BMW M3 Forum (E90 E92)

BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Go Back   M3Post - BMW M3 Forum > E90/E92 M3 Technical Topics > Coding / ConnectedDrive / Audio-Video / Electronics / Bluetooth / I-Drive & Nav
 
House Motorsports
Post Reply
 
Thread Tools Search this Thread
      12-18-2012, 05:53 PM   #1
aussiem3
Lieutenant Colonel
aussiem3's Avatar
Australia
51
Rep
1,959
Posts

Drives: Goggomobil
Join Date: Jul 2007
Location: Kangaroo land

iTrader: (1)

Garage List
2007 E92 M3  [0.00]
Accessing Key setting in CIC

I have upgraded my CCC to CIC as you know. In CCC under the M Drive menu there were sub-menus MDrive and Key Settings. But since the retrofit of the CIC, I can't access the Key settings to change. Anyone got any idea how I can access the key settings via idrive or any other way to change my settings please. Since tuning the car thru Mike I no longer need the aggressive setup on start up. Currently, I am manually turning the settings off.

The only other option I have at the moment is putting back the CCC and changing the key settings. This is a headache given that I will have to re-pin the power connector to the display.
__________________
E92 M3 2007 - ///PE with Test Pipes and BPM Stage II; CF Interior & Splitters; CIC with Connected Drive
Appreciate 0
      12-18-2012, 05:59 PM   #2
///M Ryder
Grown Azz Man
///M Ryder's Avatar
United_States
62
Rep
2,694
Posts

Drives: 2011.5 Dinan ///M3
Join Date: Dec 2010
Location: Sugar Land

iTrader: (5)

Go to M Drive and slide the controller over to the right........Phil
__________________
2011.5 E92 Dinan///M3: SSII DCT- Comp, Prem 2, Conv Pkg, Heated Seats, Enhanced Prem Sound, Edition Grills/Gills, M Perf Steering Wheel, C/F Perf Spoiler, BMW Pedals, Dinan Exhaust, Dinan X-Pipe, Dinan C/F Intake, Dinan Software Tune, Dinan DCT Tune, Dinan Pulley Kit, Dinan CH-R Wheels, Dinan C/F Strut Tower Braces, Arkym Lip, IND M5 Mirror Caps, Carbon Reflectors, Lux H8 V3, Brembo 365mm BBK, Swift Spec-R Springs + Track Gear
Appreciate 0
      12-18-2012, 06:02 PM   #3
aussiem3
Lieutenant Colonel
aussiem3's Avatar
Australia
51
Rep
1,959
Posts

Drives: Goggomobil
Join Date: Jul 2007
Location: Kangaroo land

iTrader: (1)

Garage List
2007 E92 M3  [0.00]
Thank you, I will try it when I am in the car this morning. Cheers
__________________
E92 M3 2007 - ///PE with Test Pipes and BPM Stage II; CF Interior & Splitters; CIC with Connected Drive
Appreciate 0
      12-18-2012, 06:12 PM   #4
aussiem3
Lieutenant Colonel
aussiem3's Avatar
Australia
51
Rep
1,959
Posts

Drives: Goggomobil
Join Date: Jul 2007
Location: Kangaroo land

iTrader: (1)

Garage List
2007 E92 M3  [0.00]
In fact after accessing the M Drive through the CIC you need to press the Options key. This will give a menu for M setting as well as M Key Settings. Then you change it. Switch off ignition, take the key out, and put it back in, and restart the car.

I after the nudge from M Ryder, I had to go and figure out myself. In fact thru the options, you can also reset the M setting. Greater options.
__________________
E92 M3 2007 - ///PE with Test Pipes and BPM Stage II; CF Interior & Splitters; CIC with Connected Drive
Appreciate 0
      12-22-2012, 07:38 PM   #5
PhoenixRising
Important text here
United_States
4
Rep
130
Posts

Drives: 2013 M3 Conv
Join Date: Dec 2012
Location: Phoenix, AZ

iTrader: (0)

Garage List
So what is the difference between the 'M' key and the 'M' settings in the previous menu?
Appreciate 0
      12-22-2012, 11:09 PM   #6
aussiem3
Lieutenant Colonel
aussiem3's Avatar
Australia
51
Rep
1,959
Posts

Drives: Goggomobil
Join Date: Jul 2007
Location: Kangaroo land

iTrader: (1)

Garage List
2007 E92 M3  [0.00]
M setting is for the M button on the steering wheel. While you are driving and if you are in a playful mood you can make use of the settings by pressing the M button.

M Key setting is, when you start the car with a particular key, the setting store are your default settings. That way you don't need to change the settings every time you get in the car. These are only dynamic - suspension and chassis settings. Hope this is explained.
__________________
E92 M3 2007 - ///PE with Test Pipes and BPM Stage II; CF Interior & Splitters; CIC with Connected Drive
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 02:50 PM.




m3post
m3post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST