Perforated vs ACM OEM Exhaust Mod

biggynuts01 · 11-16-2012, 06:15 PM

I am gonna have the OEM exhaust mod done in about a week. I've read all the threads and watch all the videos. From hearing the different exhausts on videos clips it sounds like the Perforated sounds less bassy and more high pitched/raspy and the ACM sounds more droney/bassy and less raspy.

Those that have heard both, do you think the same? If so, I think the perforated sounds better. They seem equally loud.

I would like to hear your comments.

anacondatp · 11-16-2012, 06:21 PM

i'd say go ACM route. it's a bit louder and no drone from what ive seen people said so far. also, where are u getting this done at? i am also looking for a place to do this and my shop down here in SD want to charge 300.00 and it's not even stainless steel pipe

Ohh_5H1T · 11-16-2012, 06:21 PM

I've only heard the perforated fix one in videos... I have the ACM mod and as far as im concerned i sounds more throaty and a bit louder on WOT. I LOVE my ACM mod no regrets. And i speak for all other guys that have it so far. It really depends on the sound you want. I prefer a growl over a high pitch rant and this was perfect for me.

biggynuts01 · 11-16-2012, 06:26 PM

Quote:

Originally Posted by Ohh_5H1T

I've only heard the perforated fix one in videos... I have the ACM mod and as far as im concerned i sounds more throaty and a bit louder on WOT. I LOVE my ACM mod no regrets. And i speak for all other guys that have it so far. It really depends on the sound you want. I prefer a growl over a high pitch rant and this was perfect for me.

Drone issues with the ACM?

Im having it done at MRF engineering in Lake Forest, CA.

biggynuts01 · 11-16-2012, 06:28 PM

Quote:

Originally Posted by anacondatp

i'd say go ACM route. it's a bit louder and no drone from what ive seen people said so far. also, where are u getting this done at? i am also looking for a place to do this and my shop down here in SD want to charge 300.00 and it's not even stainless steel pipe

I am paying more for it. I also considered just replacing the muffler with glass packs. In fact, It would be lighter, have less bends = better flow, and much cheaper. However, I wanna keep it looking OEM.

Having it done at MRF Engineering.

Ohh_5H1T · 11-16-2012, 06:44 PM

Quote:

Originally Posted by biggynuts01

Drone issues with the ACM?

Im having it done at MRF engineering in Lake Forest, CA.

No drone whatsoever. It sounds only a little bit louder than stock from the cabin...

tom @ eas · 11-16-2012, 06:53 PM

We just installed another one today, no drone at all.

gatorfast · 11-16-2012, 07:09 PM

I did the perforated method and I love the sound. No drone whatsoever. Haven't heard the ACM method in person though to compare.

rjd598 · 11-16-2012, 07:34 PM

Quote:

Originally Posted by anacondatp

i'd say go ACM route. it's a bit louder and no drone from what ive seen people said so far. also, where are u getting this done at? i am also looking for a place to do this and my shop down here in SD want to charge 300.00 and it's not even stainless steel pipe

what shop was it? pm me i can recommend a great place for you to get it done at!

alofoque · 11-16-2012, 07:41 PM

ACM exhaust has 0 drone. I'm running AA race xpipe(Full Catless) and its still has VERY little drone inside the car. Basically ACM's method is like an eissenmann race and the perforated pipe method is the sport.

biggynuts01 · 11-16-2012, 07:46 PM

Quote:

Originally Posted by alofoque

ACM exhaust has 0 drone. I'm running AA race xpipe(Full Catless) and its still has VERY little drone inside the car. Basically ACM's method is like an eissenmann race and the perforated pipe method is the sport.

Thats great to know. I cant wait to get it done.

X2Board · 11-16-2012, 10:24 PM

Perforated, unless you like loud all the time. I drove both and the ACM method does drone a bit, so the claim of zero drone is not accurate.

Denk · 11-16-2012, 11:36 PM

Perforated.

Khrishna · 11-16-2012, 11:42 PM

+1 Perforated..

If you gonna do ACM, why not just do straight pipes and trim like 50 lbs in the process?

XR_SIX · 11-16-2012, 11:50 PM

Quote:

Originally Posted by X2Board

Perforated, unless you like loud all the time. I drove both and the ACM method does drone a bit, so the claim of zero drone is not accurate.

+1
ACM AKA Bypassing the muffler will create a "drone" sound.

m3an · 11-17-2012, 12:06 AM

Quote:

Originally Posted by XR_SIX

+1
ACM AKA Bypassing the muffler will create a "drone" sound.

I dunno, I don't think everyone gets the definition of drone as it really doesn't Its def loud but no annoying drone

m3an · 11-17-2012, 12:07 AM

Quote:

Originally Posted by Khrishna

+1 Perforated..

If you gonna do ACM, why not just do straight pipes and trim like 50 lbs in the process?

+1; save weight, save your OEM muffler and sounds identical

anacondatp · 11-17-2012, 09:22 AM

thia has been discussed bf as well. acm is kinda straight pipe but not really. bc they still take advantage if the Hemholt chamber in the stock muffler which some people believe helps eliminate the drone. again, its theory and im speaking from reading. no real experience

m3an · 11-17-2012, 10:34 AM

Quote:

Originally Posted by anacondatp

thia has been discussed bf as well. acm is kinda straight pipe but not really. bc they still take advantage if the Hemholt chamber in the stock muffler which some people believe helps eliminate the drone. again, its theory and im speaking from reading. no real experience

Yes but the chambers are now really useless as they aren't long enough for the added volume

S65NAPWR · 11-17-2012, 10:51 AM

Quote:

Originally Posted by alofoque

ACM exhaust has 0 drone. I'm running AA race xpipe(Full Catless) and its still has VERY little drone inside the car. Basically ACM's method is like an eissenmann race and the perforated pipe method is the sport.

+1

Both sound good in their own way. Neither have an annoying drone. Question is whether you want a more aggressive sound or not.

Zaw · 11-18-2012, 11:53 PM

Quote:

Originally Posted by S65NAPWR

+1

Both sound good in their own way. Neither have an annoying drone. Question is whether you want a more aggressive sound or not.

+1

I have the perforated method done to all 4 pipes. It's very nice, no drone and noticeably louder. Like most people said, stock sound when you want and louder when you get on the gas. Sometimes, I wish it was louder when I am driving with my windows up. Than again, If I had done the ACM method, I know I would wish it was less loud when I am pulling into my work parking garage or when I am out to dinner for work.

So, If you daily drive your M3 than perforated mod will make you wish it was louder sometimes and ACM mod will make you wish it was quieter sometimes.
If you don't daily drive your car, than go for the ACM mod.

If there are guys out there with ACM mod who DD their car and not wish that it was quieter sometimes, please convince me to switch to ACM mod

BPe90M3 · 11-19-2012, 12:31 AM

Quote:

Originally Posted by Zaw

+1

I have the perforated method done to all 4 pipes. It's very nice, no drone and noticeably louder. Like most people said, stock sound when you want and louder when you get on the gas. Sometimes, I wish it was louder when I am driving with my windows up. Than again, If I had done the ACM method, I know I would wish it was less loud when I am pulling into my work parking garage or when I am out to dinner for work.

So, If you daily drive your M3 than perforated mod will make you wish it was louder sometimes and ACM mod will make you wish it was quieter sometimes.
If you don't daily drive your car, than go for the ACM mod.

If there are guys out there with ACM mod who DD their car and not wish that it was quieter sometimes, please convince me to switch to ACM mod

I had it and actually ended trading for something louder lol

11-16-2012, 06:15 PM	#1
biggynuts01 Captain Drives: E92 M3 SG coupe Join Date: Feb 2012 Location: Orange County, CA Posts: 680 iTrader: (0) Garage List 2008 Porsche Cayman S [0.00] 2008 BMW E92 M3 [4.75]	Perforated vs ACM OEM Exhaust Mod I am gonna have the OEM exhaust mod done in about a week. I've read all the threads and watch all the videos. From hearing the different exhausts on videos clips it sounds like the Perforated sounds less bassy and more high pitched/raspy and the ACM sounds more droney/bassy and less raspy. Those that have heard both, do you think the same? If so, I think the perforated sounds better. They seem equally loud. I would like to hear your comments. __________________ 2008 E92 M3 SG DCT - AA Filter, JL Audio 600/6, CDT Audio, Verstraβe Paddles, ECS SS, BMW Performance Spoiler, MH race studs, BMW GTS wheels, Stoptech ST, MR Exhaust, BPM Tune, LTBMW 1M Bumper, MotoGP Lip, Euro MDM & DCT, LCI's , KW CS, TMS Soild Diff Mounts.
	Tweet

