FORUMS
- 5
![]() |
|
![]() |
| 06-29-2012, 06:38 PM | #23 |
|
Captain
![]() ![]() ![]() ![]() |
Pm please
Stock brakes, fronts and rear. Shipping to Canada. B3h1s2 Thx
__________________
11' e92 M3 - current
![]() 10' S1000RR - miss it every day 08' e93 335 - new owner 07' e91 328xi - new owner 06' e90 330xi - new owner |
![]() |
|
| 07-14-2012, 06:46 PM | #24 |
|
rev limiter abuser
|
any issues with the ds2500 being to aggressive for street tires? I want to run these on all corners on the track with pilot SS.
__________________
Showing or promising no abatement of severity, intensity, strength, or pace.
|
![]() |
|
| 07-15-2012, 03:33 AM | #25 |
|
BimmerPost Supporting Vendor
![]() Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007
Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag,
Posts: 10,050
iTrader: (26)
|
No, not at all. These pads are suitable for street and light track day use on street tires. With R-comp or slicks you will likely find more aggressive or race pads are needed.
|
![]() |
|
| 10-01-2012, 02:22 PM | #29 |
|
Major General
![]() ![]() |
fronts are 159 and rears are 155. pretty reasonable. i use em for daily use and winter track days.
__________________
![]() 02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC race control arms|GC bushings & bearings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster knob|Euro header|Eisenmann sport|K&N c.a.i.|Seibon CF hood|CSL bumper|CSL brakes|RS19s|SS lines|half cage|Recaro profi|Profi 2 harness|race pulleys|BMWpedals|Apex studs|1995 Ford Probe gt chump car| |
![]() |
|
| 12-09-2012, 06:14 PM | #33 |
|
Major General
![]() ![]() |
I've ran 3 sets thru the fronts on OEM rotors and they don't cause too much wear. Lot better than my pagids.
__________________
![]() 02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC race control arms|GC bushings & bearings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster knob|Euro header|Eisenmann sport|K&N c.a.i.|Seibon CF hood|CSL bumper|CSL brakes|RS19s|SS lines|half cage|Recaro profi|Profi 2 harness|race pulleys|BMWpedals|Apex studs|1995 Ford Probe gt chump car| |
![]() |
|
| 12-09-2012, 06:27 PM | #34 |
|
Lieutenant
![]() ![]() ![]() |
|
|
|
|
| 12-09-2012, 09:39 PM | #35 |
|
Major General
![]() ![]() |
no problem just put a new set on yesterday. i feel like they work almost as well as my rs19s just dont last very long. get 2-3 days out of the fronts.
__________________
![]() 02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC race control arms|GC bushings & bearings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster knob|Euro header|Eisenmann sport|K&N c.a.i.|Seibon CF hood|CSL bumper|CSL brakes|RS19s|SS lines|half cage|Recaro profi|Profi 2 harness|race pulleys|BMWpedals|Apex studs|1995 Ford Probe gt chump car| |
![]() |
|
| 12-18-2012, 01:10 PM | #36 |
|
BimmerPost Supporting Vendor
![]() Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007
Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag,
Posts: 10,050
iTrader: (26)
|
Ferodo DS2500 clubsport/HPDE brake pads
We just receive our stocking order of 5 more sets of these so order away!
|
![]() |
|
![]() |
| Bookmarks |
| Thread Tools | Search this Thread |
|
|