BMW M3 Forum (E90 E92)

BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Go Back   M3Post - BMW M3 Forum > E90/E92 M3 Technical Topics > Suspension | Brakes | Chassis
 
Post Reply
 
Thread Tools Search this Thread
      02-08-2013, 08:29 AM   #1
dmw16
Captain
18
Rep
931
Posts

 
Drives: 2005 ///M3
Join Date: Aug 2010
Location: Maryland

iTrader: (1)

Hypercoil or Swift Springs w/o Coilovers

Currently on my E46 M3 I have Billstein HD shocks and Eibach springs. I bought the setup upon discovery that my factory rear spring had broken and at the time hadn't really thought about track-duty.

I am now getting my car ready for track-duty as a more primary focus (it's not my DD) and I'm wondering if I'd do well to upgrade/change-out the Eibach springs with a set of linear springs like Hypercoil or Swift?

If so, how do I go about selecting spring rates, length, etc?

Thanks.
Appreciate 0
      02-08-2013, 07:54 PM   #2
M3SQRD
Colonel
M3SQRD's Avatar
United_States
24
Rep
2,480
Posts

 
Drives: E92 M3s,R56 CooperS,F22 228iX
Join Date: Jun 2009
Location: EC

iTrader: (2)

To make sure I understand what you'd like to do...you want to keep your stock dampers, and switch to constant-dia linear race springs on the front struts (as well as replace the stock rear springs)? If this is what you are trying to do then...

GC, TCK, Dinan...make sleeve-over kits for the stock dampers (EDC only?). The GC and TCK (not sure about Dinan) kits also come with front camber plates. They all come with rear height adjustable spring mounts. Finally, GC and TCK offer a limited range of spring rates that are suitable for the stock dampers.

If track duty is the "primary focus", why not switch to an aftermarket suspension setup? JRZ, MCS, TCK, Ohlins...all make suspension setups for the e9x M3 and will perform much better on the track than a sleeve-over kit as well as provide a much better street ride!
Appreciate 0
      02-08-2013, 08:54 PM   #3
dmw16
Captain
18
Rep
931
Posts

 
Drives: 2005 ///M3
Join Date: Aug 2010
Location: Maryland

iTrader: (1)

Quote:
Originally Posted by M3SQRD
To make sure I understand what you'd like to do...you want to keep your stock dampers, and switch to constant-dia linear race springs on the front struts (as well as replace the stock rear springs)? If this is what you are trying to do then...

GC, TCK, Dinan...make sleeve-over kits for the stock dampers (EDC only?). The GC and TCK (not sure about Dinan) kits also come with front camber plates. They all come with rear height adjustable spring mounts. Finally, GC and TCK offer a limited range of spring rates that are suitable for the stock dampers.

If track duty is the "primary focus", why not switch to an aftermarket suspension setup? JRZ, MCS, TCK, Ohlins...all make suspension setups for the e9x M3 and will perform much better on the track than a sleeve-over kit as well as provide a much better street ride!
Thanks. You understood what I thought I wanted to do correctly

I'm going to drive the car as-is for at least a season before upgrading the suspension and at that point I'll just get a proper coilover setup.
Appreciate 0
      02-08-2013, 09:27 PM   #4
Vic311
Banned
United_States
17
Rep
1,469
Posts

 
Drives: 2011 e92 M3
Join Date: Dec 2012
Location: NY

iTrader: (0)

Quote:
Originally Posted by dmw16 View Post
Currently on my E46 M3 I have Billstein HD shocks and Eibach springs. I bought the setup upon discovery that my factory rear spring had broken and at the time hadn't really thought about track-duty.

I am now getting my car ready for track-duty as a more primary focus (it's not my DD) and I'm wondering if I'd do well to upgrade/change-out the Eibach springs with a set of linear springs like Hypercoil or Swift?

If so, how do I go about selecting spring rates, length, etc?

Thanks.
You should contact Harold at hpashop.com..He's very knowledgeable on suspension tuning for BMWs.

He's also a vendor here on the forum

http://www.m3post.com/forums/member.php?u=20060
Appreciate 0
      02-08-2013, 10:40 PM   #5
M3SQRD
Colonel
M3SQRD's Avatar
United_States
24
Rep
2,480
Posts

 
Drives: E92 M3s,R56 CooperS,F22 228iX
Join Date: Jun 2009
Location: EC

iTrader: (2)

Quote:
Originally Posted by dmw16 View Post
Thanks. You understood what I thought I wanted to do correctly

I'm going to drive the car as-is for at least a season before upgrading the suspension and at that point I'll just get a proper coilover setup.


Depending on where you're located in MD, if you are interested, once things warm up I can take you for a ride in my e92 M3 with a JRZ RS1 setup (500/800 lbf/in spring rates)...
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 02:21 AM.




m3post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST