*brand new* FORGELINE 18x8.5F/18x10R WC3s in all satin black

[sg_wannabe]

BIMMERPOST / Classifieds

Asking Price:
USD 3,750.00

Location:

✓ Will Ship

Item Interest

$3250 + shipping for wheels

01.30.13 update: in an effort to clear out some space, i am now offering a finder's fee. you must refer the person to me (or vice versa) by pm or email. if you refer me to a person who ends up buying these wheels at the asking price of $3750 +shipping (and only at this price), then i will send you payment in the amount of $250. until the next update, i will offer these wheels for $3500 + shipping at this time. buyer is responsible for paypal fees, if applicable.

they are brand new but not technically BNIB since they were removed from the boxes to be inspected. no tires were mounted on them. i do have a set of brand new hankook v12 245/30/18s and 285/30/18s for them, however.

unfortunately, at this time, i do not have really good photos of them. still, i figure that i would post up this thread. honestly, there is not much of which to take pics since the wheels are brand new with absolutely no blemishes. i will try to get better pics up soon.

these were ordered directly from forgeline back in 10/2010 with specific fitment for my e46 m3. iirc, it took about 3 weeks for them to be built to order after i put down deposit. wheels have been kept in their original boxes all this time.

full specs
*3-piece forged using 6000-ton hydraulic press
*satin black center, outer lip, and inner lip
*matching satin black engraved aluminum center caps with only "forgeline"
*black oxide coated ARP 12-point stainless steel bolts
*oem (type, seat, and length) bolts are the proper ones for these wheels

fronts are 18x8.5, et 35 mm
the outer is 18x1.5; the inner is 18x7.0
center bore is 72.6
forgeline reports fronts are just under 20 lbs
front wheels will clear 355 mm brembo monoblock 6-piston bbk without a spacer and with plenty of clearance

rears are 18x10, et 27 mm
the outer is 18x3.0; the inner is 18x7.0
center bore is 72.6
forgeline reports rears are just under 21 lbs
rear wheels will clear 345 mm brembo monoblock 4-piston bbk without a spacer and with plenty of clearance.

total cost of wheels was over $4400 + shipping
asking price: $3750 + shipping

**i am in no rush at all to sell. my reason for selling is that i decided to get another set of wheels for my car. i think that these will be better used by someone else.
**also, i am not interested in trades.

these wheels are at a shop in the philadelphia area and will be shipped out directly from there. Pick up at the shop can be arranged for local buyers, of course. wheels will be shipped in their original boxes and packing material.

teaser pics that were sent to me:











i ask that folks refrain from comments about delays in completion of my car, etc. as well as any negative comments about the wheels or pricing. if you don't like or don't care, just move on along.

thanks for looking.

[sg_wannabe]

bump tt

[sg_wannabe]

bump tt

[sg_wannabe]

again

[sg_wannabe]

bump tt

[sg_wannabe]

bump tt

[sg_wannabe]

ttt for addition of FINDER'S FEE

[sg_wannabe]

bump still w/ finder's fee

[sg_wannabe]

bumpy

[sg_wannabe]

i will be willing to sell these wheels with brand new hankook v12s (245/35/18s and 285/30/18s) for $3750 + shipping. i will throw in mounting and balancing costs.

for the wheels alone, $3250 + shipping

[sg_wannabe]

bump up

[sg_wannabe]

bump ttt

[sg_wannabe]

bump it up

[sg_wannabe]

bump ttt

[sg_wannabe]

bumpy

[sg_wannabe]

ttt

[sg_wannabe]

bumpy

[sg_wannabe]

bumpy

[sg_wannabe]

bumpy

[e46M3_4Play]

nice wheels, GLWS

[sg_wannabe]

thanks
bumpy

[sg_wannabe]

bumpy