11-16-2012, 06:21 PM	#2
anacondatp Private First Class Drives: 10' E92 M3 6MT Join Date: Mar 2012 Location: SoCal Posts: 170 iTrader: (2)	i'd say go ACM route. it's a bit louder and no drone from what ive seen people said so far. also, where are u getting this done at? i am also looking for a place to do this and my shop down here in SD want to charge 300.00 and it's not even stainless steel pipe __________________ 10' E92 M3 6MT

11-16-2012, 06:21 PM	#3
Ohh_5H1T Captain Drives: Backwards Join Date: Jul 2012 Location: Yonkers, NY Posts: 714 iTrader: (0)	I've only heard the perforated fix one in videos... I have the ACM mod and as far as im concerned i sounds more throaty and a bit louder on WOT. I LOVE my ACM mod no regrets. And i speak for all other guys that have it so far. It really depends on the sound you want. I prefer a growl over a high pitch rant and this was perfect for me. __________________

11-16-2012, 06:53 PM	#7
tom @ eas BimmerPost Supporting Vendor Drives: BMW Join Date: Nov 2005 Location: Anaheim, CA Posts: 8,850 iTrader: (12) Garage List 2008 ESS VT2-525 Z4MC [0.00] 2011 ESS VT2-625 M3 [0.00]	We just installed another one today, no drone at all. __________________ Tom G. \| european auto source (eas) email: tom@europeanautosource.com web: www.europeanautosource.com tel 866.669.0705 \| ca: 714.369.8524 x22 \| fax: 714.908.1796 Blog \| Facebook \| YouTube \| Flickr \| Twitter

11-16-2012, 07:41 PM	#10
alofoque Captain Drives: AW/Fox 6MT E90 M3 Join Date: Sep 2009 Location: NYC Posts: 860 iTrader: (6)	ACM exhaust has 0 drone. I'm running AA race xpipe(Full Catless) and its still has VERY little drone inside the car. Basically ACM's method is like an eissenmann race and the perforated pipe method is the sport. __________________ E90 M3 AW/Extended FR•KW•Borla•ACM•K&N•IND•BBS•Vredestein•Velos Designworks•Vorsteiner•BMW Performance•Lux AE•Arkym

11-16-2012, 07:09 PM	#8
gatorfast Lieutenant Colonel Drives: MR E90 M3 Join Date: Jan 2008 Location: SoFla Posts: 1,808 iTrader: (3)	I did the perforated method and I love the sound. No drone whatsoever. Haven't heard the ACM method in person though to compare.

11-16-2012, 10:24 PM	#12
X2Board Late Apex Drives: His wife crazy! Join Date: Feb 2011 Location: Wake County, NC Posts: 469 iTrader: (1)	Perforated, unless you like loud all the time. I drove both and the ACM method does drone a bit, so the claim of zero drone is not accurate. __________________ 2010 Jerez Black/Black E90 DCT.

11-16-2012, 11:36 PM	#13
Denk Major Drives: 2012 e92 DCT M3 Join Date: May 2011 Location: Tigard, OR Posts: 1,090 iTrader: (0)	Perforated.

11-16-2012, 11:42 PM	#14
Khrishna Banned Drives: M3 Join Date: Nov 2012 Location: UT Posts: 76 iTrader: (0)	+1 Perforated.. If you gonna do ACM, why not just do straight pipes and trim like 50 lbs in the process?

11-17-2012, 09:22 AM	#18
anacondatp Private First Class Drives: 10' E92 M3 6MT Join Date: Mar 2012 Location: SoCal Posts: 170 iTrader: (2)	thia has been discussed bf as well. acm is kinda straight pipe but not really. bc they still take advantage if the Hemholt chamber in the stock muffler which some people believe helps eliminate the drone. again, its theory and im speaking from reading. no real experience __________________ 10' E92 M3 6MT

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search