Arkym delays on ESS Plenums? NO ETA after over a month

Jbook · 01-10-2013, 12:13 PM

So I ordered my ESS supercharger with the Arkym CF plenum over a month ago (originally told there would be a lead time of 3 weeks). I went through vendors which are both on this forum which I have had very positive experiences with in the past. I'm not going to name names becaues I don't blame them AT ALL for what is occurring.

I have been trying to get some sort of ETA on the kits arrival for the past couple of weeks and neither has been able to give me anything. Apparently the hold up is with Arkym on the CF plenum. They have not been able to get in touch with Arkym to figure out what the deal is hence them not being able to give me an ETA.

Obviously I'm pretty upset about it since I've been out 5 digits for over a month and I can't even figure out when my kit will arrive (was supposed to be my Christmas gift to myself

). Has anyone had this sort of experience with Arkym? If you have the CF plenum how long did it take for yours to arrive?

I'm considering cancelling my order and just going with some sort of painted finish, but I am also thinking I should just be patient since I've already waited this long.

THE TECH · 01-10-2013, 12:19 PM

Quote:

Originally Posted by Jbook

So I ordered my ESS supercharger with the Arkym CF plenum over a month ago (originally told there would be a lead time of 3 weeks). I went through vendors which are both on this forum which I have had very positive experiences with in the past. I'm not going to name names becaues I don't blame them AT ALL for what is occurring.

I have been trying to get some sort of ETA on the kits arrival for the past couple of weeks and neither has been able to give me anything. Apparently the hold up is with Arkym on the CF plenum. They have not been able to get in touch with Arkym to figure out what the deal is hence them not being able to give me an ETA.

Obviously I'm pretty upset about it since I've been out 5 digits for over a month and I can't even figure out when my kit will arrive (was supposed to be my Christmas gift to myself

). Has anyone had this sort of experience with Arkym? If you have the CF plenum how long did it take for yours to arrive?

I'm considering cancelling my order and just going with some sort of painted finish, but I am also thinking I should just be patient since I've already waited this long.

Search Arkym and you'll get an idea.

maaicher · 01-10-2013, 12:39 PM

If you ordered through pyspeed that is the same thing as ordering through arkym.

Jbook · 01-10-2013, 12:45 PM

Quote:

Originally Posted by maaicher

If you ordered through pyspeed that is the same thing as ordering through arkym.

I did not order through PYSpeed after what I've heard about them on this forum. If they're the same thing as Arkym, they're local... I've read bad things about Arkym, but figured that since I ordered through reputable vendors it would be fine. I also figured that if ESS would offer that option, they would have some sort of close working relationship with them on these parts.

Roman@ESS · 01-10-2013, 12:48 PM

Quote:

Originally Posted by Jbook

So I ordered my ESS supercharger with the Arkym CF plenum over a month ago (originally told there would be a lead time of 3 weeks). I went through vendors which are both on this forum which I have had very positive experiences with in the past. I'm not going to name names becaues I don't blame them AT ALL for what is occurring.

I have been trying to get some sort of ETA on the kits arrival for the past couple of weeks and neither has been able to give me anything. Apparently the hold up is with Arkym on the CF plenum. They have not been able to get in touch with Arkym to figure out what the deal is hence them not being able to give me an ETA.

Obviously I'm pretty upset about it since I've been out 5 digits for over a month and I can't even figure out when my kit will arrive (was supposed to be my Christmas gift to myself

). Has anyone had this sort of experience with Arkym? If you have the CF plenum how long did it take for yours to arrive?

I'm considering cancelling my order and just going with some sort of painted finish, but I am also thinking I should just be patient since I've already waited this long.

Typical turn around on CF manifolds from Arkym has been about 3 weeks. Due to the holiday Arkym was closed for a couple weeks I believe which has caused a delay on holiday orders. We have only one manifold out to them at this time which we expect to ship back to us next week. Im going to guess this is yours. If it is you can email or PM me direct for updates and I will pass them along as I get them.

