Have a rader detector? Hate the suction cups?

Edmbimmer88 · 01-10-2013, 12:55 AM

Blendmount has finally released mounts for the BMW mirror.

Installed it today, going to go with the V1 DIY. Also going to mount by Blackvue camera underneath my STI.

Highly recommend it!

Nicname · 01-10-2013, 06:52 AM

Awesome find. If only they had the power cord for bmws....

pbonsalb · 01-10-2013, 07:54 AM

You could just tap into power up in the roof console, bring it down through the tube for the mirror base and drill a small hole to bring it back out for the mirror mounted detector. Watch the Valentine DIY install at M3Forum.net for details. It is the green/white wire in the second wire block (next to the very small block) that you tap use. Test with a test light with ignition on and off. The red/white wire next to it is always on so you don't want to use that.

Phanto///M · 01-10-2013, 09:11 AM

I have an escort 9500 ix and I had it wired so the little module is in my ashtray. You can't even tell its there. If this was available when I installed mine this would have been a simpler option.

w00tw00t · 01-10-2013, 09:22 AM

I like the idea but then it hangs too low for me... and is too visible... I like how my 9500ix is tucked in almost hidden from view so I don't have to worry about hiding it everytime I get out of the car.

THE TECH · 01-10-2013, 10:00 AM

I prefer the unit in the mirror. Check out radar-mirror.com

vastano · 01-10-2013, 12:29 PM

Did the part # end with 2014? Looking for options for my V1...

Edmbimmer88 · 01-10-2013, 12:51 PM

Quote:

Originally Posted by THE TECH

I prefer the unit in the mirror. Check out radar-mirror.com

Starting at $1599 my money is better spent on other things. And the amount of work to do it the $140 dollar Blendmount makes sense. I guess you have a lot of expendable time and money.

Quote:

Originally Posted by vastano

Did the part # end with 2014? Looking for options for my V1...

Yes, that is the model I ordered. Completed the install as per http://www.m3post.com/forums/showthread.php?t=409010 and piggy backed the power for my dash cam.

THE TECH · 01-10-2013, 12:57 PM

Quote:

Originally Posted by Edmbimmer88

Starting at $1599 my money is better spent on other things. And the amount of work to do it the $140 dollar Blendmount makes sense. I guess you have a lot of expendable time and money.

Yes, that is the model I ordered. Completed the install as per http://www.m3post.com/forums/showthread.php?t=409010 and piggy backed the power for my dash cam.

Huh? $1599?

It's $799 depending on which mirror you have which includes a fully refundable core charge of $400 so it really only costs $399. You only glanced at the page. $1599 is a complete system with the radar detector and all sorts of other parts.

Edmbimmer88 · 01-10-2013, 01:09 PM

Quote:

Originally Posted by THE TECH

Huh? $1599?

It's $799 depending on which mirror you have which includes a fully refundable core charge of $400 so it really only costs $399. You only glanced at the page. $1599 is a complete system with the radar detector and all sorts of other parts.

Sure I glanced, but lets take into account the amount of work to do the work to change over of mirrors. And yes, you still need a radar detector so why isn't it something to consider?

Wow, I thought this wouldn't get shit on. But I guess I was wrong. Thanks TECH. I'm still happy with the $140 dollars I spent.

THE TECH · 01-10-2013, 01:16 PM

Quote:

Originally Posted by Edmbimmer88

Sure I glanced, but lets take into account the amount of work to do the work to change over of mirrors. And yes, you still need a radar detector so why isn't it something to consider?

Wow, I thought this wouldn't get shit on. But I guess I was wrong. Thanks TECH. I'm still happy with the $140 dollars I spent.

There is very little work to change the mirror. The detector is not something in question since you will need it regardless of what route you take in the endeavor.

I'm indeed happy that you like your outcome. I was providing another option that I enjoy.

tom @ eas · 01-10-2013, 01:53 PM

Quote:

Originally Posted by Edmbimmer88

Sure I glanced, but lets take into account the amount of work to do the work to change over of mirrors. And yes, you still need a radar detector so why isn't it something to consider?

