Cf splitters

tee_733 · 01-30-2013, 01:45 AM

Going to install cf OEM BMW splitters , should I use betalink or 3m tape?

Boostin335 · 01-30-2013, 09:28 AM

Isn't there a screw that should be used?

THE TECH · 01-30-2013, 09:31 AM

Quote:

Originally Posted by Boostin335

Isn't there a screw that should be used?

Only one screw is used unless you drill the bumper for the second one.

OP, just use 3M tape.

M3forMe · 01-30-2013, 09:49 AM

Quote:

Originally Posted by THE TECH

Only one screw is used unless you drill the bumper for the second one.

OP, just use 3M tape.

+1. 3m and the one screw hole that is already drilled. No need to add the extra holes in your car. I had had mine on for quite some time and unfortunately put them through their paces with no issues at all.

ortho281 · 01-30-2013, 09:56 AM

I drilled the extra hole and used 3M tape on upper edge. I watched this DIY on how to install.

jjw2331 · 01-30-2013, 11:46 AM

Quote:

Originally Posted by THE TECH

Only one screw is used unless you drill the bumper for the second one.

OP, just use 3M tape.

+1 3M tape works very well. Betalink is somewhat permanent. So if you use betalink and hit something on the road, breaking one/both of your splitters, or even change your mind about them, you'll wish you used 3M tape.

tee_733 · 01-30-2013, 12:23 PM

Quote:

Originally Posted by jjw2331

Quote:

Originally Posted by THE TECH

Only one screw is used unless you drill the bumper for the second one.

OP, just use 3M tape.

+1 3M tape works very well. Betalink is somewhat permanent. So if you use betalink and hit something on the road, breaking one/both of your splitters, or even change your mind about them, you'll wish you used 3M tape.

Exactly what I was thinking, if i damaged one id want tone able to slip it off without damaging my bumper. Thanks for the input . Does it sit loose with 3m? Any play ?

Moxie · 01-30-2013, 12:27 PM

Quote:

Originally Posted by tee_733

Exactly what I was thinking, if i damaged one id want tone able to slip it off without damaging my bumper. Thanks for the input . Does it sit loose with 3m? Any play ?

No play - Sits tight

maxenar · 02-13-2013, 08:08 PM

Try to find 3M outdoor grade double sided tape. And yes, there should be two screws on each side IIRC...

Nordstat · 02-14-2013, 01:19 AM

When I banged up my first set of OEM-reps and replaced them, the 3M tape took off some of the paint from the bumper! Yea, I think 3M tape will hold the 4 oz (or whatever it is) splitter just fine!

...and yes, I repaired the paint chip before replacing.

01-30-2013, 01:45 AM	#1
tee_733 New Member Drives: E92 BMW M3 COUPE Join Date: Aug 2012 Location: Los Angeles Posts: 13 iTrader: (0)	Cf splitters Going to install cf OEM BMW splitters , should I use betalink or 3m tape?
	Tweet

01-30-2013, 09:56 AM	#5
ortho281 Captain Drives: 2011 E92 M3 6MT Join Date: Aug 2010 Location: Katy, TX Posts: 609 iTrader: (0)	I drilled the extra hole and used 3M tape on upper edge. I watched this DIY on how to install. __________________ Akra Evo / MS stage 2 / MS UDP / VF Tune / KW S/O springs / Vorshlag plates / ST 380/355 BBK / ST SR34 pads / Apex Arc-8 / Nitto NT01 / Schroth Rallye 3

02-14-2013, 01:19 AM	#10
Nordstat Second Lieutenant Drives: e90 M3 DCT Join Date: Dec 2012 Location: Los Angeles Posts: 231 iTrader: (0)	When I banged up my first set of OEM-reps and replaced them, the 3M tape took off some of the paint from the bumper! Yea, I think 3M tape will hold the 4 oz (or whatever it is) splitter just fine! ...and yes, I repaired the paint chip before replacing. __________________ 2010 e90 M3 =

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

01-30-2013, 09:28 AM	#2
Boostin335 Major Drives: sl600 z06 supra sti 996tt m3 Join Date: Sep 2007 Location: North/Central NJ Posts: 1,189 iTrader: (2)	Isn't there a screw that should be used?

02-13-2013, 08:08 PM	#9
maxenar Enlisted Member Drives: ESS VT2-650 M3 Join Date: Feb 2013 Location: Dallas, TX Posts: 32 iTrader: (0)	Try to find 3M outdoor grade double sided tape. And yes, there should be two screws on each side IIRC...