wheels + spacers + tire sizes.
__________________
Daily: 2013 e92 M3 DCT / ESS VT2 650 S/C / Akrapovic Evolution / StopTech BBK
Track/Airstrip: 2011 997.2 Turbo S PDK / 725 HP / BBi suspension build
Beater: 2013 X5 3.5sport
YouTube Channel: https://www.youtube.com/channel/UCT1...eoFBszPIK0gf9w
Longboarder is offline  
0
Reply With Quote
      03-21-2013, 05:55 PM   #5
MRSSIIM3
General
 
MRSSIIM3's Avatar
 
Drives: 2013 e92 M3
Join Date: Apr 2009
Location: SoCal

Posts: 1,257
iTrader: (5)

Quote:
Originally Posted by esquire View Post
Are you on stock suspension?
suspension is stock, but i have comp package
__________________
Current: 2015 M4, SSII / SO
Current: 2013 E92 M3, SSII, Black extended, ZCP, fully loaded
Mods: Black Hood Vents, Black Grilles, Black Side Grilles, Lux H8 v. 4.0, CF Mirrors, CF Spoiler, Black ///M Emblem, Evolve Tune, Dinan CF Intake, Dinan Pulley, Akrapovic GT4
Retired: 2011.5 E92 M3, SSII
MRSSIIM3 is offline   United_States
0
Reply With Quote
      03-21-2013, 06:28 PM   #6
Transfer
Lieutenant Colonel
 
Transfer's Avatar
 
Drives: SQ5, X1
Join Date: Mar 2010
Location: Seattle, WA

Posts: 1,673
iTrader: (0)

I have PSS 255 front and 275 rear on an otherwise stock ZCP car and there's some room but I think it would be close with those spacers and 265/285. 255/275 should work fine.
Transfer is offline   United_States
0
Reply With Quote
      03-21-2013, 06:39 PM   #7
LarThaL
Colonel
 
LarThaL's Avatar
 
Drives: 2011 M3
Join Date: Apr 2011
Location: West Springfield, MA

Posts: 2,555
iTrader: (0)

Quote:
Originally Posted by MRSSIIM3 View Post
I am looking to upgrade my stock PS2s on ZCP wheels to PSS.

I have 12mm and 15mm spacers on the car.

Can anyone tell me, without telling me to use the search feature, whether the following will rub both WITH and WITHOUT wheel spacers?

1. 265/35/19 and 285/35/19
2. 255/35/19 and 275/35/19

Does option 1 keep stock specs and will it result in DSC issues?
#1 will be way off in sizing and will certainly rub. You want 265/30/19 and 285/30/19. These will not rub when used with ZCP wheels and no spacers.

#2 will probably rub with a 15mm front spacer. Even with 245 PSS and 12.5mm spacers, I have only a few mm of clearance from the fender liner on full turn.
__________________
Precision tool: 2011 BMW ///M3
Sledgehammer: 2014 Audi S6

LarThaL is offline  
0
Reply With Quote
      03-21-2013, 06:52 PM   #8
CanAutM3
Brigadier General
 
CanAutM3's Avatar
 
Drives: 2015 M4 DCT
Join Date: Jan 2012
Location: Montreal

Posts: 3,721
iTrader: (0)

Garage List
2015 BMW M4  [4.50]
2006 Audi S4  [0.00]
I am running 12mm spacers up front with 255/35 PSS on 220M wheels. I am getting slight rub on patial lock on the fender liner. So 15mm with either the 255/35 or 265/35 will most likely rub, especially with ZCP wheels.

275/35 PSS with 5mm spacers in back with no rub. But it is tight.

Stock civic suspension with EDC.
CanAutM3 is online now   Canada
0
Reply With Quote
      03-21-2013, 07:41 PM   #9
Denk
Lieutenant Colonel
 
Drives: E92 M3 ZCP
Join Date: May 2011
Location: PNW

Posts: 1,874
iTrader: (2)

Forget option 1, wrong sizes. Option 2 or GTS sizes w/o spacers is my recommendation for a no rub solution...actually, you may still rub slightly with a 255/35-19 up front on full lock. If you gotta do the bulldog stance, keep stock size tires w/spacers.
Denk is offline   United_States
0
Reply With Quote
      03-21-2013, 08:23 PM   #10
llis
octane chick
 
llis's Avatar
 
Drives: Ms
Join Date: Oct 2010
Location: Colorado

Posts: 1,133
iTrader: (1)

Garage List
2003 BMW M5  [0.00]
2002 BMW 530i (fs)  [0.00]
2013 BMW M3  [5.00]
255/35R19 PSSs on front 359s w ZCP stock suspension: I had no rub without spacers, and a very slight left-front fender liner rub with 12.5mm spacers at half-turn. Full neg camber with pins pulled. I did not have this problem with AD08s same size no spacers w camber plates on my previous car.

