iND

Ryan@IND · 10-09-2012, 02:28 PM

Retain your factory secondary catalysts all the while removing the largest restriction in your exhaust. The factory primary catalyst on the E9X M3 consist of a massive 400 cell unit. Installation of the Macht Schnell piece is installed via two incisions after the primary catalyst and the unit is then secured with the provided clamps. Professional installation is recommended.

Bypass Track Pipe Features:

Full Stainless Steel Construction, with mandrel bends for optimum flow
Straight shot design for zero restriction and high velocity
Gains as high as 20hp/20lb-ft TQ with no aftermarket software
Retains OEM O2 locations
Retains use of OEM crush gaskets

A tune is required to remove the check engine light. IND offers a couple solutions that can be purchased as a package with the Macht Schnell Bypass Track Pipe.

Macht Schnell Bypass Track Pipe MSRP $495.00

M3post Package 1:

MS Track pipe w/ESS Direct Flash - $1440.00 shipped

M3post Package 2:

MS Track Pipe w/Akrapovic DeleteR - $850.00 shipped

Contact a IND Representative for more information

Phone: 866.963.4520 (847.963.4520 local)
Email: info@ind-distribution.com

flipm3 · 10-09-2012, 05:13 PM

Awesome deal!! Great to see primary cat delete pipes back on the market!!

Any special packages for MS Pulleys, Stage 2 Intake, and Track Pipes?

m3an · 10-09-2012, 05:18 PM

is 500$ really a deal for a set of two pipes/

Fuck im in the wrong business

urBan_dK · 10-09-2012, 07:25 PM

TMS Pipes were 400...

MikeE92M3 · 10-09-2012, 09:14 PM

Priced too high. Seriously, $400 was kind of pushing it for TMS, but now that this is supposedly the "only" manufacturer to make these, the price has to be 500? Youve lost a sale.

m3an · 10-09-2012, 09:17 PM

Quote:

Originally Posted by MikeE92M3

Priced too high. Seriously, $400 was kind of pushing it for TMS, but now that this is supposedly the "only" manufacturer to make these, the price has to be 500? Youve lost a sale.

Exactly. Too tired of others thinking the m tax on parts is ok. All parts for these cars are wayyyyyyyyy overpriced

MikeE92M3 · 10-09-2012, 09:20 PM

Quote:

Originally Posted by m3an

Exactly. Too tired of others thinking the m tax on parts is ok. All parts for these cars are wayyyyyyyyy overpriced

It's getting really old and quite frankly pisses me off. They are no different than the test pipes I had on my Nismo Z and I paid $200 for them. Even better, they were resonated test pipes. Poop on everyone else.

Ohh_5H1T · 10-09-2012, 09:24 PM

Quote:

Originally Posted by m3an

is 500$ really a deal for a set of two pipes/

Fuck im in the wrong business

LMFAO

MikeE92M3 · 10-09-2012, 09:24 PM

IND, If you can do a group buy that can knock off 20% or more off the final cost, then maybe we can talk..

kaiv · 10-10-2012, 01:37 AM

Quote:

Originally Posted by flipm3

Any special packages for MS Pulleys, Stage 2 Intake, and Track Pipes?

Now that's a brilliant idea ahah

RuthlessE90 · 10-10-2012, 10:13 AM

$500 Come on man WTF?!?!?!?!?

Ryan@IND · 10-10-2012, 10:33 AM

Quote:

Originally Posted by flipm3

Awesome deal!! Great to see primary cat delete pipes back on the market!!

Any special packages for MS Pulleys, Stage 2 Intake, and Track Pipes?

PM sent

rjd598 · 10-10-2012, 10:49 AM

Man and to think I thought this was a deal...

dmk08 · 10-10-2012, 12:09 PM

Quote:

Originally Posted by flipm3

Awesome deal!! Great to see primary cat delete pipes back on the market!!

Any special packages for MS Pulleys, Stage 2 Intake, and Track Pipes?

How about for MS Pulleys, Tune, and Test Pipes?

Would I just be able to clamp the cats back on for street/emissions purposes?

Super Sic · 10-10-2012, 12:59 PM

Quote:

Originally Posted by dmk08

How about for MS Pulleys, Tune, and Test Pipes?

Would I just be able to clamp the cats back on for street/emissions purposes?

I asked the same question - the cats need to be welded back on (clamps won't work).

kawasaki00 · 10-10-2012, 02:40 PM

Quote:

Originally Posted by Super Sic

I asked the same question - the cats need to be welded back on (clamps won't work).

They do not need to be welded back on, just get some different clamps, the make some for od/od clamping.

Super Sic · 10-10-2012, 03:53 PM

Quote:

Originally Posted by kawasaki00

They do not need to be welded back on, just get some different clamps, the make some for od/od clamping.

That's contrary to what IND told me last night via PM. However, I hope this is true as it makes the test pipes that much more attractive!

CarbonFoot · 10-10-2012, 07:08 PM

Quote:

Originally Posted by kawasaki00

They do not need to be welded back on, just get some different clamps, the make some for od/od clamping.

Don't think this is possible due to how close the cut needs to be made to the cats. There won’t be enough straight tube length left to clamp onto properly. You might be able to make it work with a jenky narrow clamp, but be prepared for the ensuing leaks.

rocket_science · 12-28-2012, 11:34 AM

Please PM price for pipes only to 33912. Thanks!

Nate@IND · 09-04-2013, 11:41 AM

Track pipes are in stock now.

Quote:

Originally Posted by rocket_science

Please PM price for pipes only to 33912. Thanks!

Let me know if a pm was sent over.

10-09-2012, 02:28 PM	#1
Ryan@IND BimmerPost Supporting Vendor 1053 Rep 7,368 Posts Drives: ACR Join Date: Mar 2008 Location: Chicago iTrader: (18)	iND \| Macht Schnell Track Pipes Retain your factory secondary catalysts all the while removing the largest restriction in your exhaust. The factory primary catalyst on the E9X M3 consist of a massive 400 cell unit. Installation of the Macht Schnell piece is installed via two incisions after the primary catalyst and the unit is then secured with the provided clamps. Professional installation is recommended. Bypass Track Pipe Features: Full Stainless Steel Construction, with mandrel bends for optimum flow Straight shot design for zero restriction and high velocity Gains as high as 20hp/20lb-ft TQ with no aftermarket software Retains OEM O2 locations Retains use of OEM crush gaskets A tune is required to remove the check engine light. IND offers a couple solutions that can be purchased as a package with the Macht Schnell Bypass Track Pipe. Macht Schnell Bypass Track Pipe MSRP $495.00 M3post Package 1: MS Track pipe w/ESS Direct Flash - $1440.00 shipped M3post Package 2: MS Track Pipe w/Akrapovic DeleteR - $850.00 shipped Contact a IND Representative for more information Phone: 866.963.4520 (847.963.4520 local) Email: info@ind-distribution.com __________________ IND DISTRIBUTION \| 866-963-4520 • FACEBOOK • INSTAGRAM • FLICKR Last edited by Ryan@IND; 10-09-2012 at 02:37 PM.
	Appreciate 0 Tweet Quote

10-09-2012, 05:13 PM	#2
flipm3 E46 + E90 75 Rep 2,800 Posts Drives: E46 M3 + E90 M3 Join Date: Jul 2008 Location: Illinois iTrader: (1) Garage List 2009 BMW M3 [0.00] 2002 BMW M3 [0.00]	Awesome deal!! Great to see primary cat delete pipes back on the market!! Any special packages for MS Pulleys, Stage 2 Intake, and Track Pipes? __________________ E90 M3 DCT\|Melbourne Red . Speed Cloth \| My Build Thread E46 M3 6MT\|Jet Black . Black Nappa Leather \| My Build Thread
	Appreciate 0 Quote

10-09-2012, 05:18 PM	#3
m3an Banned -89 Rep 1,609 Posts Drives: M3 Join Date: Oct 2010 Location: South Florida iTrader: (2)	is 500$ really a deal for a set of two pipes/ Fuck im in the wrong business
	Appreciate 0 Quote

10-09-2012, 07:25 PM	#4
urBan_dK First Lieutenant 12 Rep 395 Posts Drives: 2008 E90 M3 Join Date: Jan 2012 Location: Mill Creek, WA iTrader: (3) Garage List 2013 Subaru WRX [5.00] 2000 Aprilia RSV Mi ... [5.00] 2008 BMW E90 M3 [5.00] 2005 Honda S2000 [5.00]	TMS Pipes were 400...
	Appreciate 0 Quote

10-09-2012, 09:14 PM	#5
MikeE92M3 Captain 26 Rep 623 Posts Drives: 08 E92 M3 Join Date: May 2012 Location: Richmond, VA iTrader: (5)	Priced too high. Seriously, $400 was kind of pushing it for TMS, but now that this is supposedly the "only" manufacturer to make these, the price has to be 500? Youve lost a sale. __________________ 2008 (07/08) E92 M3 BPM Stage II Tuned by Mike Benvo, 6MT, Turner Test Pipes, Magnaflow Custom Catback Exhaust (Magnaflow X Pipe, secondary cat delete, Aero Resonators and Helmholtz Chambers),Vorsteiner CF Lip, Hamann Style CF rear diffuser, CF Rear Decklid Spoiler, BMW Performance Kidney Grills, CF Side Grills, OEM GTS Wheels, K&N Drop-In Filter, GP Thunder 8k Angel Eyes, Painted Reflectors.
	Appreciate 0 Quote

10-09-2012, 09:24 PM	#9
MikeE92M3 Captain 26 Rep 623 Posts Drives: 08 E92 M3 Join Date: May 2012 Location: Richmond, VA iTrader: (5)	IND, If you can do a group buy that can knock off 20% or more off the final cost, then maybe we can talk.. __________________ 2008 (07/08) E92 M3 BPM Stage II Tuned by Mike Benvo, 6MT, Turner Test Pipes, Magnaflow Custom Catback Exhaust (Magnaflow X Pipe, secondary cat delete, Aero Resonators and Helmholtz Chambers),Vorsteiner CF Lip, Hamann Style CF rear diffuser, CF Rear Decklid Spoiler, BMW Performance Kidney Grills, CF Side Grills, OEM GTS Wheels, K&N Drop-In Filter, GP Thunder 8k Angel Eyes, Painted Reflectors.
	Appreciate 0 Quote

10-10-2012, 10:13 AM	#11
RuthlessE90 First Lieutenant 19 Rep 323 Posts Drives: FAST Join Date: Mar 2011 Location: NYC iTrader: (5)	$500 Come on man WTF?!?!?!?!?
	Appreciate 0 Quote

10-10-2012, 10:49 AM	#13
rjd598 Major General 492 Rep 6,051 Posts Drives: E90 M3/ F30 328i Join Date: Jan 2009 Location: San Diego,CA iTrader: (2) Garage List 2016 BMW 328i [0.00] 2010 BMW M3 [4.50]	Man and to think I thought this was a deal... __________________
	Appreciate 0 Quote

12-28-2012, 11:34 AM	#19
rocket_science 424 ASP 50 Rep 236 Posts Drives: '11 AW E92 M3 ZCP Join Date: Apr 2011 Location: Fort Myers, FL / Pittsburgh, PA iTrader: (6)	Please PM price for pipes only to 33912. Thanks!
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search