BMW M3 Forum (E90 E92)

BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Go Back   M3Post - BMW M3 Forum > E90/E92 M3 Technical Topics > Wheels + Tires Sponsored by The Tire Rack
  TireRack

KEEP M3POST ALIVE BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER LINK!
Post Reply
 
Thread Tools Search this Thread
      10-29-2012, 05:10 PM   #1
hpc3
Second Lieutenant
hpc3's Avatar
United_States
2
Rep
253
Posts

 
Drives: '13 M3 ZCP 6sp
Join Date: May 2008
Location: Carolinas

iTrader: (0)

Is everyone in agreement that the MS and TMS 10mm spacers

fit the rear of the E92 M3 without having to modify the hub ring on the axle? Sorry for the lame question - I've searched and have emails into a couple of tuners/sources with little/no feedback. I want to go as small as possible on my ZCPs as I'll likely get a bigger tire for the rears at some point. TIA for any help.
__________________
'13 E92 M3 - SG/FR ZCP 6sp with sunroof *and* wood (old fart edition). MPE. Turner 10mm spacers x4.

Born on 07/04/12, PCD September 5th, 2012.
Appreciate 0
      10-29-2012, 05:32 PM   #2
tom @ eas
BimmerPost Supporting Vendor
tom @ eas's Avatar
United_States
326
Rep
10,621
Posts


 
Drives: BMW
Join Date: Nov 2005
Location: Anaheim, CA

iTrader: (13)

Garage List
Quote:
Originally Posted by hpc3 View Post
fit the rear of the E92 M3 without having to modify the hub ring on the axle? Sorry for the lame question - I've searched and have emails into a couple of tuners/sources with little/no feedback. I want to go as small as possible on my ZCPs as I'll likely get a bigger tire for the rears at some point. TIA for any help.
No modification is needed with the Macht Schnell spacers. You're good to go.
__________________
Appreciate 0
      10-29-2012, 07:57 PM   #3
Denk
Lieutenant Colonel
United_States
23
Rep
1,961
Posts

 
Drives: E92 M3 ZCP
Join Date: May 2011
Location: PNW

iTrader: (2)

I tried 10mm MS spacers with my 220m's. They sat flush on the hub and wheel. No issues at all. I'd expect the same for the 359's.
Appreciate 0
      10-29-2012, 08:24 PM   #4
hpc3
Second Lieutenant
hpc3's Avatar
United_States
2
Rep
253
Posts

 
Drives: '13 M3 ZCP 6sp
Join Date: May 2008
Location: Carolinas

iTrader: (0)

Tom, I'll be in touch.

Thanks to you both Tom and DenK. Appreciate the confirmation.
__________________
'13 E92 M3 - SG/FR ZCP 6sp with sunroof *and* wood (old fart edition). MPE. Turner 10mm spacers x4.

Born on 07/04/12, PCD September 5th, 2012.
Appreciate 0
      10-29-2012, 08:37 PM   #5
MStar
Banned
No_Country
2
Rep
290
Posts

 
Drives: e92 M3
Join Date: Oct 2012
Location: Here and there

iTrader: (0)

Go with the 12mm, sometimes the hub lip on your car can be greater than 10mm which cause the 10mm spacer to not sit flush with the hub

http://www.turnermotorsport.com/t-wh...yclopedia.aspx

"Most BMWs have a hub lip depth of less than 10mm. But there are a few where the lip sticks out further. Production tolerances, and even choice of brake rotor and/or hub, can also play a factor in how the spacer fits. For instance, a rotor with an aluminum hat may be thinner than a cast iron part and the thinner hat will allow more lip to protrude. Many BMW owners have run into this problem, especially with 10mm spacers. The 10mm spacers are more susceptible to this because it physically will not fit over a lip larger than itself. Most spacer manufacturers consider 10mm to be a "tuner" fitment where the shop would make the necessary changes to ensure a correct fit. If any spacer bottoms out on the lip instead of against the rotor, there are two options: buy a larger spacer, or shave/grind down the lip until it clears. Using a larger spacer is better as moving up in size is usually a small jump (the difference between 10 and 12mm is the thickness of a nickel!"
Appreciate 0
      10-30-2012, 02:23 AM   #6
paradocs98
Major
paradocs98's Avatar
United_States
31
Rep
1,347
Posts

 
Drives: 2014 991 Carrera S
Join Date: May 2009
Location: NY

iTrader: (0)

Quote:
Originally Posted by MStar View Post
Go with the 12mm, sometimes the hub lip on your car can be greater than 10mm which cause the 10mm spacer to not sit flush with the hub

http://www.turnermotorsport.com/t-wh...yclopedia.aspx

"Most BMWs have a hub lip depth of less than 10mm. But there are a few where the lip sticks out further. Production tolerances, and even choice of brake rotor and/or hub, can also play a factor in how the spacer fits. For instance, a rotor with an aluminum hat may be thinner than a cast iron part and the thinner hat will allow more lip to protrude. Many BMW owners have run into this problem, especially with 10mm spacers. The 10mm spacers are more susceptible to this because it physically will not fit over a lip larger than itself. Most spacer manufacturers consider 10mm to be a "tuner" fitment where the shop would make the necessary changes to ensure a correct fit. If any spacer bottoms out on the lip instead of against the rotor, there are two options: buy a larger spacer, or shave/grind down the lip until it clears. Using a larger spacer is better as moving up in size is usually a small jump (the difference between 10 and 12mm is the thickness of a nickel!"
Good info. I've seen this on Turner's website as well. I don't think very many people know this or appreciate it.
__________________
IB E90 M3 ZCP returned to BMW FS
Appreciate 0
      10-30-2012, 07:11 AM   #7
M3SQRD
Colonel
M3SQRD's Avatar
United_States
24
Rep
2,480
Posts

 
Drives: E92 M3s,R56 CooperS,F22 228iX
Join Date: Jun 2009
Location: EC

iTrader: (2)

I have a set of TMS 10 mm spacers and they fit properly on the F and R hubs - on both '09 and '12 M3s.
Appreciate 0
      11-11-2012, 11:25 AM   #8
hpc3
Second Lieutenant
hpc3's Avatar
United_States
2
Rep
253
Posts

 
Drives: '13 M3 ZCP 6sp
Join Date: May 2008
Location: Carolinas

iTrader: (0)

Confirmed - the Turner ones work on both the front and rears.

Quote:
Originally Posted by M3SQRD View Post
I have a set of TMS 10 mm spacers and they fit properly on the F and R hubs - on both '09 and '12 M3s.
I have a '13 model fwiw... 10mm ones are snug like a glove.
__________________
'13 E92 M3 - SG/FR ZCP 6sp with sunroof *and* wood (old fart edition). MPE. Turner 10mm spacers x4.

Born on 07/04/12, PCD September 5th, 2012.
Appreciate 0
      11-11-2012, 12:01 PM   #9
M3SQRD
Colonel
M3SQRD's Avatar
United_States
24
Rep
2,480
Posts

 
Drives: E92 M3s,R56 CooperS,F22 228iX
Join Date: Jun 2009
Location: EC

iTrader: (2)

Quote:
Originally Posted by hpc3 View Post
I have a '13 model fwiw... 10mm ones are snug like a glove.
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 07:04 PM.




m3post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST