Login
![]() |
|
![]() |
|
![]() ![]() KEEP M3POST ALIVE BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER LINK! |
Post Reply |
|
Thread Tools | Search this Thread |
11-14-2012, 12:21 PM | #1 |
is fast cars
![]() 289
Rep 2,102
Posts |
Ready for winter - thanks to hockey pucks!
Got a set of OEM 18s (gunmetal) with Conti DWS for winter from fellow member Fakebreakr a while back, and figured it was time to mount them last night.
My wife had a meeting, so she took my car and I loaded the tires (and kids) into her CX-9 to run to a gas station with free air to get them ready to mount (maybe I'll ask for a compressor for Christmas). Kids are happy in the car, watching a video, and I pull into a QuikTrip and proceed to pull all four wheels out of the back and set them up on the curb close to the air. Popped off all the valve stem caps, grabbed the hose from the air pump, and... the valve is completely missing from the hose. Sonofa... So I pile all the tires back in the car, drive to another QuikTrip, confirmed that their pump worked, and got all the tires up to pressure. Ran home, pulled out the wheels and set them out in place along with the floor jack I'd picked up from Northern Tools. Pretty fun seeing my garage laid out ready for a "pit stop". ![]() I'd picked up a couple hockey pucks (hard to find in Tulsa) and had cut one down to size and drilled a couple holes. I put the finishing touches on the adaptor while I waited for my wife to get home - sanded and scored (with a utility knife) both surfaces before applying Gorilla Glue and then sinking a couple screws: ![]() My wife got home - she was a little surprised to see my "pit" - and we got the kids in bed and I got to work. The adaptor and jack worked great, as well as the lug wrench I'd picked up (it extends for extra leverage - came in handy). Going from the polished 19s to the gunmetal 18s definitely changes the look of the car: ![]() Once I got them all changed, I took the car out for a quick drive. There's a big parking lot near me that's usually empty that I can play around in. Was impressed with the feel of the car on the 18s! Now I can see why this is the stock setup and the size of choice for track work. Felt noticeably more "tossable". I didn't think of getting the scale out to check the difference in weight - does anyone know the variance between the stock 18s and 19s (wheels and tires)? Glad to get it done. No inclement weather in the forecast yet, but it's going to be a busy couple weeks with the F1 race in Austin ![]()
__________________
Daddy's Rocket Sled! _
![]() Clarkson: "It is... pretty much perfect... Why don't I have one of these cars?" Harris: "The saloon is definitely the M3 of choice." |
11-14-2012, 12:47 PM | #2 |
First Lieutenant
![]() ![]() 22
Rep 338
Posts |
I agree, i just swapped to my 18" OEM winter wheel setup and it seems to feel more tossable than the OEM 19".
__________________
2001 M Coupe
2015 Macan Turbo 2016 Cayman GT4 |
Appreciate
0
|
11-14-2012, 01:12 PM | #4 |
Brigadier General
![]() ![]() 761
Rep 3,027
Posts |
What are your tire widths? I went from 255/275 to 245 all around for winter I and felt handling became more nimble. BTW those DWS have great grip but a terribly soft sidewall resulting in quite the lazy turn-in. I recommend slightly higher than your normal tire pressures.
|
Appreciate
0
|
11-14-2012, 02:21 PM | #5 | |
is fast cars
![]() 289
Rep 2,102
Posts |
Quote:
On the DWS, how high would you go? I'm probably at 36-37 right now, should I go up to 38-39? |
|
Appreciate
0
|
11-14-2012, 02:50 PM | #6 |
Colonel
![]() 61
Rep 2,792
Posts |
That's a great idea on the hockey pucks. I've seen them used without the "block" on top but I didn't like the idea of all of the weight being on the thin plastic edges of the jack adapter. I use a small block of wood that fits inside. It works but your idea is much better. Well done!
__________________
2008 IB E92 M3| BBS | KW | Arkym | Platte Forme A.G. | Active Autowerke | K&N | Fabspeed | Dinan | Evolve-R |
Appreciate
0
|
11-14-2012, 02:53 PM | #7 |
Brigadier General
![]() ![]() 761
Rep 3,027
Posts |
You'll have to experiment and of course it also depends on your air temps but I've done up to 38 with good results (on a VW).
|
Appreciate
0
|
11-14-2012, 02:55 PM | #8 | |
is fast cars
![]() 289
Rep 2,102
Posts |
Quote:
|
|
Appreciate
0
|
11-14-2012, 03:05 PM | #9 |
Brigadier General
![]() ![]() 172
Rep 3,594
Posts |
Did you remember to Torque the lugs to the proper lbs?
and I got myself one of these to make swapping tires easy & cuts the time in half especially at trackdays ![]()
__________________
![]() '08 E92 M3 6MT | IB | FR | RAC RG63's | VRS Ti Exhaust | Fabspeed HFC & Xpipe '09 X5 35d SG/SB '11 X3 28i AW/CN/FW (wife's car |
Appreciate
0
|
11-14-2012, 03:17 PM | #10 | |
Banned
![]() 47
Rep 8,512
Posts |
Quote:
I also use square 245/40/18 tires on OEM 18's during the winter time. I get a wheel sealant issue every year in the rear tires however from the tire stretching...I just have to be mindful to check air pressure and refill every 2 weeks. |
|
Appreciate
0
|
11-14-2012, 03:26 PM | #12 |
Banned
![]() 47
Rep 8,512
Posts |
|
Appreciate
0
|
11-14-2012, 03:31 PM | #13 | |
is fast cars
![]() 289
Rep 2,102
Posts |
Quote:
I don't yet have an impact or a torque wrench. I'm a pretty big guy (6'1",220) and I just tightened all the lugs nearly as tight as I could with my extended lug wrench - felt like similar effort related to loosing some of the tighter lugs when taking the wheels off. Should I be concerned that's not sufficient? |
|
Appreciate
0
|
11-14-2012, 04:10 PM | #14 |
Lieutenant
![]() ![]() ![]() ![]() 18
Rep 514
Posts |
I'd be concerned it is too much. Too much torque is as bad as too little. You can deform the holes on the wheel and/or cause plastic deformation and fatigue cracking of the bolts, something you won't be able to detect until your bolts begin to randomly pop off. Get a torque wrench, they're not expensive. Use a rattle gun at your own expense - their use can lead to cracked bolts as well.
Breaker bar on a 1/2" socket wrench to loosen 1/2" socket wrench to tighten when the wheel is un-weighted Torque wrench to tighten when the wheel is weighted, and after 100 miles of driving. As far as the pucks go, that's a good solution by the OP. I just use a full puck between the plastic jack point and the jack. Distributes the weight evenly about the jack point and hasn't caused any deformation of the plastic jack points. |
Appreciate
0
|
11-14-2012, 04:31 PM | #15 | |
is fast cars
![]() 289
Rep 2,102
Posts |
Quote:
What's the recommended ft-lbs? In the manual, I assume. |
|
Appreciate
0
|
11-14-2012, 11:00 PM | #18 | |
First Lieutenant
![]() ![]() 22
Rep 338
Posts |
Quote:
In terms of wheel setup, I chose to use the stock setup due to using the oem 18" wheels which are different width. I did have to use a slightly smaller tire size as they do not make the exact ones in the PA3's
__________________
2001 M Coupe
2015 Macan Turbo 2016 Cayman GT4 |
|
Appreciate
0
|
11-15-2012, 02:49 PM | #20 |
First Lieutenant
![]() ![]() 7
Rep 393
Posts |
Any issues with the puck moving around when fixed to the jack?
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|