Wow, I thought this wouldn't get shit on. But I guess I was wrong. Thanks TECH. I'm still happy with the $140 dollars I spent.

That's all that counts, that you are happy.

Thanks for taking the time to share your review.

icantdrive · 01-10-2013, 02:52 PM

Quote:

Originally Posted by THE TECH

There is very little work to change the mirror. The detector is not something in question since you will need it regardless of what route you take in the endeavor.

I'm indeed happy that you like your outcome. I was providing another option that I enjoy.

Do you have the same setup?

THE TECH · 01-10-2013, 02:56 PM

Quote:

Originally Posted by icantdrive

Do you have the same setup?

Yes, I have the radar-mirror.

icantdrive · 01-10-2013, 02:58 PM

Quote:

Originally Posted by THE TECH

Yes, I have the radar-mirror.

Nice. I may just go that route!

vastano · 01-23-2013, 06:39 AM

I was gonna tough it out with the suctions cups, but the new ones I bought keep falling off. I just ordered the blend mount for the V1.

Side note, use coupon code FRIEND for 12.5% off.

spdy330 · 01-23-2013, 11:37 PM

I like my mega suction cup mount. Less than $30.00 on ebay and rately faslls off. Way better that the original.

Blendmount will not work on my car with the rain sensor on the mirror.

Quote:

Originally Posted by vastano

I was gonna tough it out with the suctions cups, but the new ones I bought keep falling off. I just ordered the blend mount for the V1.

Side note, use coupon code FRIEND for 12.5% off.

vastano · 01-24-2013, 06:27 AM

Quote:

Originally Posted by spdy330

I like my mega suction cup mount. Less than $30.00 on ebay and rately faslls off. Way better that the original.

Blendmount will not work on my car with the rain sensor on the mirror.

you do know blendmount updated their design, right?

s4play · 02-28-2013, 04:48 PM

I don't see it on the Blendmount site?

Isn't there another method I saw somewhere that allows you to mount the main V1 unit in the rear near the headrest? Keeps it out of sight....

creaminz · 03-01-2013, 10:59 PM

$140...? Man v1 mount for nissan/infiniti was $25 and it mounts the same, pretty much same damn thing...

M3amigos · 05-14-2013, 05:15 PM

Not sure if this has been mentioned previously, but there is another alternative from country joy crafts...

http://www.countryjoycrafts.com/escortmount.html

It's a little lighter on the wallet at only $60...

lsmkr01 · 05-14-2013, 09:35 PM

Quote:

Originally Posted by THE TECH

I prefer the unit in the mirror. Check out radar-mirror.com

Oh snap this looks perfect? You already using one from this place? How is it working; auto dimming, quality, fit and finish etc?

EDIT: Never mind, I just saw it cost $2400....

01-10-2013, 12:55 AM	#1
Edmbimmer88 Private Drives: 09 e92 M3 Join Date: Jul 2012 Location: Edmonton Posts: 88 iTrader: (3)	Have a rader detector? Hate the suction cups? Blendmount has finally released mounts for the BMW mirror. Installed it today, going to go with the V1 DIY. Also going to mount by Blackvue camera underneath my STI. Highly recommend it!
	Tweet

01-10-2013, 06:52 AM	#2
Nicname Captain Drives: '12 M3 E92 JB Join Date: Oct 2011 Location: Bergen County, NJ Posts: 790 iTrader: (2)	Awesome find. If only they had the power cord for bmws.... __________________ '12 E92 ///M3 DCT loaded l Lux 5000k H8 l Gintani Sport l Gintani HFC x-pipe l Velos Tuning l Amuse Trunk l 20 % tints l Black kidneys/reflectors