Jbook · 01-10-2013, 12:53 PM

Quote:

Originally Posted by Roman@ESS

Typical turn around on CF manifolds from Arkym has been about 3 weeks. Due to the holiday Arkym was closed for a couple weeks I believe which has caused a delay on holiday orders. We have only one manifold out to them at this time which we expect to ship back to us next week. Im going to guess this is yours. If it is you can email or PM me direct for updates and I will pass them along as I get them.

Thanks for the quick update Roman! The only thing that has been bothering me is the fact that I haven't been able to get an update like the one you just gave me. Hopefully I'll be able to get another one next week.

Roman@ESS · 01-10-2013, 12:57 PM

Quote:

Originally Posted by Jbook

Thanks for the quick update Roman! The only thing that has been bothering me is the fact that I haven't been able to get an update like the one you just gave me. Hopefully I'll be able to get another one next week.

No problem, I oversee all orders so if there is ever a question just check with me direct anytime.

Mr.MichaelM3 · 01-15-2013, 02:42 PM

Quote:

Originally Posted by THE TECH

Search Arkym and you'll get an idea.

+1

Endless619 · 01-21-2013, 10:32 PM

Quote:

Originally Posted by Jbook

So I ordered my ESS supercharger with the Arkym CF plenum over a month ago (originally told there would be a lead time of 3 weeks). I went through vendors which are both on this forum which I have had very positive experiences with in the past. I'm not going to name names becaues I don't blame them AT ALL for what is occurring.

I have been trying to get some sort of ETA on the kits arrival for the past couple of weeks and neither has been able to give me anything. Apparently the hold up is with Arkym on the CF plenum. They have not been able to get in touch with Arkym to figure out what the deal is hence them not being able to give me an ETA.

Obviously I'm pretty upset about it since I've been out 5 digits for over a month and I can't even figure out when my kit will arrive (was supposed to be my Christmas gift to myself

). Has anyone had this sort of experience with Arkym? If you have the CF plenum how long did it take for yours to arrive?

I'm considering cancelling my order and just going with some sort of painted finish, but I am also thinking I should just be patient since I've already waited this long.

That blows. Hopefully since you are out 5 digits you have another nice car/suv/truck you can drive for a couple more weeks till it arrives. Thats what I do.

Jbook · 01-21-2013, 11:45 PM

Quote:

Originally Posted by Endless619

That blows. Hopefully since you are out 5 digits you have another nice car/suv/truck you can drive for a couple more weeks till it arrives. Thats what I do.

Well I'm out 5 digits and I do have another car I could drive, but my car is still functional (just not supercharged

)

Jbook · 01-28-2013, 08:38 PM

Thank you Roman!! I received the kit today and I can't wait to get it on. The CF plenum really is a thing of beauty and worth the wait.

Roman@ESS · 01-29-2013, 12:13 PM

Quote:

Originally Posted by Jbook

Thank you Roman!! I received the kit today and I can't wait to get it on. The CF plenum really is a thing of beauty and worth the wait.

哇靠~M3 · 01-29-2013, 12:15 PM

GOLFFRR · 01-29-2013, 12:41 PM

Quote:

Originally Posted by Jbook

Thank you Roman!! I received the kit today and I can't wait to get it on. The CF plenum really is a thing of beauty and worth the wait.

nice!! congrats now get that thing installed so we can check it out!

Jbook · 01-29-2013, 03:22 PM

Quote:

Originally Posted by 哇靠~M3

Quote:

Originally Posted by GOLFFRR

nice!! congrats now get that thing installed so we can check it out!

Dropping the car off tomorrow morning! Also replaced my Dinan exhaust with a Akra slip-on and added Dinan CF struts and sway bar. Haven't posted pics with my new wheels either. My Stack gauges didn't come in even though those could have been shipped when I placed the order, but I'll live.

alynM3 · 01-29-2013, 04:30 PM

QUOTE=Jbook;13392546]

Dropping the car off tomorrow morning! Also replaced my Dinan exhaust with a Akra slip-on and added Dinan CF struts and sway bar. Haven't posted pics with my new wheels either. My Stack gauges didn't come in even though those could have been shipped when I placed the order, but I'll live.

[/quote]

I always told myself I would drop the extra $1500 for the CF manifold if/when I did it. Looks like there are finger prints all over the place... lol somebody has been caressing this thing.

Jbook · 01-29-2013, 04:40 PM

Quote:

Originally Posted by alynM3

I always told myself I would drop the extra $1500 for the CF manifold if/when I did it. Looks like there are finger prints all over the place... lol somebody has been caressing this thing.

Couldn't help myself

HoodR$CH · 02-01-2013, 11:18 AM

Quote:

Originally Posted by Jbook

Quote:

Originally Posted by alynM3

I always told myself I would drop the extra $1500 for the CF manifold if/when I did it. Looks like there are finger prints all over the place... lol somebody has been caressing this thing.

Couldn't help myself

That looks sick, do yourself a favor and have it re-clear coated if its made by Arkym. Won't cost you much.

THE TECH · 02-01-2013, 11:22 AM

Is the piece a full CF part or is it just overlayed with carbon?

It definitely looks like it needs a good buffing out too.

Gil@McKennaPerformance · 02-01-2013, 11:28 AM

Can't wait to see it installed!

Jbook · 02-01-2013, 08:47 PM

Quote:

Originally Posted by AASuperchargedE92

That looks sick, do yourself a favor and have it re-clear coated if its made by Arkym. Won't cost you much.

It's already on the car, but I'll see what a local shop says.

Quote:

Originally Posted by THE TECH

Is the piece a full CF part or is it just overlayed with carbon?

It definitely looks like it needs a good buffing out too.

It's a CF overlay and I figured I'd wait til it's on to do some buffing.

Quote:

Originally Posted by Gil@McKennaPerformance

Can't wait to see it installed!

I'll post a pic soon

tmntmn · 02-13-2013, 09:33 PM

Install it already! when are you free to meet up?

01-10-2013, 12:13 PM	#1
Jbook Captain Drives: '11 ESS E90 M3 Join Date: Sep 2010 Location: San Jose - Bay Area Posts: 783 iTrader: (15) Garage List 2011 BMW E90 M3 [5.00]	Arkym delays on ESS Plenums? NO ETA after over a month So I ordered my ESS supercharger with the Arkym CF plenum over a month ago (originally told there would be a lead time of 3 weeks). I went through vendors which are both on this forum which I have had very positive experiences with in the past. I'm not going to name names becaues I don't blame them AT ALL for what is occurring. I have been trying to get some sort of ETA on the kits arrival for the past couple of weeks and neither has been able to give me anything. Apparently the hold up is with Arkym on the CF plenum. They have not been able to get in touch with Arkym to figure out what the deal is hence them not being able to give me an ETA. Obviously I'm pretty upset about it since I've been out 5 digits for over a month and I can't even figure out when my kit will arrive (was supposed to be my Christmas gift to myself ). Has anyone had this sort of experience with Arkym? If you have the CF plenum how long did it take for yours to arrive? I'm considering cancelling my order and just going with some sort of painted finish, but I am also thinking I should just be patient since I've already waited this long. __________________ ESS VT2-625 w/ Stack Gauges \| Dinan Stg 2 Suspension, CF Strut Braces, & Pedals \| Akrapovic Exhaust \| Active Autowerke X-Pipe w/ HFC \| Vorsteiner VS-400 Wheels, CF Lip, CF Type II Diffuser, & White Piped Floormats \| BMW Performance CF Spoiler, CF Mirror Covers w/ M5 paint scheme, & Performance Steering Wheel w/ Custom White Stripe \| Apex Arc-8 track wheels
	Tweet

01-10-2013, 12:39 PM	#3
maaicher Captain Drives: Jet black E92 M3 Join Date: Nov 2008 Location: Los Angeles Posts: 701 iTrader: (10)	If you ordered through pyspeed that is the same thing as ordering through arkym. __________________ SOLD 2008 Jet Black E92 M3 * HRE C20 19in Wheels * KW Clubsport * Huper Ceramic Tint * Stop-Tech Trophy BBK Gintani SC & Gintani Custom Exhaust Vertice Front BumperArkym Diffuser

01-28-2013, 08:38 PM	#11
Jbook Captain Drives: '11 ESS E90 M3 Join Date: Sep 2010 Location: San Jose - Bay Area Posts: 783 iTrader: (15) Garage List 2011 BMW E90 M3 [5.00]	Thank you Roman!! I received the kit today and I can't wait to get it on. The CF plenum really is a thing of beauty and worth the wait. __________________ ESS VT2-625 w/ Stack Gauges \| Dinan Stg 2 Suspension, CF Strut Braces, & Pedals \| Akrapovic Exhaust \| Active Autowerke X-Pipe w/ HFC \| Vorsteiner VS-400 Wheels, CF Lip, CF Type II Diffuser, & White Piped Floormats \| BMW Performance CF Spoiler, CF Mirror Covers w/ M5 paint scheme, & Performance Steering Wheel w/ Custom White Stripe \| Apex Arc-8 track wheels

01-29-2013, 12:15 PM	#13
哇靠~M3 哇靠~M3! aka WaSai.M3 Drives: e92 M3 Join Date: Aug 2010 Location: 加州到台北 Posts: 625 iTrader: (5) Garage List 2009 E92 M3 [0.00]	__________________ M3Garage

01-29-2013, 04:30 PM	#16
alynM3 Sexual Chocolate Drives: '12 JB E92 Join Date: Nov 2011 Location: Los Angeles, CA Posts: 486 iTrader: (1) Garage List 2012 BMW M3 [0.00]	QUOTE=Jbook;13392546] Dropping the car off tomorrow morning! Also replaced my Dinan exhaust with a Akra slip-on and added Dinan CF struts and sway bar. Haven't posted pics with my new wheels either. My Stack gauges didn't come in even though those could have been shipped when I placed the order, but I'll live. [/quote] I always told myself I would drop the extra $1500 for the CF manifold if/when I did it. Looks like there are finger prints all over the place... lol somebody has been caressing this thing. __________________ 2012 Jerez Black E92 ZCP - MS Stage II - Custom Molded Challenge GT CF Race Diffuser - Custom Molded Gintani CF Rear Side Skirts - Custom Molded BMW Performance Splitters - Custom Molded BMW Performance Rear Spolier - RKP CRT CF Front Spoiler - Megan Racing Exhaust - Satin Black ZCPs - MS 15/12 MM - AiB 4.0 - CKS Adjustable Suspension - BC Forged TM-14

02-01-2013, 11:22 AM	#19
THE TECH BimmerPost Supporting Vendor Drives: BPMsport 2012 E92 M3 Join Date: Jun 2011 Location: Kansas Posts: 11,896 iTrader: (39)	Is the piece a full CF part or is it just overlayed with carbon? It definitely looks like it needs a good buffing out too. __________________ Check us out on Facebook at BPMsportLabs

02-01-2013, 11:28 AM	#20
Gil@McKennaPerformance BimmerPost Supporting Vendor Drives: E92 M3 Join Date: Jan 2013 Location: Norwalk, CA Posts: 114 iTrader: (2)	Can't wait to see it installed!

02-13-2013, 09:33 PM	#22
tmntmn Major Drives: e92 M3/M-DCT Join Date: Feb 2008 Location: Bay Area Posts: 1,470 iTrader: (5)	Install it already! when are you free to meet up? __________________ THANKS TO:~<SONICMS>~ ~<MODECARBON>~ ~<McKenna Performance>~ MODS: MODE CARBON GTS FRONT LIP & REAR DIFFUSER, RPI SCOOPS, PERFORMANCE STEERING WHEEL, BLACK ANODIZE Verstraβe Extended DCT Shifter, ZCP WHEELS (POWDER COATED), GLOSS BLACK KIDNEY GRILLS/VENTS/SIDE GRILLS, LCI TAIL LAMPS, LUX 3.0 H8, MTECH 6K D1S, KW SLEEVES, Megan Exhaust, ACM TP, BMS FIX, BMW LED INTERRIOR

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search