DIY : WeissLicht PY24W LED Turn Signal Bulb - Page 6

wjesco · 12-27-2012, 12:06 PM

Hello all,

I am getting a right turn signal malfunction after installing my WeissLicht Amber Turn Signal bulbs

. Has anyone here experienced the same problem. I am at the dealership for an Auto Butler service and Oil Change and I asked the SA and he told me that it could be because I replaced a halogen bulb with an LED bulb that has less resistance.

I thought these things were supposed to be error free? I am only getting the error against the right side turn signal even though they both seem to work just fine.

Any ideas?

Thanks,

Kris@Modmynav · 12-27-2012, 12:27 PM

Quote:

Originally Posted by wjesco

Hello all,

I am getting a right turn signal malfunction after installing my WeissLicht Amber Turn Signal bulbs

. Has anyone here experienced the same problem. I am at the dealership for an Auto Butler service and Oil Change and I asked the SA and he told me that it could be because I replaced a halogen bulb with an LED bulb that has less resistance.

I thought these things were supposed to be error free? I am only getting the error against the right side turn signal even though they both seem to work just fine.

Any ideas?

Thanks,

Same here, mine throw the same error - right turn signal malfunction.

However it goes away after few blinks, it seems like I am getting this after I turn on/off the hazard lights.

I am going to code out bulb checks..

wjesco · 12-27-2012, 11:45 PM

Quote:

Originally Posted by Kris@Modmynav

Quote:

Originally Posted by wjesco

Hello all,

I am getting a right turn signal malfunction after installing my WeissLicht Amber Turn Signal bulbs

. Has anyone here experienced the same problem. I am at the dealership for an Auto Butler service and Oil Change and I asked the SA and he told me that it could be because I replaced a halogen bulb with an LED bulb that has less resistance.

I thought these things were supposed to be error free? I am only getting the error against the right side turn signal even though they both seem to work just fine.

Any ideas?

Thanks,

Same here, mine throw the same error - right turn signal malfunction.

However it goes away after few blinks, it seems like I am getting this after I turn on/off the hazard lights.

I am going to code out bulb checks..

How do you code out the bulb check?

Kris@Modmynav · 12-28-2012, 12:29 AM

Quote:

Originally Posted by wjesco

How do you code out the bulb check?

Custom coding..

wjesco · 01-02-2013, 11:18 AM

Quote:

Originally Posted by Kris@Modmynav

Quote:

Originally Posted by wjesco

How do you code out the bulb check?

Custom coding..

I have decided to return the bulbs and re-install my egg yolks

I don't feel comfortable coding off bulb checks on a relatively new car. If this was my 1995 325is I wouldn't think twice about it.
I guess I will wait till someone makes stealth bulbs that are actually error free.

cntgetm3 · 02-05-2013, 06:05 PM

Just installed mine ($22 ebay) they look good. havent taken her out yet so no coding issues over here. Ill post a Video once im done editing. *myediting skills leave much to be desired*

12-27-2012, 12:06 PM	#111
wjesco Engineer Drives: 2011 IB M3 Sedan Join Date: May 2011 Location: Orlando, FL Posts: 41 iTrader: (0)	Hello all, I am getting a right turn signal malfunction after installing my WeissLicht Amber Turn Signal bulbs . Has anyone here experienced the same problem. I am at the dealership for an Auto Butler service and Oil Change and I asked the SA and he told me that it could be because I replaced a halogen bulb with an LED bulb that has less resistance. I thought these things were supposed to be error free? I am only getting the error against the right side turn signal even though they both seem to work just fine. Any ideas? Thanks, __________________ 2011 E90 M3 M-Individual Fox Red/Black Two Tone Interior/Steering wheel,3D Design front lip,Type II Diffuser,IND reflectors,Cyber Scoops,Performance front grills/side grilles w/LED light, Macht Schnell Spacers, ZCP,ZCV,ZP3,6MT,Split rear seat, BMW Apps, EPS 1995 325is, 1991 735iL

02-05-2013, 06:05 PM	#116
cntgetm3 Private First Class Drives: E92 M3 Join Date: Feb 2012 Location: Jville, NC Posts: 150 iTrader: (0)	Just installed mine ($22 ebay) they look good. havent taken her out yet so no coding issues over here. Ill post a Video once im done editing. myediting skills leave much to be desired __________________ [IMG]http://www.bimmerpost.com/forums/attachment.php?attachmentid=133578&d=1204654487[/IMG Lux v3, IND, V1 Hardwire, ZHP lighted shift knob, Megan Racing Axel Back, Topspeed race x-pipe, MS filter, Arkym Diffuser, and still more to come.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search