01-10-2013, 09:22 AM	#5
w00tw00t Major Drives: 2013 E92 M3 AW Join Date: Oct 2010 Location: Seattle Posts: 1,295 iTrader: (9)	I like the idea but then it hangs too low for me... and is too visible... I like how my 9500ix is tucked in almost hidden from view so I don't have to worry about hiding it everytime I get out of the car. __________________ M3 E92 AW \| Semi-Stripped Interior \| APEX EC-7 18x10 ET25 \| APEX Wheel Studs \| Akrapovic Evo \| Brembo GT 380 BBK \| Pagid RS29 \| BMC Air Filter \| AiM Solo DL \| OMP WRC Seats w/ Planted Brackets \| Challenge Harness Bar \| Schroth Profi II-6 Hans \| KW Clubsport \| Euro MDM & BPM Tune \| NT01 \| BFG R1 \| NT05 2013 Trackdays # \| 7 \|

01-10-2013, 10:00 AM	#6
THE TECH BimmerPost Supporting Vendor Drives: BPMsport 2012 E92 M3 Join Date: Jun 2011 Location: Kansas Posts: 11,936 iTrader: (39)	I prefer the unit in the mirror. Check out radar-mirror.com __________________ Check us out on Facebook at BPMsportLabs

02-28-2013, 04:48 PM	#19
s4play Car Tuning Geek Drives: too many rides.... Join Date: Dec 2006 Location: Norcal Posts: 451 iTrader: (0)	I don't see it on the Blendmount site? Isn't there another method I saw somewhere that allows you to mount the main V1 unit in the rear near the headrest? Keeps it out of sight.... __________________ 04 GPW/Onyx NSX 09 GPW > CR s2000 08 White Lexus IS-F replaced with 09 White BMW M3 12 Lexus CT200h *Gone, but not forgotten: (gt3/m3) http://www.m3forum.net/m3forum/showthread.php?t=203205

01-10-2013, 07:54 AM	#3
pbonsalb Major Drives: 08 E90 M3, 99 E36 M3 Turbo Join Date: Feb 2011 Location: Concord, NH Posts: 1,177 iTrader: (3)	You could just tap into power up in the roof console, bring it down through the tube for the mirror base and drill a small hole to bring it back out for the mirror mounted detector. Watch the Valentine DIY install at M3Forum.net for details. It is the green/white wire in the second wire block (next to the very small block) that you tap use. Test with a test light with ignition on and off. The red/white wire next to it is always on so you don't want to use that.

01-10-2013, 09:11 AM	#4
Phanto///M Second Lieutenant Drives: 08 E92 M3 Join Date: Nov 2012 Location: Long Island Posts: 239 iTrader: (0)	I have an escort 9500 ix and I had it wired so the little module is in my ashtray. You can't even tell its there. If this was available when I installed mine this would have been a simpler option.

01-10-2013, 12:29 PM	#7
vastano Private First Class Drives: E90 M3 Join Date: Nov 2012 Location: Charlotte, NC/Greenville, SC Posts: 130 iTrader: (0)	Did the part # end with 2014? Looking for options for my V1...

01-23-2013, 06:39 AM	#16
vastano Private First Class Drives: E90 M3 Join Date: Nov 2012 Location: Charlotte, NC/Greenville, SC Posts: 130 iTrader: (0)	I was gonna tough it out with the suctions cups, but the new ones I bought keep falling off. I just ordered the blend mount for the V1. Side note, use coupon code FRIEND for 12.5% off.

03-01-2013, 10:59 PM	#20
creaminz Major General Drives: E90 LCI Join Date: Sep 2005 Location: So. Cal Posts: 6,943 iTrader: (31)	$140...? Man v1 mount for nissan/infiniti was $25 and it mounts the same, pretty much same damn thing...

05-14-2013, 05:15 PM	#21
M3amigos HP addict Drives: 2008 Jerez Black E93 6MT Join Date: Nov 2012 Location: Orlando, FL Posts: 233 iTrader: (0)	Not sure if this has been mentioned previously, but there is another alternative from country joy crafts... http://www.countryjoycrafts.com/escortmount.html It's a little lighter on the wallet at only $60... __________________ 2008 Jerez Black Metallic E93 6MT K&N Drop In Filter \| HPA Pulley \| Custom Catless Resonated X-Pipe \| BPM Stage II Tune \| Megan Racing Exhaust

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search