Monthly Group Buy for Pagid Racing Pads - RS-14 RS-19 RS-29 - Page 2

1MOREMOD · 06-29-2012, 09:28 PM

Thought group buy was off so I just ordered rs19s anyway from richard. Nice step from ds2500s

1MOREMOD · 07-06-2012, 12:40 AM

update. installed the rs19s and bedded them in a couple days ago. feel very strong. im surprised how much bite i have without abs coming into play. anxious to see how they feel on the track the 22nd.

Richard@M-World · 10-30-2012, 02:38 AM

GB will be continued on a monthly basis. November GB is now open.

Please reply in the following format:
name, compound, application

surlynkid · 10-30-2012, 09:30 AM

I am in for the following:

Pagid RS-29 for ST-60
Pagid RS-29 for ST-40

Thanks,
Scott

Richard@M-World · 11-01-2012, 07:23 PM

Quote:

Originally Posted by surlynkid

I am in for the following:

Pagid RS-29 for ST-60
Pagid RS-29 for ST-40

Thanks,
Scott

Got it. Thanks.

Richard@M-World · 11-06-2012, 11:06 PM

Reno - RS29 - AP Racing front and rear

texastate · 11-08-2012, 02:56 PM

texastate - RS19 for OEM Front - E92

Richard@M-World · 11-23-2012, 11:49 PM

Nov. GB closing next week!

Richard@M-World · 12-12-2012, 04:54 PM

Prices going up by 4% effective 1/1/2013. Take advantage of the last group buy at lower prices this month!

NELSON.MLGB · 12-12-2012, 05:17 PM

Pm price for oem set ship to T3K3H1

SuitedPair · 12-17-2012, 10:41 AM

Quote:

Originally Posted by Richard@M-World

Prices going up by 4% effective 1/1/2013. Take advantage of the last group buy at lower prices this month!

I think the only setup for my E90 M3 stock calipers are the RS19 for both front and rear, correct? Put me on the list...

Suitedpair, RS19, front and rear for OEM calipers

thanks!

Richard@M-World · 12-17-2012, 08:45 PM

Quote:

Originally Posted by SuitedPair

I think the only setup for my E90 M3 stock calipers are the RS19 for both front and rear, correct? Put me on the list...

Suitedpair, RS19, front and rear for OEM calipers

thanks!

Got it. Thanks!

r53s65e90 · 12-18-2012, 02:22 AM

I still have a lot of pad material left so I am not taking part in this month's group by. Just wanted to share my experiences with Stoptech Street Performance and RS19.

See attachment with front pads for comparison. Both pads used only for bedding, driving to the track and then were replaced with the stock pads.

Top: Stoptech pad after 6 sessions at laguna. 6 mm of material left. Initial material is 17mm (22mm with backing plate). They are much better than stock.

Bottom: Pagid RS 19 after 10 sessions at laguna. Material left 12mm. Initial material 14mm (19mm with backing plate). They feel much much better and stop harder than stoptech street performance. On the street they are quiet if they soak in plastilube. Once that has burned off at the track, they are better than a loud exhaust in attracting attention. My wife hated it, so it is ideal if you don't want you significant other to drive the car.

$ per session stoptech: Price about $100. 17-6 mm in 6 sessions at a rate of 100/17 $/mm gives us $10.8 per session.
$ per session rs 19: Price about $360. 14-12 mm in 10 sessions at a rate of 360/14 $/mm yields $3.8 per session.

This, not considering more pad changes which is time if you DIY or time+money if you take it to a mechanic. Also not considering the fact that street pads below 4-5 mm are not suitable for anything beyond 7/10 driving.

Also, you can count on a great shopping experience with Richard.

SP33DRCR · 12-18-2012, 12:24 PM

Hey Richard, not sure if this is an ongoing offer...

I just started tracking my e92 M3 a few months ago. I first got hooked up with a brand of pads called Carbotech with stock brake system. The braking performance was really great--nice feel and very effective. But wear (and heat) were major problems. I'd get one day out of a set of pads. I tried their XP-10 and XP-12 compound--and even put in ducting to help with heat. But no improvement.

I picked up some Pagid RS 19s, and was able to get an entire weekend in without a wear problem--I haven't measured them yet, but they look pretty good on a visual. But they didn't feel as effective as the Carbotechs, especially in threshhold breaking situations. There was a pretty long pause before the car started to slow after I hit the brakes, and this seemed to get worse as the system heated up (towards the end of long sessions). Do the 29's perform better?

I am considering upgrading to the Alcon Superkit (384mm fronts and I am not sure of the size of the rears). Can you get pads for this kit, and how much for the 19s and 29s?

Thanks,
Eric

Richard@M-World · 12-26-2012, 05:10 AM

Quote:

Originally Posted by r53s65e90

I still have a lot of pad material left so I am not taking part in this month's group by. Just wanted to share my experiences with Stoptech Street Performance and RS19.

See attachment with front pads for comparison. Both pads used only for bedding, driving to the track and then were replaced with the stock pads.

Top: Stoptech pad after 6 sessions at laguna. 6 mm of material left. Initial material is 17mm (22mm with backing plate). They are much better than stock.

Bottom: Pagid RS 19 after 10 sessions at laguna. Material left 12mm. Initial material 14mm (19mm with backing plate). They feel much much better and stop harder than stoptech street performance. On the street they are quiet if they soak in plastilube. Once that has burned off at the track, they are better than a loud exhaust in attracting attention. My wife hated it, so it is ideal if you don't want you significant other to drive the car.

$ per session stoptech: Price about $100. 17-6 mm in 6 sessions at a rate of 100/17 $/mm gives us $10.8 per session.
$ per session rs 19: Price about $360. 14-12 mm in 10 sessions at a rate of 360/14 $/mm yields $3.8 per session.

This, not considering more pad changes which is time if you DIY or time+money if you take it to a mechanic. Also not considering the fact that street pads below 4-5 mm are not suitable for anything beyond 7/10 driving.

Also, you can count on a great shopping experience with Richard.

Thank you sir for the great info and your kind words!

Richard@M-World · 12-26-2012, 05:12 AM

thorny, RS19, E92 OEM front and rear

Richard@M-World · 01-12-2013, 03:18 AM

January GB is open for your orders

1MOREMOD · 01-12-2013, 01:39 PM

whats the price for rs-19 rear for stock calipers? can you compare with pfc 08s?

FormulaMMM · 01-12-2013, 04:03 PM

Interested in RS19 for stock rear.

Have the RS29s up front with ST40 kit. Ran them most of last year -- apparently indestructible or I'm not driving fast enough.

leo95se · 01-12-2013, 04:30 PM

rs-19, fronts please

Richard@M-World · 01-13-2013, 12:30 AM

Quote:

Originally Posted by chriszeh

whats the price for rs-19 rear for stock calipers? can you compare with pfc 08s?

Quote:

Originally Posted by FormulaMMM

Interested in RS19 for stock rear.

Have the RS29s up front with ST40 kit. Ran them most of last year -- apparently indestructible or I'm not driving fast enough.

Quote:

Originally Posted by leo95se

rs-19, fronts please

PMs replied!

Groundpilot · 01-17-2013, 01:41 PM

RS 19 front/rear OE Calipers please

06-29-2012, 09:28 PM	#23
1MOREMOD Major General Drives: at a moderate pace Join Date: Mar 2009 Location: garage Posts: 6,514 iTrader: (3)	Thought group buy was off so I just ordered rs19s anyway from richard. Nice step from ds2500s __________________ 02 Tiag e46 M3\|6MT\|GC plates\|MCS c.o.\|GC race control arms\|GC bushings & bearings\|BW eng. & tran. mounts\|subframe kit\|BW race shifter\|BW Jaffster knob\|Euro header\|Eisenmann sport\|K&N c.a.i.\|Seibon CF hood\|CSL bumper\|CSL brakes\|RS19s\|SS lines\|half cage\|Recaro profi\|Profi 2 harness\|race pulleys\|BMWpedals\|Apex studs\|1995 Ford Probe gt chump car\|

07-06-2012, 12:40 AM	#24
1MOREMOD Major General Drives: at a moderate pace Join Date: Mar 2009 Location: garage Posts: 6,514 iTrader: (3)	update. installed the rs19s and bedded them in a couple days ago. feel very strong. im surprised how much bite i have without abs coming into play. anxious to see how they feel on the track the 22nd. __________________ 02 Tiag e46 M3\|6MT\|GC plates\|MCS c.o.\|GC race control arms\|GC bushings & bearings\|BW eng. & tran. mounts\|subframe kit\|BW race shifter\|BW Jaffster knob\|Euro header\|Eisenmann sport\|K&N c.a.i.\|Seibon CF hood\|CSL bumper\|CSL brakes\|RS19s\|SS lines\|half cage\|Recaro profi\|Profi 2 harness\|race pulleys\|BMWpedals\|Apex studs\|1995 Ford Probe gt chump car\|

10-30-2012, 02:38 AM	#25
Richard@M-World BimmerPost Supporting Vendor Drives: NASA TTA #92 M3 Join Date: May 2011 Location: TX/IL Posts: 621 iTrader: (0)	GB will be continued on a monthly basis. November GB is now open. Please reply in the following format: name, compound, application __________________ Authorized AiM Dealer & Data Specialist - AiM Solo \| AiM Solo DL \| AiM SmartyCam HD Authorized Pagid Brake Pads Dealer - RS19 \| RS29 \| RS14 for M3/1M OEM Calipers, StopTech, AP Racing, Alcon & Brembo w: www.m-world.us e: info@m-world.us t: 832-408-1234

11-06-2012, 11:06 PM	#28
Richard@M-World BimmerPost Supporting Vendor Drives: NASA TTA #92 M3 Join Date: May 2011 Location: TX/IL Posts: 621 iTrader: (0)	Reno - RS29 - AP Racing front and rear __________________ Authorized AiM Dealer & Data Specialist - AiM Solo \| AiM Solo DL \| AiM SmartyCam HD Authorized Pagid Brake Pads Dealer - RS19 \| RS29 \| RS14 for M3/1M OEM Calipers, StopTech, AP Racing, Alcon & Brembo w: www.m-world.us e: info@m-world.us t: 832-408-1234

11-08-2012, 02:56 PM	#29
texastate Private Drives: 2008 BMW M3 Join Date: Jun 2012 Location: Atlanta, GA Posts: 79 iTrader: (0)	texastate - RS19 for OEM Front - E92 __________________ 2008 BMW M3 E92 (DCT) ~ 2006 Lamborghini Gallardo Coupe 2009 SL65 AMG Renntech Stage 3 ~ 2007 GT3 - Silver/Alcantera interior 2009 Chevy Z06 - Carbon Grey ~ 2009 Audi S5

10-30-2012, 09:30 AM	#26
surlynkid Lieutenant Drives: 2013 E92 M3 Join Date: Apr 2012 Location: League City, TX Posts: 523 iTrader: (1)	I am in for the following: Pagid RS-29 for ST-60 Pagid RS-29 for ST-40 Thanks, Scott

11-23-2012, 11:49 PM	#30
Richard@M-World BimmerPost Supporting Vendor Drives: NASA TTA #92 M3 Join Date: May 2011 Location: TX/IL Posts: 621 iTrader: (0)	Nov. GB closing next week! __________________ Authorized AiM Dealer & Data Specialist - AiM Solo \| AiM Solo DL \| AiM SmartyCam HD Authorized Pagid Brake Pads Dealer - RS19 \| RS29 \| RS14 for M3/1M OEM Calipers, StopTech, AP Racing, Alcon & Brembo w: www.m-world.us e: info@m-world.us t: 832-408-1234

12-12-2012, 04:54 PM	#31
Richard@M-World BimmerPost Supporting Vendor Drives: NASA TTA #92 M3 Join Date: May 2011 Location: TX/IL Posts: 621 iTrader: (0)	Prices going up by 4% effective 1/1/2013. Take advantage of the last group buy at lower prices this month! __________________ Authorized AiM Dealer & Data Specialist - AiM Solo \| AiM Solo DL \| AiM SmartyCam HD Authorized Pagid Brake Pads Dealer - RS19 \| RS29 \| RS14 for M3/1M OEM Calipers, StopTech, AP Racing, Alcon & Brembo w: www.m-world.us e: info@m-world.us t: 832-408-1234

12-12-2012, 05:17 PM	#32
NELSON.MLGB Lieutenant Drives: 2010 E92 JB M3 Join Date: Dec 2011 Location: Calgary,AB Posts: 429 iTrader: (1)	Pm price for oem set ship to T3K3H1

12-18-2012, 02:22 AM	#35
r53s65e90 8300 Drives: r53 s65e90 Join Date: Mar 2009 Location: San Jose, CA Posts: 417 iTrader: (0)	I still have a lot of pad material left so I am not taking part in this month's group by. Just wanted to share my experiences with Stoptech Street Performance and RS19. See attachment with front pads for comparison. Both pads used only for bedding, driving to the track and then were replaced with the stock pads. Top: Stoptech pad after 6 sessions at laguna. 6 mm of material left. Initial material is 17mm (22mm with backing plate). They are much better than stock. Bottom: Pagid RS 19 after 10 sessions at laguna. Material left 12mm. Initial material 14mm (19mm with backing plate). They feel much much better and stop harder than stoptech street performance. On the street they are quiet if they soak in plastilube. Once that has burned off at the track, they are better than a loud exhaust in attracting attention. My wife hated it, so it is ideal if you don't want you significant other to drive the car. $ per session stoptech: Price about $100. 17-6 mm in 6 sessions at a rate of 100/17 $/mm gives us $10.8 per session. $ per session rs 19: Price about $360. 14-12 mm in 10 sessions at a rate of 360/14 $/mm yields $3.8 per session. This, not considering more pad changes which is time if you DIY or time+money if you take it to a mechanic. Also not considering the fact that street pads below 4-5 mm are not suitable for anything beyond 7/10 driving. Also, you can count on a great shopping experience with Richard. Attached Images __________________ -

12-18-2012, 12:24 PM	#36
SP33DRCR Enlisted Member Drives: '09 E92 M3 Join Date: Sep 2012 Location: Bay Area, California Posts: 31 iTrader: (0)	Hey Richard, not sure if this is an ongoing offer... I just started tracking my e92 M3 a few months ago. I first got hooked up with a brand of pads called Carbotech with stock brake system. The braking performance was really great--nice feel and very effective. But wear (and heat) were major problems. I'd get one day out of a set of pads. I tried their XP-10 and XP-12 compound--and even put in ducting to help with heat. But no improvement. I picked up some Pagid RS 19s, and was able to get an entire weekend in without a wear problem--I haven't measured them yet, but they look pretty good on a visual. But they didn't feel as effective as the Carbotechs, especially in threshhold breaking situations. There was a pretty long pause before the car started to slow after I hit the brakes, and this seemed to get worse as the system heated up (towards the end of long sessions). Do the 29's perform better? I am considering upgrading to the Alcon Superkit (384mm fronts and I am not sure of the size of the rears). Can you get pads for this kit, and how much for the 19s and 29s? Thanks, Eric

12-26-2012, 05:12 AM	#38
Richard@M-World BimmerPost Supporting Vendor Drives: NASA TTA #92 M3 Join Date: May 2011 Location: TX/IL Posts: 621 iTrader: (0)	thorny, RS19, E92 OEM front and rear __________________ Authorized AiM Dealer & Data Specialist - AiM Solo \| AiM Solo DL \| AiM SmartyCam HD Authorized Pagid Brake Pads Dealer - RS19 \| RS29 \| RS14 for M3/1M OEM Calipers, StopTech, AP Racing, Alcon & Brembo w: www.m-world.us e: info@m-world.us t: 832-408-1234

01-12-2013, 03:18 AM	#39
Richard@M-World BimmerPost Supporting Vendor Drives: NASA TTA #92 M3 Join Date: May 2011 Location: TX/IL Posts: 621 iTrader: (0)	January GB is open for your orders __________________ Authorized AiM Dealer & Data Specialist - AiM Solo \| AiM Solo DL \| AiM SmartyCam HD Authorized Pagid Brake Pads Dealer - RS19 \| RS29 \| RS14 for M3/1M OEM Calipers, StopTech, AP Racing, Alcon & Brembo w: www.m-world.us e: info@m-world.us t: 832-408-1234

01-12-2013, 01:39 PM	#40
1MOREMOD Major General Drives: at a moderate pace Join Date: Mar 2009 Location: garage Posts: 6,514 iTrader: (3)	whats the price for rs-19 rear for stock calipers? can you compare with pfc 08s? __________________ 02 Tiag e46 M3\|6MT\|GC plates\|MCS c.o.\|GC race control arms\|GC bushings & bearings\|BW eng. & tran. mounts\|subframe kit\|BW race shifter\|BW Jaffster knob\|Euro header\|Eisenmann sport\|K&N c.a.i.\|Seibon CF hood\|CSL bumper\|CSL brakes\|RS19s\|SS lines\|half cage\|Recaro profi\|Profi 2 harness\|race pulleys\|BMWpedals\|Apex studs\|1995 Ford Probe gt chump car\| Last edited by 1MOREMOD; 01-12-2013 at 02:32 PM.

01-12-2013, 04:03 PM	#41
FormulaMMM Lieutenant Drives: E90 M3 Join Date: Oct 2011 Location: MI Posts: 590 iTrader: (1)	Interested in RS19 for stock rear. Have the RS29s up front with ST40 kit. Ran them most of last year -- apparently indestructible or I'm not driving fast enough. __________________ Jerez Black E90 M3: Velos Designwerks Tune, Megan Racing Catback (past) / Akrapovic Evolution (present), Macht Schnell Filter, Stoptech ST-40 Fronts + Pagid RS29, Apex EC-7 18x10 ET25 + Hankook R-S3 275/35/18.

01-12-2013, 04:30 PM	#42
leo95se First Lieutenant Drives: 09 JB e92, Q5 and passat Join Date: May 2009 Location: CT Posts: 375 iTrader: (1)	rs-19, fronts please

01-17-2013, 01:41 PM	#44
Groundpilot Lieutenant Drives: 135I DCT , e92 M3 DCT,535 I Join Date: Mar 2010 Location: long island,ny Posts: 592 iTrader: (0)	RS 19 front/rear OE Calipers please __________________ David

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search