BMW M3 Forum (E90 E92)

BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Go Back   M3Post - BMW M3 Forum > E90/E92 M3 Technical Topics > Engine, Transmission, Exhaust, Drivetrain, ECU Software Modifications
 
GetBMWParts
Post Reply
 
Thread Tools Search this Thread
      02-25-2013, 10:53 AM   #177
pbonsalb
Lieutenant Colonel
21

 
Drives: 08 E90 M3, 99 E36 M3 Turbo
Join Date: Feb 2011
Location: Concord, NH


Posts: 1,717
iTrader: (3)

No promises, but once it is adjusted properly, there should be no 02 codes with cat delete.
Appreciate 0
      05-30-2013, 09:29 AM   #178
coogs08
Second Lieutenant
9

 
Drives: 2009 M3
Join Date: Aug 2011
Location: Pearland, TX


Posts: 262
iTrader: (2)

I installed test pipes a couple months ago and planned on getting a tune, however I had to put it on hold. The CEL was beginning to bother me so I found a BMS DP fix in the FS forum and installed it. Used the app called 'Torque' along with an OBD BT adapter to clear the codes and get readiness info. I am very pleased with this product, see the screenshot I took below:

Appreciate 0
      05-30-2013, 01:14 PM   #179
dngo
Private
1

 
Drives: '98 M3/4, '08 E90M3
Join Date: Mar 2009
Location: Shrewsbury, NJ


Posts: 99
iTrader: (1)

Unfortunately these have been discontinued by BMS for the S65.

Dave
Appreciate 0
      05-30-2013, 01:16 PM   #180
scalbert
Major General
105

 
scalbert's Avatar
 
Drives: '08 E90 M3, '13 Volt, '08 Ody
Join Date: Feb 2007
Location: Woodstock, GA


Posts: 5,710
iTrader: (7)

I have one that I haven't used and will most likely get a tune. It may be up for sale soon.
Appreciate 0
      05-30-2013, 01:21 PM   #181
Mike Benvo
BimmerPost Supporting Vendor
United_States
129


 
Mike Benvo's Avatar
 
Drives: Harrop SC M3 / E46 M3 / 7Turbo
Join Date: Apr 2008
Location: SoCal


Posts: 4,744
iTrader: (7)

Garage List
2008 BMW M3  [5.00]
1990 BMW 735i Turbo  [5.00]
2004 BMW M3  [0.00]
Send a message via Skype™ to Mike Benvo
Tune is the proper way to go. Remember that the post o2 sensors do perform a very small amount of correction, especially for catalyst aging.

But in terms of a bandaid, this is a good move, or the Akra Delete-R.
__________________

-----| Like us on Facebook | Instagram || Tuning Information | Remote Coding |-----
----Visit us at www.BPMSport.com - Emotion. Driven. | Toll Free: (888) 557-5133----
Appreciate 0
      05-30-2013, 01:36 PM   #182
coogs08
Second Lieutenant
9

 
Drives: 2009 M3
Join Date: Aug 2011
Location: Pearland, TX


Posts: 262
iTrader: (2)

Quote:
Originally Posted by Mike Benvo View Post
Tune is the proper way to go. Remember that the post o2 sensors do perform a very small amount of correction, especially for catalyst aging.

But in terms of a bandaid, this is a good move, or the Akra Delete-R.
Of course, plus the many added benefits of a tune. I will have you tune my car one day, soon hopefully Mike!
Appreciate 0
      05-30-2013, 01:54 PM   #183
dngo
Private
1

 
Drives: '98 M3/4, '08 E90M3
Join Date: Mar 2009
Location: Shrewsbury, NJ


Posts: 99
iTrader: (1)

Quote:
Originally Posted by Mike Benvo View Post
Tune is the proper way to go. Remember that the post o2 sensors do perform a very small amount of correction, especially for catalyst aging.

But in terms of a bandaid, this is a good move, or the Akra Delete-R.
Mike,

I am all about getting a tune if/when I get a set of test pipes. However, the readiness check is obviously of concern for state inspection purposes. Is that something a tune can handle as well? I was under the impression that it wasn't, but I may have missed something.

If not, can a tune and something like this be used together?

Thanks,
Dave
Appreciate 0
      02-09-2014, 08:24 PM   #184
jdamore
Private First Class
3

 
jdamore's Avatar
 
Drives: 2008 e92 M3
Join Date: May 2013
Location: New Jersey


Posts: 122
iTrader: (4)

Quote:
Originally Posted by coogs08 View Post
I installed test pipes a couple months ago and planned on getting a tune, however I had to put it on hold. The CEL was beginning to bother me so I found a BMS DP fix in the FS forum and installed it. Used the app called 'Torque' along with an OBD BT adapter to clear the codes and get readiness info. I am very pleased with this product, see the screenshot I took below:

Bumping an old thread with a new solution..

I integrated an AndroidPC into my OEM nav and Torque alone is my solution. Torque has the option to periodically scan (in the background) for Fault codes and automatically clear them. Any cleared Faults can be reviewed in the log manager.

15$ for an OBDII Bluetooth adapter and 5$ for Torque. If you're using Torque on your cell phone, get yourself an app called Tasker. Create a profile in Tasker to start Torque when your phone connects to the Bluetooth in the car. Sorry for such a nerdy post but my point is you can eliminate the CEL for 20$ using nearly the same method as the delete-r

I tried the BMS dpfix but it did not work.

Last edited by jdamore; 02-09-2014 at 08:28 PM. Reason: Typo
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 12:32 AM.




m3post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST