BMW M3 Forum (E90 E92)

BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Go Back   M3Post - BMW M3 Forum > M3 (E90 / E92 / E93) > General M3 Forum (E90 + E92 + E93)
 
Evolve Automotive
Post Reply
 
Thread Tools Search this Thread
      12-10-2012, 06:42 PM   #1
GewoW
#thatsanicemovebro
 
GewoW's Avatar
 
Drives: E92 M3 LSB/Black 6MT
Join Date: Mar 2007
Location: Montreal, Canada

Posts: 3,814
iTrader: (4)

Garage List
2011 BMW M3  [4.63]
Send a message via Skype™ to GewoW
need some help diagnosing plz

hey all, so recently my car has been making a funny rubbing type sound that i can feel in the car. originally i thought it was coming from the front, but now i believe it is coming from the middle/rear. It only occurs when turning, and NOT full lock. about 1/2 way and more when turning right than left. it sounds like a rubbing sound and occasionally results in minute speed changes. it is also much more noticeable when going very slowly.

i just recently put on my winters with a 12mm spacer in the front. the sound did not start after that. it started after I had bmw change 2 of my tires (left - p.s. tires are within a few hundred km of each other, they are not mismatched), so i thought maybe it's something they did.

so since originally i thought it was coming from the front I :

-raised each front corner, freely spun wheels, sound good

-took each front tire off, spun just the rotor and looked both sides, good. no hanging detached plastic anywhere in the wheel well

-measured each front rotor (I have AP kit), maximum wear is 0.5mm on front left, which is <2mm recommended replacement

-retorqued all wheels, good

-drove around, still making the sound

-had a friend of mine sit in car with me and he brought up the idea that it's coming from the rear and after careful listening, i am of this opinion

-he thinks its the diff....which would fit with why this happens when car is turning and why its coming from rear. it makes sense. i agree

any opinions before i go to BMW?

thx all for your help


****check posts 11 and 12 for updates

Last edited by GewoW; 12-11-2012 at 10:11 PM.
GewoW is offline   Greece
0
Reply With Quote
      12-10-2012, 08:03 PM   #2
CanAutM3
Colonel
 
CanAutM3's Avatar
 
Drives: 2008 E92 M3 SS2 DCT
Join Date: Jan 2012
Location: Montreal

Posts: 2,685
iTrader: (0)

Garage List
2008 BMW M3  [0.00]
2006 Audi S4  [0.00]
What size of tire tire are you using in front?

I get light rubbing in the right wheel well with partial lock when turning right. I also have 12mm spacers in front. The spacers increase the arc traveled by the wheel when giving steering lock. In the back of the right wheel well, there is a protrusion in the fender liner, this where I get the rub.
CanAutM3 is offline   Canada
0
Reply With Quote
      12-10-2012, 08:07 PM   #3
arter
collecting toys
 
arter's Avatar
 
Drives: M3 MCB
Join Date: May 2008
Location: rochester, ny

Posts: 736
iTrader: (0)

Could try removing the spacers to see if BMW messed them up ( quick cheap check due to the timing).
__________________
2011 e92 M3 Monte Carlo Blue ESS 535
2010 Honda FIT
2006 SLK 55 AMG
arter is offline  
0
Reply With Quote
      12-10-2012, 08:13 PM   #4
GewoW
#thatsanicemovebro
 
GewoW's Avatar
 
Drives: E92 M3 LSB/Black 6MT
Join Date: Mar 2007
Location: Montreal, Canada

Posts: 3,814
iTrader: (4)

Garage List
2011 BMW M3  [4.63]
Send a message via Skype™ to GewoW
these are both non-contributing factors. checked both. and my tires also dont rub at full lock and this occurs about 1/2-3/4 the way to full lock, not at full lock

thx tho
__________________
vv Click for more pics vv

Track Vids: http://www.youtube.com/gewow
GewoW is offline   Greece
0
Reply With Quote
      12-10-2012, 08:15 PM   #5
CanAutM3
Colonel
 
CanAutM3's Avatar
 
Drives: 2008 E92 M3 SS2 DCT
Join Date: Jan 2012
Location: Montreal

Posts: 2,685
iTrader: (0)

Garage List
2008 BMW M3  [0.00]
2006 Audi S4  [0.00]
Quote:
Originally Posted by GewoW View Post
these are both non-contributing factors. checked both. and my tires also dont rub at full lock and this occurs about 1/2-3/4 the way to full lock, not at full lock

thx tho
I am not getting rub at full lock either, only partial lock.

But if you checked for rubs and did not see any, it obviously isn't your problem .
CanAutM3 is offline   Canada
0
Reply With Quote
      12-10-2012, 08:42 PM   #6
GewoW
#thatsanicemovebro
 
GewoW's Avatar
 
Drives: E92 M3 LSB/Black 6MT
Join Date: Mar 2007
Location: Montreal, Canada

Posts: 3,814
iTrader: (4)

Garage List
2011 BMW M3  [4.63]
Send a message via Skype™ to GewoW
Quote:
Originally Posted by CanAutM3 View Post
I am not getting rub at full lock either, only partial lock.

But if you checked for rubs and did not see any, it obviously isn't your problem .
interesting. tires are 245/40/18 with stock 8.5s with 12mm spacers. i will check as someone is turning the steering wheel...i did not check every single angle

thx for suggestion
__________________
vv Click for more pics vv

Track Vids: http://www.youtube.com/gewow
GewoW is offline   Greece
0
Reply With Quote
      12-11-2012, 01:10 AM   #7
Rshane
M-Flight Member
 
Rshane's Avatar
 
Drives: 2011 E92 M3
Join Date: Jul 2010
Location: Tampa, FL

Posts: 1,085
iTrader: (0)

Well, if the only thing you changed was your wheels/tires before the noise started, it is likely the cause for the noise. By raising the car and spinning the tires you are taking the weight off the suspension. So the wheels hang lower and would give you more clearance so, there would be no rubbing.

I would check the inner fender liner and look for signs of rubbing. Also, try removing the spacers and see if it goes away. If all else fails you should take the car to the dealer and see what they find.

Good luck.
__________________
2011 Le Mans Blue M3// Black extended Novillo w/ Blue Grey Aluminum trim/DCT/ZTP/ZCW/ZPP/ZCP Premium Sound ///Akrapovic Evolution Exhaust

2012 Le Mans Blue 135i M Pkg DCT
2013 Ford F150 FX4 Supercrew
Rshane is offline   United_States
0
Reply With Quote
      12-11-2012, 04:01 AM   #8
AshyLarryMP
First Lieutenant
 
Drives: 2011 MW E92 ZCP DCT
Join Date: Nov 2012
Location: San Diego

Posts: 359
iTrader: (0)

I believe your problem is rear differential clutches binding. I was experiencing a rubbing noise while turning at slow speeds. Dealer replaced clutches at 15k miles and no more noise.
AshyLarryMP is offline   United_States
0
Reply With Quote
      12-11-2012, 09:23 AM   #9
GewoW
#thatsanicemovebro
 
GewoW's Avatar
 
Drives: E92 M3 LSB/Black 6MT
Join Date: Mar 2007
Location: Montreal, Canada

Posts: 3,814
iTrader: (4)

Garage List
2011 BMW M3  [4.63]
Send a message via Skype™ to GewoW
Quote:
Originally Posted by AshyLarryMP View Post
I believe your problem is rear differential clutches binding. I was experiencing a rubbing noise while turning at slow speeds. Dealer replaced clutches at 15k miles and no more noise.
this is my thought, thanks

i will ensure no rubbing at all angles and if not, then will bring to dealer as i think this is likely it
__________________
vv Click for more pics vv

Track Vids: http://www.youtube.com/gewow
GewoW is offline   Greece
0
Reply With Quote
      12-11-2012, 04:35 PM   #10
bsiciliano
Captain
 
Drives: 2011 M3 Convertible
Join Date: Apr 2011
Location: Los Angeles

Posts: 628
iTrader: (4)

There's a service bulletin on the diff issue. Search for it. It's a simple diff fluid swap at the dealer.
__________________
2011 E93 - Space Gray - 6MT/Silver Novillo/
OE Tuning/Gruppe M Intake/ACS Springs/Vorsteiner CF Type I Rear Diffuser/Textured Matte Black Custom Powdercoated OEM 359s/Painted Reflectors/Matte Grille, Hood Vents and Side Markers/Arqray Race Exhaust/MS Pulley
bsiciliano is offline   United_States
0
Reply With Quote
      12-11-2012, 05:15 PM   #11
GewoW
#thatsanicemovebro
 
GewoW's Avatar
 
Drives: E92 M3 LSB/Black 6MT
Join Date: Mar 2007
Location: Montreal, Canada

Posts: 3,814
iTrader: (4)

Garage List
2011 BMW M3  [4.63]
Send a message via Skype™ to GewoW
*update*

so i checked if there is any rubbing with wheels mounted and weight on suspension

here are pics:

Left tire turning left




Right tire turning right - less space than the other side...maybe correlating with the increased sound I am hearing when turning right?





Do you think this is the problem? It seems like it would be to me. Also, can I keep running these tires? I am running 12mm spacer, without which I cannot clear brakes. They are completely new. I don't want to spend on 2 new front tires. Next change I will downsize to 235 fronts (245 now). never had this issue with the vredesteins wintrac though...maybe they were made narrow? These are Dunlop 3ds
__________________
vv Click for more pics vv

Track Vids: http://www.youtube.com/gewow
GewoW is offline   Greece
0
Reply With Quote
      12-11-2012, 10:08 PM   #12
GewoW
#thatsanicemovebro
 
GewoW's Avatar
 
Drives: E92 M3 LSB/Black 6MT
Join Date: Mar 2007
Location: Montreal, Canada

Posts: 3,814
iTrader: (4)

Garage List
2011 BMW M3  [4.63]
Send a message via Skype™ to GewoW
*update2*

So i don't think its the tires....I have applied some painters tape on the part with closest proximity to the tires, bilaterally. Drove around, made sure i heard the sound. Then checked them. Clear:

LEFT



RIGHT (side where tire is closest)
__________________
vv Click for more pics vv

Track Vids: http://www.youtube.com/gewow
GewoW is offline   Greece
0
Reply With Quote
      12-12-2012, 11:48 AM   #13
rawedge2
First Lieutenant
 
rawedge2's Avatar
 
Drives: 05 STI - 08 M3
Join Date: Dec 2007
Location: long island

Posts: 330
iTrader: (1)

You need to have the Diff Fluid Service Bulletin Performed as stated above.

---

I went through a similar situation after installing Springs/spacers thinking i was rubbing. I switch spacers, then realized it wasnt that and had the e-brake cable looked at thinking that could be getting caught up some how..

The way you describe it is spot on. It would sound like a moan, it would slow the cars speed when it occurs, Happenening at low speeds in a turn without the wheel at full lock..

Also it would be more prevelant while the diff fluid is cold.

Get the bulletin done, give it a few miles to work throughout the diff and you should be all fixed.
__________________
2008 E92 M3 (03-08-2008-first delivery)
JET BLACK on BLACK w/Carbon Leather, 19's, Tech, 6spd..
rawedge2 is offline  
0
Reply With Quote
      12-12-2012, 12:06 PM   #14
GewoW
#thatsanicemovebro
 
GewoW's Avatar
 
Drives: E92 M3 LSB/Black 6MT
Join Date: Mar 2007
Location: Montreal, Canada

Posts: 3,814
iTrader: (4)

Garage List
2011 BMW M3  [4.63]
Send a message via Skype™ to GewoW
will b going today. thx

here is the full service bulletin for anyone's interest:

Quote:
SI B33 01 02
Rear Axle January 2009
Technical Service

This Service Information bulletin supersedes SI B33 01 02 dated March 2008.

designates changes to this revision

SUBJECT
Grinding Noise from the Differential during Slow Cornering


MODEL
E46 M3 from start of production

E60 M5 from start of production

E63, E64 M6 from start of production

E90, E92 and E93 M3 from start of production

E85, E86 with S54 from start of production


SITUATION
A grinding noise may be heard coming from the differential during slow cornering.

This noise is best heard during tight cornering situations; for example, while parallel parking, driving in a tight circle, etc.

CAUSE
When the rear wheel speed differential varies during tight cornering, a slip stick effect is created on the lining and steel discs incorporated in the differential locking clutch, causing the grinding noise.

This noise typically goes away as the locking clutch discs in the differential are broken in.

The break-in time varies depending on driving habits; for example, tighter cornering (working the locking clutch) means that it takes less time to break in the locking clutch discs.

CORRECTION
If a customer complaint is verified as described above on the E46 M3; E60 M5; E63 and E64 M6; or on the E90, E92 and E93 M3 vehicles, the differential oil should be replaced with a specially formulated differential oil, BMW part number 83 22 2 282 583.

PROCEDURE

Drain the differential oil. Refer to the appropriate model repair instruction in TIS:

Main Group 33 / Subgroup 10 / RA 0011259.

Refill the differential with special differential oil as shown in the illustration below.

Differential fill capacity = 1.2 liters (1.3 quarts).


Remove the seal (1) between the bottle cap and neck.

Pull the filler tube (2) out of the bottle.

Remove the cap (3) from the filler tube (2).

Insert the filler tube into the fill hole in the differential and with the bottle positioned under the output shaft, squeeze the bottle to transfer the oil into the differential.

Road test the vehicle.

With the vehicle at operating temperature, drive in tight circles (20 circles in each direction), allowing the special oil to coat the locking clutch discs.

The grinding noise will decrease when the locking clutch discs are sufficiently coated. Some slight noises may still be heard after driving in tight circles. Advise the customer that it will be necessary to drive the vehicle up to 600 miles before all noises are eliminated.

Note: Vehicles that have had the differential oil converted to this special oil should continue to use this oil whenever a service requiring the differential oil replacement is indicated.

PARTS INFORMATION
Part Number
Description
Qty.

83 22 2 282 583
Special differential oil kit
1

Contains 3 bottles - .5 liters (.53 quarts) each

(order quantity 1 : bill out quantity 3)

WARRANTY INFORMATION
Covered under the terms of the BMW New Vehicle Limited Warranty.

Defect Code
33 10 92 39 00

Replace differential oil with special oil

Labor Operation:
00 53 267

Labor Allowance:
3 FRU
__________________
vv Click for more pics vv

Track Vids: http://www.youtube.com/gewow
GewoW is offline   Greece
0
Reply With Quote
      12-12-2012, 05:39 PM   #15
GewoW
#thatsanicemovebro
 
GewoW's Avatar
 
Drives: E92 M3 LSB/Black 6MT
Join Date: Mar 2007
Location: Montreal, Canada

Posts: 3,814
iTrader: (4)

Garage List
2011 BMW M3  [4.63]
Send a message via Skype™ to GewoW
was the diff oil. all fixed now
__________________
vv Click for more pics vv

Track Vids: http://www.youtube.com/gewow
GewoW is offline   Greece
0
Reply With Quote
      12-12-2012, 06:47 PM   #16
M3PO
Colonel
 
M3PO's Avatar
 
Drives: '08 IB E92
Join Date: Sep 2011
Location: OC

Posts: 2,635
iTrader: (6)

They added a friction modifier to quiet the diff. It's my understanding that it slips the clutches more and locks up more slowly.
__________________
2008 IB E92 M3| BBS | KW | Arkym | Platte Forme A.G. | Active Autowerke | K&N | Fabspeed | Dinan | Evolve-R
M3PO is offline  
0
Reply With Quote
      02-13-2013, 03:37 AM   #17
sjl104
New Member
 
Drives: E92 M3
Join Date: Feb 2013
Location: Newark, Notts

Posts: 5
iTrader: (0)

I had the same problem, 'rubbing noises' from the back end when on a tight lock at low speed. First stance from the dealership was that a modified oil was only a requirement in earlier E46s, the 90 series was ok. A couple of weeks later they changed their tack and someone looked in the right book......oil was changed to Castrol Syntrax 75w 140. No problems since.....
sjl104 is offline   United Kingdom
0
Reply With Quote
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 07:44 PM.




m3post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST