Don't judge a book by its cover. 648 RWHP M3 inside.

[img]

     Featured on BIMMERPOST.com

“Don’t judge a book by its cover” is an expression we’ve all been warned of at some point in our lives, however it may have applied. While most of us were told this at a young age, it still holds true no matter how much time passes. Those of you familiar with the E9X platform know of its naturally aspirated, high revving V8 engine making over 400 horsepower. At first glance you can tell this thing is serious. It’s lowered on RD springs with Volk TE37-SL’s and an Akrapovic exhaust. With the addition of a few little aesthetic BMW Performance pieces it’s evident that this has been modified, but it’s not until you get in the car that you know this thing means business.






It didn’t take long for Izzy to become bored with the stock power. He decided it was time to reach out to AJ and Roman of ESS Tuning to install their supercharger kit in no other color than yellow to pop off of the Interlagos Blue. Undoubtedly this was making plenty of power, but still he was not pleased. Realizing that bolt-ons had their limitations he and his friend, one of the top technicians at BMW NA – Corry Prime, brainstormed where to go next. Their solution? – build the block.





From there he began to piece together the internals needed to accomplish what he was after. That laundry list went something like this: Custom 10:01 Mahle pistons that would accommodate 18psi, custom fuel rails, Carrillo rods, GT4 water pump, motorsport rod and main bearings, and head gasket as well as custom valve springs. The heads were stress tested for cracks, cleaned and new valve seals were installed. Izzy got the block tested and honed by Dinan and all of the rotating assembly was balanced and blue printed by Michael Rouser at L&M Machine shop in Pennsylvania. Once they began assembly, which by the way was done in one weekend, they realized they needed a more efficient way to feed more fuel to this monster. They corrected the issue with custom fuel delivery system and bigger injectors.





Being that this is his daily driver, he wanted it to remain civil both inside and out. The Challenge X-pipe was modified with 4 resonators to keep a distinct and aggressive sound when he wants to open it up. The flat bottomed BMW Performance steering wheel and matching black alcantara interior trim both tie the yellow from the manifold into the car tastefully. His P3 gauge is also seamlessly integrated in the air vent as to not cause any unnecessary attention. The oem+ interior is completed with an illuminated F10 M5 shift knob.









I’m sorry, did I say civil? Last time he checked he was making 648whp, but will be going back in soon for another dyno run and is expecting more power with a few tweaks. He can keep up with the best super cars out there and fit 3 other people comfortably while doing it. If you do happen to catch Izzy on the road in Connecticut be mindful of this metaphor and don’t underestimate what his sedan can do.



http://www.facebook.com/UltimateKlasse?fref=ts
http://*******************/2012/12/islam-gohars-e90-m3/

Words & Photos by Matt Petrie

NOTE: ALL THE PARTS THAT CAME WITH THE ESS KIT IS WHAT I AM RUNING BESIDE THE BELT SYSTEM AND INJECTORS !

Car and Modifications:

• 2008 BMW M3
• ESS VT3-700 Low Compression Engine
• ESS VT3-700 Supercharger kit @ 14.00 PSI Boost
• Both CAT Delete
• Modified Challege X-Pipe with 4 resonators
• Akrapovic Slip-on Exhaust
• 93 Octane
• 6MT

Conditions:

• Temparature:: 59.31 degrees F
• Atmospheric pressure: 29.34 inHg
• Humidity: 31%
• Density Altitude: 2360 Ft.
• SAE Correction: 0.982
• STD Correction: 1.010
• Uncorrected: 1.000

Results:

• SAE Corrected: 666whp @ 8000 RPM, 439wtq @ 7700 RPM
• STD Corrected: 683whp, 450wtq
• Uncorrected: 678whp, 446wtq

Dyno Database:

• Dyno files are available from the links below.
• SAE Corrected
• STD Corrected
• Uncorrected

Individual Dyno Results:
The legend below has the following meaning:

• Dyno Run: Dyno run file
• Timestamp
• Temp(F) = Temperature (Farenheit)
• RelH = Relative Humidity
• Pressure(Hg) = Barometric Pressure
• DA(ft) = Density Altitude
• WHP(unc) = Uncorrected wheel horsepower
• WTQ(unc) = Uncorrected wheel torque
• WHP(SAEd) = SAE Corrected Horsepower using Dynojet weather station.
• WTQ(SAEd) = SAE Corrected Torque using Dynojet weather station.

Dyno Run	Timestamp	Temp(F)	RelH	Press(Hg)	DA(ft)	WHP(unc)	WTQ(unc)	WHP(SAEd)	WTQ(SAEd)
Run_022	10:51:47	59.31	32	29.34	781	659	440.8	647.2	433.2
Run_023	10:52:35	59.5	31	29.34	790	677.6	446.4	665.9	438.7

Graphs:
SAE Corrected:


HP, TQ, with IAT:


Air-Fuel-Ratio:



NOTE: AFR (Mearsured) = Dyno AFR sensors. AFR (Actual-B1), AFR (Actual-B2) are the BMW O2 sensors. There seems to be a difference between the two; a difference that is not normally seen during dyno tests. One or the other is out of calibration, and by the looks of it, the dyno AFR sniffer looks like it's out of calibration, as we can see in RunFile_023 the dyno AFR is completely wrong, but in RunFile_022 the dyno AFR matches BMW O2 sensors perfectly. Moral to the story: BMW O2 sensors are correct, but dyno RunFile_023 isn't.

STD Corrected:


Uncorrected:

[Sam@ModeCarbon]

Love at first sight.

[positiveions]

down right beautiful

[img]

Originally Posted by Sam@ModeCarbon

Love at first sight.

Originally Posted by positiveions

down right beautiful

Thanks for the kind words guys

[TimZ]

Perfect and simple outside... and pure craziness under that hood!!!
Great photo shoot Izzy!!

[e92 M3]

Beautifully and powerfully built. Izzy and Corry surely know how to create POWER. Like I tell everyone when we are at meets - Izzy is a good and bad influence. His knowledge and advice on M cars is helpful and extensive; however, if it wasn't for him, I wouldn't be supercharged, but I sure would have a lot more money in my bank account.

I've ran with Izzy's e90 and this things MOVES. This car is serious. It makes my VT625 feel like stock.

Car looks sick bro. Awesome pictures. Take care of this beauty!

[And1M3]

Wow beautifully. . I am stun for words. It is so simple and clean. It does matter what on the outside, Only what on the inside that counts. A true sleeper till the beast awakes.

[gnhm3]

Where did you get that interior trim from? Custom made?

[wisesoul]

648 WHP?!?!?! I'm speechless. I commend this build

[chuxdelux]

The alcantara interior w/ yellow stitching is the bees knees.

[///M Power-Belgium]

This car is.....WOW....and verry,verry beautiful.
THX for sharing....and also....

[Kriston]

Im in love.

[PINHEAD]

all that and no BBK?
i like the interior tho

[BMWJ]

Originally Posted by PINHEAD

all that and no BBK?
i like the interior tho

He wants to go, not stop.

[edu09]

Wow !!
Perfect all the way

[Marc@schnell]

Looks Amazing Brother!

[Team Plutonium]

Simply speechless! Izzy and Drew have the best cars, and I'm not saying best M3's... those dicks have the best. fucking. cars!

I'll be talking to you Izzy, I think I need to join that club.

Also, fuck me running and in both ears - that thing is tits!

[CSanto]

Originally Posted by PINHEAD

all that and no BBK?
i like the interior tho

Amazing Machine! +1. Tie the Yellow into a sweet BBK setup and your car is arguably the most badass sedan on the planet!

[img]

Originally Posted by TimZ

Perfect and simple outside... and pure craziness under that hood!!!
Great photo shoot Izzy!!

Originally Posted by e92 M3

Beautifully and powerfully built. Izzy and Corry surely know how to create POWER. Like I tell everyone when we are at meets - Izzy is a good and bad influence. His knowledge and advice on M cars is helpful and extensive; however, if it wasn't for him, I wouldn't be supercharged, but I sure would have a lot more money in my bank account.

I've ran with Izzy's e90 and this things MOVES. This car is serious. It makes my VT625 feel like stock.

Car looks sick bro. Awesome pictures. Take care of this beauty!

Haha,I'm always a good influence bro
XOXO

Originally Posted by And1M3

Wow beautifully. . I am stun for words. It is so simple and clean. It does matter what on the outside, Only what on the inside that counts. A true sleeper till the beast awakes.

Originally Posted by gnhm3

Where did you get that interior trim from? Custom made?

Yes,Its custom.A friend of mine did it !

Originally Posted by wisesoul

648 WHP?!?!?! I'm speechless. I commend this build

Originally Posted by chuxdelux

The alcantara interior w/ yellow stitching is the bees knees.

Originally Posted by ///M Power-Belgium

This car is.....WOW....and verry,verry beautiful.
THX for sharing....and also....

THX

Originally Posted by Kriston

Im in love.

Originally Posted by PINHEAD

all that and no BBK?
i like the interior tho

Yellow BBK is on the way

Originally Posted by BMWJ

He wants to go, not stop.

thats true,i dont really brake much.......

Originally Posted by edu09

Wow !!
Perfect all the way

THX

Originally Posted by PSIm

Looks Amazing Brother!

THX Bro !

Originally Posted by Team Plutonium

Simply speechless! Izzy and Drew have the best cars, and I'm not saying best M3's... those dicks have the best. fucking. cars!

I'll be talking to you Izzy, I think I need to join that club.

Also, fuck me running and in both ears - that thing is tits!

i love your comments Bro,haha!
Yea hit me up sometime,you need to drive this thing

Originally Posted by HREM3

Amazing Machine! +1. Tie the Yellow into a sweet BBK setup and your car is arguably the most badass sedan on the planet!

THX for the kind words,BBK is on the way

[jpirelli]

Proper sedan

[ms372]

Absolutely amazing!

[chris s]

I've seen this car, driven it (although only with a lowly VT2 at the time lol) and been in it in it's current state. It's a flat out monster... It's every bit as impressive as the pictures make it look and then some!

Props on a ridiculous build izzy... Incredible pics, well done shoot!