275/35R19 PSSs on rear 359s w ZCP stock suspension: Slight fender liner rub on even medium dips. With 12.5mm spacers, I was getting slight fender rub on outer edge. You could see the mild scrapes. A bit of neg camber adjustment and all gone.

Altogether I love how the wheels fill the wells now!

Hope this helps!
__________________

2013 E92 ///M3 ZCP 6MT Speed Yellow 2003 E39 ///M5
llis is offline   United_States
0
Reply With Quote
      03-22-2013, 10:56 AM   #11
chris3g
Private First Class
 
Drives: 2012 E92 M3
Join Date: Jan 2012
Location: NJ

Posts: 189
iTrader: (3)

I can't decide between 255/35 275/35 and 265/30 295/30 on zcp wheels. I feel like the first option is slightly better for keeping with factory parameters, but on the other hand the 295 rear should provide some extra grip, which I will definitely be able to use with the Ess 625 kit.

I guess the 285/30/19 PSS isn't happening this year?
chris3g is offline  
0
Reply With Quote
      03-22-2013, 11:00 AM   #12
MRSSIIM3
General
 
MRSSIIM3's Avatar
 
Drives: 2013 e92 M3
Join Date: Apr 2009
Location: SoCal

Posts: 1,257
iTrader: (5)

Thank you for the help everyone! I ended up going with 255/35/19 and 275/35/19 combo. Regarding the rub issue with spacers, I'll have the tire place keep the spacers on for me and I'll turn the wheel all the way to see if it rubs. If so, I'll take out the spacers
__________________
Current: 2015 M4, SSII / SO
Current: 2013 E92 M3, SSII, Black extended, ZCP, fully loaded
Mods: Black Hood Vents, Black Grilles, Black Side Grilles, Lux H8 v. 4.0, CF Mirrors, CF Spoiler, Black ///M Emblem, Evolve Tune, Dinan CF Intake, Dinan Pulley, Akrapovic GT4
Retired: 2011.5 E92 M3, SSII
MRSSIIM3 is offline   United_States
0
Reply With Quote
      03-26-2013, 01:19 PM   #13
DopeM3
M Power
 
DopeM3's Avatar
 
Drives: M3
Join Date: Jun 2012
Location: NH

Posts: 1,295
iTrader: (8)

Quote:
Originally Posted by MRSSIIM3 View Post
Thank you for the help everyone! I ended up going with 255/35/19 and 275/35/19 combo. Regarding the rub issue with spacers, I'll have the tire place keep the spacers on for me and I'll turn the wheel all the way to see if it rubs. If so, I'll take out the spacers
That a boy
DopeM3 is offline   United_States
0
Reply With Quote
      04-03-2013, 04:07 AM   #14
manari06
Captain
 
manari06's Avatar
 
Drives: 2013 E92 M3 Mineral White
Join Date: Jan 2010
Location: Illesheim, Germany

Posts: 994
iTrader: (6)

Garage List
2013 BMW M3 E92  [4.75]
2007 335I Coupe  [5.00]
I just ordered 265/35/19 VMR 710 ET22 Front and 295/30/19 ET25 Rear all on PSS! ZCP with EDC!!! Guess I'll find out soon if it rub!!!
__________________
I Am The Strength Behind The Fight!
manari06 is offline   Germany
0
Reply With Quote
      04-03-2013, 05:57 AM   #15
Stronghammer
Lieutenant
 
Stronghammer's Avatar
 
Drives: E92 M3
Join Date: May 2011
Location: south carolina

Posts: 580
iTrader: (2)

Quote:
Originally Posted by chris3g View Post
I can't decide between 255/35 275/35 and 265/30 295/30 on zcp wheels. I feel like the first option is slightly better for keeping with factory parameters, but on the other hand the 295 rear should provide some extra grip, which I will definitely be able to use with the Ess 625 kit.

I guess the 285/30/19 PSS isn't happening this year?
I am thinking of combining your set ups, that is 255/35/19 F and 295/30/19 R. My problem with 265/30/19 F is that the OD will be 25.3" vs. 26" with 255/35/19. A 0.7" increase in fender gap in the front. Thus more drop needed to maintain current stance. I also find it interesting that longboarder with his supercharger and runway events is only running 275's in back. So I wonder if the grip improvement gained in going from 275 to 295 will even be noticeable by someone such as myself.
__________________
2011 E92 M3 MR July 11 ED Sept 11 PCD
Mods: ESS VT1, MS test pipes, 19 BBS CH-R, Eibach pro springs, Painted reflectors, carbon fiber grills, Painted side markers with dark tinted lenses, 30% tint, Arkym rear diffuser, Innotech axle back exhaust, Performance spoiler
Stronghammer is offline  
0
Reply With Quote
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 03:00 PM.




m3post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST