Brembo GT 380 - Pistion

Anthony555 · 10-06-2012, 11:20 PM

Just purchased and had installed the following

Brembo GT kit on my 2008 BMW M3.

Part numbers 1N1 9003A2 R / 1N1 9003A2 L

I couldn't find a post that verified that they fit my Stock rims. Some posts hinted that they were very tight.

So here is my experience.

1) YES they do fit. See picture.
2) BMW shop installed and said everything was fine for clearance.
3) I observed approximately 1/4 inch of clearance around the rim (19")

And for more detail...

They are awesome!

THE TECH · 10-07-2012, 10:44 AM

Looks good.

spdy330 · 10-07-2012, 10:45 AM

Picture does not work

Anthony555 · 10-09-2012, 01:26 AM

Updated the pictures! Enjoy.

BMRLVR · 10-09-2012, 05:33 AM

Looks GREAT!!!

I have to say, out of all my mods, my brembo 380 kit is the best addition to my M3 from both a performance and an aesthetic standpoint.

Andy_H_E92_M3 · 10-09-2012, 11:38 AM

Wow. That's clean.

ussoldierforhire · 10-09-2012, 11:43 AM

Drooool

BMW Fanatic · 10-09-2012, 12:14 PM

MR + Red BBK = WIN

BimmerRob08 · 10-09-2012, 10:27 PM

Very nice! Might be my next option if I can't get my vibration problem resolved with my BBK.

dagolfpro · 10-10-2012, 12:19 AM

Too bad this wont fit on OEM 18". Gorgeous!!!!

tbone28 · 10-10-2012, 12:25 AM

Purdy. Your post is timely. I just picked up a 220m tonight...so glad it clears the 380

bape_sta206 · 10-10-2012, 04:02 PM

beautiful! I can't wait to get my hands on some.

jonasaurus · 10-10-2012, 04:20 PM

Amazing.. looks great

Pads?

GregorK · 10-25-2012, 04:04 AM

that I understand it correct: brembo 380mm kit clears the M220 wheels (front: 8.5 x 19, offset 29mm; rear: 9.5 x 19, offset 23mm) without any issues? No spacers necessary?

thank you
Gregor

10-06-2012, 11:20 PM	#1
Anthony555 New Member Drives: 2008 BMW M3 Join Date: Nov 2011 Location: Canada Posts: 5 iTrader: (0)	Brembo GT 380 - Pistion Just purchased and had installed the following Brembo GT kit on my 2008 BMW M3. Part numbers 1N1 9003A2 R / 1N1 9003A2 L I couldn't find a post that verified that they fit my Stock rims. Some posts hinted that they were very tight. So here is my experience. 1) YES they do fit. See picture. 2) BMW shop installed and said everything was fine for clearance. 3) I observed approximately 1/4 inch of clearance around the rim (19") And for more detail... They are awesome! Last edited by Anthony555; 10-09-2012 at 01:26 AM. Reason: Photo Link is still f-ed up.
	Tweet

10-07-2012, 10:44 AM	#2
THE TECH BimmerPost Supporting Vendor Drives: BPMsport 2012 E92 M3 Join Date: Jun 2011 Location: Kansas Posts: 11,884 iTrader: (39)	Looks good. __________________ Check us out on Facebook at BPMsportLabs

10-07-2012, 10:45 AM	#3
spdy330 Major General Drives: 05 Tundra, 11 M3, 08 Odyssey Join Date: Dec 2009 Location: SoCal Posts: 5,490 iTrader: (136) Garage List 2011.75 BMW M3 [4.40] 2006 BMW 330i - SOLD [5.00]	Picture does not work __________________ - 2006 E90 330i TiAG retired. - 2011.75 E90 M3 - BMW Performance Exhaust, BMW Performance Grills, Lux H8 V3, IND Reflectors, Ceramic Tint 58%, Brembo 380mm BBK, V1 with custom multi-color display by www.Radar-Mirror.com - custom radar mount by www.performancepackage.com.

10-09-2012, 05:33 AM	#5
BMRLVR Grease Monkey Drives: 2011 E90 M3,1994 Euro E36 M3/4 Join Date: Apr 2006 Location: Fort McMurray, Alberta, Canada Posts: 2,009 iTrader: (3)	Looks GREAT!!! I have to say, out of all my mods, my brembo 380 kit is the best addition to my M3 from both a performance and an aesthetic standpoint. __________________ 2011 E90 M3 ZCP - Individual Moonstone/Individual Amarone Extended/Individual Piano Black With Inlay:LINK!!! 1994 Euro E36 M3 Sedan - Daytona Violet/Mulberry:LINK!!!

10-09-2012, 12:14 PM	#8
BMW Fanatic Colonel Drives: slow Join Date: Jul 2009 Location: Calgary Posts: 2,871 iTrader: (9)	MR + Red BBK = WIN __________________ Arkym Hood CF, VMR 710 10F 11R, 265/295, OEM Performance Spoiler, Challenge Lip GB, H&R, iND CP, 5/15% tint, MS Air Scoops in Mexico Blue, more coming soon.

10-09-2012, 01:26 AM	#4
Anthony555 New Member Drives: 2008 BMW M3 Join Date: Nov 2011 Location: Canada Posts: 5 iTrader: (0)	Updated the pictures! Enjoy.

10-09-2012, 11:38 AM	#6
Andy_H_E92_M3 Private Drives: 2008 E92 ///M3 Join Date: Dec 2011 Location: NC Posts: 59 iTrader: (0)	Wow. That's clean.

10-09-2012, 11:43 AM	#7
ussoldierforhire Lieutenant Drives: 2011 M3 E92 Join Date: Apr 2011 Location: Virginia Beach, VA Posts: 552 iTrader: (1)	Drooool

10-09-2012, 10:27 PM	#9
BimmerRob08 Major Drives: 2008 M3, Space Gray Join Date: Mar 2008 Location: KIKR (ABQ), NM Posts: 1,144 iTrader: (0)	Very nice! Might be my next option if I can't get my vibration problem resolved with my BBK.

10-10-2012, 12:19 AM	#10
dagolfpro Major Drives: 2011 E90 M3 Join Date: Sep 2011 Location: Union City, CA Posts: 1,166 iTrader: (4)	Too bad this wont fit on OEM 18". Gorgeous!!!! __________________ 2011 E90 AW \| DCT \| ZCP \| ZCV \| ZCW \| ZP2 \| Prem Sound \| Moonroof \| BMW Apps \| ACM Exhaust Mod \| M Perf Steering Wheel \| Tint \| Lux \| Painted Reflectors \| Hardwired V1 \| KW V3 \| Volshlag CP \| Brembo BBK \| 18" Volks TE37SL Pressed Graphite \| Yokohama AD08 \| Schroth 4 Point Harness \| I swear I'm done, no more mods...

10-10-2012, 12:25 AM	#11
tbone28 vvvvvvvvvvvvvv Drives: ^^^^^ Join Date: May 2012 Location: Bay Area, CA Posts: 1,274 iTrader: (10)	Purdy. Your post is timely. I just picked up a 220m tonight...so glad it clears the 380

10-10-2012, 04:02 PM	#12
bape_sta206 tha_good_life Drives: 2010 JzB E92 M3 Join Date: Jul 2008 Location: Seattle Posts: 3,562 iTrader: (14) Garage List 2010 BMW M3 [4.27]	beautiful! I can't wait to get my hands on some.

10-10-2012, 04:20 PM	#13
jonasaurus Colonel Drives: 11.5 E90 M3 Join Date: Oct 2010 Location: London Posts: 2,777 iTrader: (0)	Amazing.. looks great Pads? __________________ ///M3 \| E90 \| Space Grey \| Fox Red with CF Structure \| 6MT \| 260M \| My build

10-25-2012, 04:04 AM	#14
GregorK Registered Drives: M3 E92 Join Date: Oct 2012 Location: Germany Posts: 1 iTrader: (0)	just to make sure that I understand it correct: brembo 380mm kit clears the M220 wheels (front: 8.5 x 19, offset 29mm; rear: 9.5 x 19, offset 23mm) without any issues? No spacers necessary? thank you Gregor

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search