BMW M3 Forum (E90 E92)

BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Go Back   M3Post - BMW M3 Forum > E90/E92 M3 Technical Topics > Suspension | Brakes | Chassis
 
GT Haus
Post Reply
 
Thread Tools Search this Thread
      12-23-2012, 11:50 PM   #1
p66
Second Lieutenant
 
Drives: 1M
Join Date: May 2011
Location: Dallas, Texas

Posts: 238
iTrader: (1)

New Rotors

Anyone know of or using a replacement rotor that outperforms OEM on the track?
p66 is offline  
0
Reply With Quote
      12-24-2012, 02:40 AM   #2
mlhj83
Scythe-Meister
 
mlhj83's Avatar
 
Drives: '11 E92 M3 DCT ZCP
Join Date: Aug 2011
Location: London

Posts: 1,029
iTrader: (0)

A quick search would have given an answer. Performance Friction is the most popular one, but to be honest there aren't any discs on the market - in OEM dimensions - that is going to significantly outperform the OEM one, as the OEM one is pretty darn good. They are able to take a pretty good amount of abuse with the right pads, and the oem floating system is brilliant at allowing thermal expansion without the typical drawbacks of floating bobbins.

If you need a better brake setup despite using appropriate pads and oem discs, then you need an aftermarket brake kit from any of the reputable companies.
mlhj83 is offline   United Kingdom
0
Reply With Quote
      12-24-2012, 10:30 AM   #3
p66
Second Lieutenant
 
Drives: 1M
Join Date: May 2011
Location: Dallas, Texas

Posts: 238
iTrader: (1)

Thanks
p66 is offline  
0
Reply With Quote
      12-24-2012, 10:49 AM   #4
edwinm3
Lieutenant Colonel
 
edwinm3's Avatar
 
Drives: E92 MELBOURNE RED M3
Join Date: Nov 2011
Location: Doral

Posts: 1,823
iTrader: (8)

OEM
__________________
edwinm3 is offline   United_States
0
Reply With Quote
      01-02-2013, 08:36 PM   #5
M3PO
Colonel
 
M3PO's Avatar
 
Drives: '08 IB E92
Join Date: Sep 2011
Location: OC

Posts: 2,738
iTrader: (7)

Quote:
Originally Posted by mlhj83 View Post
A quick search would have given an answer. Performance Friction is the most popular one, but to be honest there aren't any discs on the market - in OEM dimensions - that is going to significantly outperform the OEM one, as the OEM one is pretty darn good. They are able to take a pretty good amount of abuse with the right pads, and the oem floating system is brilliant at allowing thermal expansion without the typical drawbacks of floating bobbins.

If you need a better brake setup despite using appropriate pads and oem discs, then you need an aftermarket brake kit from any of the reputable companies.
I just went to the track for the first time with Project Mu Club Racer pads and Castrol SRF. After 10-12 minutes, the brakes would start to vibrate. A few easier laps would reduce the problem and they were perfectly fine for the next session. I am overheating the rotors correct? The thermal expansion is creating temporary axial runout in the rotors?

No pad transfer on the rotors...
__________________
2008 IB E92 M3| BBS | KW | Arkym | Platte Forme A.G. | Active Autowerke | K&N | Fabspeed | Dinan | Evolve-R
M3PO is offline  
0
Reply With Quote
      01-02-2013, 10:07 PM   #6
bigjae1976
That's what she said...
 
bigjae1976's Avatar
 
Drives: 11 E90 M3 Individual
Join Date: Mar 2006
Location: Milwaukee, WI

Posts: 5,467
iTrader: (12)

Garage List
2004 BMW M3  [4.50]
2011 BMW E90 M3  [5.00]
2013 BMW 328i  [5.00]
Did you bed in the pads before doing hot laps?
__________________


Sponsored by Momentum BMW #593...We Bleed BMW BLUE!
bigjae1976 is offline  
0
Reply With Quote
      01-02-2013, 11:41 PM   #7
mlhj83
Scythe-Meister
 
mlhj83's Avatar
 
Drives: '11 E92 M3 DCT ZCP
Join Date: Aug 2011
Location: London

Posts: 1,029
iTrader: (0)

Quote:
Originally Posted by M3PO View Post
I just went to the track for the first time with Project Mu Club Racer pads and Castrol SRF. After 10-12 minutes, the brakes would start to vibrate. A few easier laps would reduce the problem and they were perfectly fine for the next session. I am overheating the rotors correct? The thermal expansion is creating temporary axial runout in the rotors?

No pad transfer on the rotors...
I use BMW M Sport pads and I've driven them to the point of absolute fade and have never had vibration under braking. I did however have significant vibration under braking when I tried the standard pads on track, which gradually disappeared (2 weeks after track day) as the uneven pad transfer wore off.

I'm inclined to think that yours is also due to uneven pad transfer. It's not something you can easily see. I'm fairly certain that most pads would overheat way before the OEM discs go beyond its maximum operating temperature. Also, once a disc is truly warped - not with axial runout due to pad deposits - it'll never recover, so by the fact that it gets better as you manage the brakes before the next session, points more towards uneven pad transfer.
mlhj83 is offline   United Kingdom
0
Reply With Quote
      01-03-2013, 05:21 PM   #8
M3PO
Colonel
 
M3PO's Avatar
 
Drives: '08 IB E92
Join Date: Sep 2011
Location: OC

Posts: 2,738
iTrader: (7)

Quote:
Originally Posted by mlhj83 View Post
I use BMW M Sport pads and I've driven them to the point of absolute fade and have never had vibration under braking. I did however have significant vibration under braking when I tried the standard pads on track, which gradually disappeared (2 weeks after track day) as the uneven pad transfer wore off.

I'm inclined to think that yours is also due to uneven pad transfer. It's not something you can easily see. I'm fairly certain that most pads would overheat way before the OEM discs go beyond its maximum operating temperature. Also, once a disc is truly warped - not with axial runout due to pad deposits - it'll never recover, so by the fact that it gets better as you manage the brakes before the next session, points more towards uneven pad transfer.
So if I follow you, you think I was over heating the pads, getting some uneven transfer, and then the easier laps were removing it?
__________________
2008 IB E92 M3| BBS | KW | Arkym | Platte Forme A.G. | Active Autowerke | K&N | Fabspeed | Dinan | Evolve-R
M3PO is offline  
0
Reply With Quote
      01-03-2013, 06:26 PM   #9
mlhj83
Scythe-Meister
 
mlhj83's Avatar
 
Drives: '11 E92 M3 DCT ZCP
Join Date: Aug 2011
Location: London

Posts: 1,029
iTrader: (0)

Quote:
Originally Posted by M3PO
Quote:
Originally Posted by mlhj83 View Post
I use BMW M Sport pads and I've driven them to the point of absolute fade and have never had vibration under braking. I did however have significant vibration under braking when I tried the standard pads on track, which gradually disappeared (2 weeks after track day) as the uneven pad transfer wore off.

I'm inclined to think that yours is also due to uneven pad transfer. It's not something you can easily see. I'm fairly certain that most pads would overheat way before the OEM discs go beyond its maximum operating temperature. Also, once a disc is truly warped - not with axial runout due to pad deposits - it'll never recover, so by the fact that it gets better as you manage the brakes before the next session, points more towards uneven pad transfer.
So if I follow you, you think I was over heating the pads, getting some uneven transfer, and then the easier laps were removing it?
Yes. Just be aware that uneven pad transfer can become permanent if you keep hammering the brakes, as the parts of the disc with pad deposits get hotter and hotter with each pass of the brake pad; more so than the parts of the disc with no deposits.

OEM pads take some time to scrub off deposits because the pads are generally quite soft and not very abrasive. Also, in general, pads are at their most abrasive when cold to slightly warm temperatures.
mlhj83 is offline   United Kingdom
0
Reply With Quote
      01-04-2013, 10:30 PM   #10
Chagrin
New Member
 
Drives: E90 S65 Moonstone Silver
Join Date: Jan 2011
Location: SGP

Posts: 11
iTrader: (0)

Quote:
Originally Posted by mlhj83 View Post
I use BMW M Sport pads and I've driven them to the point of absolute fade and have never had vibration under braking. I did however have significant vibration under braking when I tried the standard pads on track, which gradually disappeared (2 weeks after track day) as the uneven pad transfer wore off.

I'm inclined to think that yours is also due to uneven pad transfer. It's not something you can easily see. I'm fairly certain that most pads would overheat way before the OEM discs go beyond its maximum operating temperature. Also, once a disc is truly warped - not with axial runout due to pad deposits - it'll never recover, so by the fact that it gets better as you manage the brakes before the next session, points more towards uneven pad transfer.
May I ask if you are using the BMW M Sport pads with the stock rotors? Or do the rotors need to be changed as well?
Chagrin is offline  
0
Reply With Quote
      01-05-2013, 03:14 AM   #11
mlhj83
Scythe-Meister
 
mlhj83's Avatar
 
Drives: '11 E92 M3 DCT ZCP
Join Date: Aug 2011
Location: London

Posts: 1,029
iTrader: (0)

Quote:
Originally Posted by Chagrin
Quote:
Originally Posted by mlhj83 View Post
I use BMW M Sport pads and I've driven them to the point of absolute fade and have never had vibration under braking. I did however have significant vibration under braking when I tried the standard pads on track, which gradually disappeared (2 weeks after track day) as the uneven pad transfer wore off.

I'm inclined to think that yours is also due to uneven pad transfer. It's not something you can easily see. I'm fairly certain that most pads would overheat way before the OEM discs go beyond its maximum operating temperature. Also, once a disc is truly warped - not with axial runout due to pad deposits - it'll never recover, so by the fact that it gets better as you manage the brakes before the next session, points more towards uneven pad transfer.
May I ask if you are using the BMW M Sport pads with the stock rotors? Or do the rotors need to be changed as well?
I'm using them with the rotors that came with the car from factory, and not had any issues (5 track days). I'm aware that there are different OEM rotors specifically for the Sport pads which have different part numbers to the rotors that came from factory, but nobody knows the difference as they look exactly the same; materials might be slightly different perhaps. Best to send an email to BMW customer services for a definitive answer if you are interested.

Oh, I don't use the Sport pads on the road as they are way too noisy - I see pedestrians cringe when I come to a stop. I swap to the standard pads after a track day.
mlhj83 is offline   United Kingdom
0
Reply With Quote
      01-07-2013, 08:36 PM   #12
M3PO
Colonel
 
M3PO's Avatar
 
Drives: '08 IB E92
Join Date: Sep 2011
Location: OC

Posts: 2,738
iTrader: (7)

Quote:
Originally Posted by mlhj83 View Post
Yes. Just be aware that uneven pad transfer can become permanent if you keep hammering the brakes, as the parts of the disc with pad deposits get hotter and hotter with each pass of the brake pad; more so than the parts of the disc with no deposits.

OEM pads take some time to scrub off deposits because the pads are generally quite soft and not very abrasive. Also, in general, pads are at their most abrasive when cold to slightly warm temperatures.
Interesting. The confusing part for me was that they got better if I went easier on them and were perfect at the beginning of the next session (and even on the way home for that matter). I guess the pad transfer wore off during the remainder of the session.
__________________
2008 IB E92 M3| BBS | KW | Arkym | Platte Forme A.G. | Active Autowerke | K&N | Fabspeed | Dinan | Evolve-R
M3PO is offline  
0
Reply With Quote
      01-07-2013, 09:16 PM   #13
mlhj83
Scythe-Meister
 
mlhj83's Avatar
 
Drives: '11 E92 M3 DCT ZCP
Join Date: Aug 2011
Location: London

Posts: 1,029
iTrader: (0)

Quote:
Originally Posted by M3PO View Post
Interesting. The confusing part for me was that they got better if I went easier on them and were perfect at the beginning of the next session (and even on the way home for that matter). I guess the pad transfer wore off during the remainder of the session.
Sounds about right; when the pads cool, they become more abrasive, and probably cleaned the disc surface of uneven deposits. Or, your pads may have cooled to its ideal temperature range and laid an even layer of deposit all around the disc, while also spreading the existing uneven deposits evenly around the discs.
mlhj83 is offline   United Kingdom
0
Reply With Quote
      01-09-2013, 06:18 PM   #14
M3PO
Colonel
 
M3PO's Avatar
 
Drives: '08 IB E92
Join Date: Sep 2011
Location: OC

Posts: 2,738
iTrader: (7)

Quote:
Originally Posted by mlhj83 View Post
Sounds about right; when the pads cool, they become more abrasive, and probably cleaned the disc surface of uneven deposits. Or, your pads may have cooled to its ideal temperature range and laid an even layer of deposit all around the disc, while also spreading the existing uneven deposits evenly around the discs.
Cool, thanks for the explanation! Since there wasn't a degradation in braking (at least not that I noticed, track noob though), I assumed that the pads and fluid were okay.
__________________
2008 IB E92 M3| BBS | KW | Arkym | Platte Forme A.G. | Active Autowerke | K&N | Fabspeed | Dinan | Evolve-R
M3PO is offline  
0
Reply With Quote
      01-10-2013, 10:20 AM   #15
THE TECH
BimmerPost Supporting Vendor

 
THE TECH's Avatar
 
Drives: BPMsport 2012 E92 M3
Join Date: Jun 2011
Location: Kansas

Posts: 13,103
iTrader: (45)

Garage List
Send a message via AIM to THE TECH Send a message via Skype™ to THE TECH
The parts we've been working on with Racing Brake have been released. You can see details here: http://www.racingbrake.com/BMW-M3-E9...-p/2161-pu.htm
__________________
THE TECH is offline   United_States
0
Reply With Quote
      01-10-2013, 11:26 AM   #16
Z K
Colonel
 
Z K's Avatar
 
Drives: E90 M3
Join Date: Jul 2011
Location: San Francisco

Posts: 2,112
iTrader: (3)

Quote:
Originally Posted by THE TECH View Post
The parts we've been working on with Racing Brake have been released. You can see details here: http://www.racingbrake.com/BMW-M3-E9...-p/2161-pu.htm
Are the brake calipers specific for the M3 so they use the appropriate sized brake pistons so the stock f/r brake proportioning stays the same?
Z K is offline   United_States
0
Reply With Quote
      01-10-2013, 11:28 AM   #17
THE TECH
BimmerPost Supporting Vendor

 
THE TECH's Avatar
 
Drives: BPMsport 2012 E92 M3
Join Date: Jun 2011
Location: Kansas

Posts: 13,103
iTrader: (45)

Garage List
Send a message via AIM to THE TECH Send a message via Skype™ to THE TECH
Quote:
Originally Posted by Z K View Post
Are the brake calipers specific for the M3 so they use the appropriate sized brake pistons so the stock f/r brake proportioning stays the same?
That's correct.
__________________
THE TECH is offline   United_States
0
Reply With Quote
      01-10-2013, 06:25 PM   #18
M3PO
Colonel
 
M3PO's Avatar
 
Drives: '08 IB E92
Join Date: Sep 2011
Location: OC

Posts: 2,738
iTrader: (7)

Quote:
Originally Posted by THE TECH View Post
The parts we've been working on with Racing Brake have been released. You can see details here: http://www.racingbrake.com/BMW-M3-E9...-p/2161-pu.htm
Can I ask who manufactures the calipers? Are they manufactured by the same factory that other brake vendors use for example?
__________________
2008 IB E92 M3| BBS | KW | Arkym | Platte Forme A.G. | Active Autowerke | K&N | Fabspeed | Dinan | Evolve-R
M3PO is offline  
0
Reply With Quote
      01-10-2013, 06:28 PM   #19
THE TECH
BimmerPost Supporting Vendor

 
THE TECH's Avatar
 
Drives: BPMsport 2012 E92 M3
Join Date: Jun 2011
Location: Kansas

Posts: 13,103
iTrader: (45)

Garage List
Send a message via AIM to THE TECH Send a message via Skype™ to THE TECH
Quote:
Originally Posted by M3PO View Post
Can I ask who manufactures the calipers? Are they manufactured by the same factory that other brake vendors use for example?
As far as I've been told by the owner of Racing Brake himself, they do all the mfg. themselves.
__________________
THE TECH is offline   United_States
0
Reply With Quote
      01-11-2013, 10:08 PM   #20
Raucky2000
Lieutenant
 
Raucky2000's Avatar
 
Drives: SGM E90 M3 dct
Join Date: Nov 2012
Location: Ohio

Posts: 483
iTrader: (3)

Yup, THE TECH is all over this one...RB=great stuff.
Raucky2000 is offline  
0
Reply With Quote
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 06:19 AM.




m3post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST