BMW Performance Electronic Steering Wheel V2

jjw2331 · 09-20-2012, 02:16 AM

I finally pulled the trigger on a BMW Performance Steering Wheel (electronic version).

The installation went smoothly, and I can't thank doba_s enough for the DIY found here http://www.m3post.com/forums/showthread.php?t=242963

If you are planning on installing the wheel yourself, power the wheel using the CAS module under the driver side dash. DO NOT use the cigarette lighter power source. It won't remember any of your settings. Follow this thread for the install manual and right way to power the wheel.

http://www.m3post.com/forums/showthr...bd2+port+power

Thanks to Jon@bmwpartspros.com! As we all know on these forums, Steve Thomas BMW's customer service is no joke. Jon and the Steve Thomas team are the best!

A little video I made trying out the new wheel.

Lagunae92 · 09-20-2012, 02:52 AM

Can you change the shift light rpm settings and retain the change while having the lights work still?

jjw2331 · 09-20-2012, 02:57 AM

Quote:

Originally Posted by Lagunae92

Can you change the shift light rpm settings and retain the change while having the lights work still?

Yup. There is a shift lights setting page in the settings menu that allows you to change the rpm(100 rpm increments) for the shift lights. So they can go off at 1000rpm if you'd like, or you can change it to 2700rpm, 8100rpm etc.

Lagunae92 · 09-20-2012, 03:01 AM

My wheel defaults at 4000 at every startup. I ha it wired a different way where settings would store, but shift lights would not register the rpms or light up. When everything did work, it only lasted an hour or so, then stopped working. It is now wired as per the instructions, but settings do not hold.

jjw2331 · 09-20-2012, 03:09 AM

Quote:

Originally Posted by Lagunae92

My wheel defaults at 4000 at every startup. I ha it wired a different way where settings would store, but shift lights would not register the rpms or light up. When everything did work, it only lasted an hour or so, then stopped working. It is now wired as per the instructions, but settings do not hold.

Do you know where the wheel is getting its power? I ask because there are two different manuals and four ways this wheel has been connected amongst the members on this forum.

Lagunae92 · 09-20-2012, 03:26 AM

However BMWs techs are told to do it. I've tried a few other options, including directly from the battery. Are you from the CAS unit?

Lagunae92 · 09-20-2012, 03:27 AM

I assume I am from the lighter as per BMW instructions.

jjw2331 · 09-20-2012, 03:40 AM

Quote:

Originally Posted by Lagunae92

However BMWs techs are told to do it. I've tried a few other options, including directly from the battery. Are you from the CAS unit?

That's correct. The CAS unit has a constant power source so that you do not lose any settings. This is per the instructions from bmw for the v2 wheel. The previous generation wheel tapped into the obd2 port power source. A power source no one has able to find in the M3.

In your case, the shift light settings might be reset from a power interruption. People have noticed that tapping into the cigarette power source only allows for 30 min to an hour before the settings are lost. That is with the car off though. If you are losing the settings while driving for an hour, then perhaps there might be drop in voltage somewhere.

I would make sure that your dealer connected the power wires to the CAS unit. You can check by removing the driver side panel underneath the steering wheel and looking up at the CAS unit. Two wires should be tapped into the bundle of wires connected to the unit. However, since your dealer did the install, it might be best to have them take a look and recheck their work.

But if wired correctly the settings should save every time you turn off and start the car.

THE TECH · 09-20-2012, 08:44 AM

Congrats. I love my wheel.

jjw2331 · 09-20-2012, 03:16 PM

Quote:

Originally Posted by THE TECH

Congrats. I love my wheel.

Thanks TECH! You have been quite helpful in the threads relating to this wheel

.

BimmerRob08 · 09-20-2012, 03:16 PM

Can the light intensity of the shift lights be adjusted down? Maybe its due to the video but looks like at night it would be pretty bright and a distraction more so than a good situation builder?? Can the lights be adjusted along with the rest of the consul light settings then?

jjw2331 · 09-20-2012, 03:19 PM

Quote:

Originally Posted by BimmerRob08

Can the light intensity of the shift lights be adjusted down? Maybe its due to the video but looks like at night it would be pretty bright and a distraction more so than a good situation builder?? Can the lights be adjusted along with the rest of the consul light settings then?

I don't think it can be adjusted. I havent gone through the manual extensively yet. The lights are not any brighter than my dash, so it hasn't been distracting at all. You can leave the wheel off too.

THE TECH · 09-20-2012, 03:21 PM

Quote:

Originally Posted by jjw2331

Thanks TECH! You have been quite helpful in the threads relating to this wheel

.

Glad I could help!

THE TECH · 09-20-2012, 03:22 PM

Quote:

Originally Posted by jjw2331

I don't think it can be adjusted. I havent gone through the manual extensively yet. The lights are not any brighter than my dash, so it hasn't been distracting at all. You can leave the wheel off too.

Agreed.

warp10 · 09-20-2012, 03:29 PM

This might be slightly off topic but people that were having problems getting the shift light to work, setting kept but no rpm reading, were making a reset button by powering the wheel through the fuse box can someone explains the process for this?

PARTS@STBMW · 09-20-2012, 04:38 PM

Awesome job with the install and the video! Looks great!

jjw2331 · 09-20-2012, 06:15 PM

Quote:

Originally Posted by warp10

This might be slightly off topic but people that were having problems getting the shift light to work, setting kept but no rpm reading, were making a reset button by powering the wheel through the fuse box can someone explains the process for this?

From what I know, that was an issue with the DCT M3's. I met a member who had the problem you stated and made a switch to reset the wheel. He got it to work without the switch but never told me how.

The electronic wheel has a steptronic version with paddles, however, it never states it being compatible for DCT. Many members have gotten it to work though. They should be able to help you with that.

6MT cars should not have this issue.

Lagunae92 · 09-20-2012, 08:17 PM

You can adjust brightness if shift lights and screen.

jjw2331 · 09-20-2012, 11:09 PM

Quote:

Originally Posted by PARTS@STBMW

Awesome job with the install and the video! Looks great!

Thanks for all your help Jon!

jjw2331 · 09-20-2012, 11:10 PM

Quote:

Originally Posted by Lagunae92

You can adjust brightness if shift lights and screen.

Nice! Thanks for pointing that out. I got to try that later.

BIGW0RM · 09-21-2012, 01:05 AM

Looks good OP. Nice video too. Thanks for putting that together.

BMW would be killing it if they made it look like V1 but in full leather with all the bells and horns of V2.

IntegraXTR · 09-25-2012, 01:59 AM

Nice! I love mine and mine has been working since day one (cept my constant power is via the JBE module)..

Also, if you recode your car to have Efficient Dynamics, the led light blinks green to tell you to shift =)

Lots of features and easy install ftw!

09-20-2012, 02:16 AM	#1
jjw2331 First Lieutenant 38 Rep 375 Posts Drives: 2011 JtBlk e92 M3 Join Date: Sep 2008 Location: Michigan iTrader: (6)	BMW Performance Electronic Steering Wheel V2 - Pic and Video I finally pulled the trigger on a BMW Performance Steering Wheel (electronic version). The installation went smoothly, and I can't thank doba_s enough for the DIY found here http://www.m3post.com/forums/showthread.php?t=242963 If you are planning on installing the wheel yourself, power the wheel using the CAS module under the driver side dash. DO NOT use the cigarette lighter power source. It won't remember any of your settings. Follow this thread for the install manual and right way to power the wheel. http://www.m3post.com/forums/showthr...bd2+port+power Thanks to Jon@bmwpartspros.com! As we all know on these forums, Steve Thomas BMW's customer service is no joke. Jon and the Steve Thomas team are the best! A little video I made trying out the new wheel.
	Appreciate 0 Tweet Quote

09-20-2012, 02:52 AM	#2
Lagunae92 Captain 53 Rep 754 Posts Drives: BMW e92 M3 Laguna Seca Blue Join Date: Jul 2009 Location: Long Beach iTrader: (0)	Can you change the shift light rpm settings and retain the change while having the lights work still? __________________ 2009 e92 M3 Individual Laguna Seca Blue\|Black Novillo\|DCT\|19"rims\|Carbon Leather\|Premium\|Tech.\|Heated Seats\|Prem. Sound\|iPod\| Mods: \|Electronic Performance Steering Wheel\|ZCP CF Spoiler\|ZCP CF Spliters\|ZCP CF Mirrors\|Edition Front Grilles\|Edition Side Grilles\|BMW Performance Brake Handle\|3D Design Pedals\| Style Rumore Exhaust\|H&R Springs\|LCI Tails\|Challenge CF Door Panels\|
	Appreciate 0 Quote

09-20-2012, 03:01 AM	#4
Lagunae92 Captain 53 Rep 754 Posts Drives: BMW e92 M3 Laguna Seca Blue Join Date: Jul 2009 Location: Long Beach iTrader: (0)	My wheel defaults at 4000 at every startup. I ha it wired a different way where settings would store, but shift lights would not register the rpms or light up. When everything did work, it only lasted an hour or so, then stopped working. It is now wired as per the instructions, but settings do not hold. __________________ 2009 e92 M3 Individual Laguna Seca Blue\|Black Novillo\|DCT\|19"rims\|Carbon Leather\|Premium\|Tech.\|Heated Seats\|Prem. Sound\|iPod\| Mods: \|Electronic Performance Steering Wheel\|ZCP CF Spoiler\|ZCP CF Spliters\|ZCP CF Mirrors\|Edition Front Grilles\|Edition Side Grilles\|BMW Performance Brake Handle\|3D Design Pedals\| Style Rumore Exhaust\|H&R Springs\|LCI Tails\|Challenge CF Door Panels\|
	Appreciate 0 Quote

09-20-2012, 03:26 AM	#6
Lagunae92 Captain 53 Rep 754 Posts Drives: BMW e92 M3 Laguna Seca Blue Join Date: Jul 2009 Location: Long Beach iTrader: (0)	However BMWs techs are told to do it. I've tried a few other options, including directly from the battery. Are you from the CAS unit? __________________ 2009 e92 M3 Individual Laguna Seca Blue\|Black Novillo\|DCT\|19"rims\|Carbon Leather\|Premium\|Tech.\|Heated Seats\|Prem. Sound\|iPod\| Mods: \|Electronic Performance Steering Wheel\|ZCP CF Spoiler\|ZCP CF Spliters\|ZCP CF Mirrors\|Edition Front Grilles\|Edition Side Grilles\|BMW Performance Brake Handle\|3D Design Pedals\| Style Rumore Exhaust\|H&R Springs\|LCI Tails\|Challenge CF Door Panels\|
	Appreciate 0 Quote

09-20-2012, 03:27 AM	#7
Lagunae92 Captain 53 Rep 754 Posts Drives: BMW e92 M3 Laguna Seca Blue Join Date: Jul 2009 Location: Long Beach iTrader: (0)	I assume I am from the lighter as per BMW instructions. __________________ 2009 e92 M3 Individual Laguna Seca Blue\|Black Novillo\|DCT\|19"rims\|Carbon Leather\|Premium\|Tech.\|Heated Seats\|Prem. Sound\|iPod\| Mods: \|Electronic Performance Steering Wheel\|ZCP CF Spoiler\|ZCP CF Spliters\|ZCP CF Mirrors\|Edition Front Grilles\|Edition Side Grilles\|BMW Performance Brake Handle\|3D Design Pedals\| Style Rumore Exhaust\|H&R Springs\|LCI Tails\|Challenge CF Door Panels\|
	Appreciate 0 Quote

09-20-2012, 08:44 AM	#9
THE TECH BimmerPost Supporting Vendor 220 Rep 13,104 Posts Drives: BPMsport 2012 E92 M3 Join Date: Jun 2011 Location: Kansas iTrader: (45) Garage List 2014 Honda Grom [0.00] 2012 Honda Ruckus [0.00] 2005 Chevy Silverad ... [0.00] 1995 Toyota Supra [0.00]	Congrats. I love my wheel.
	Appreciate 0 Quote

09-20-2012, 03:16 PM	#11
BimmerRob08 Major 58 Rep 1,261 Posts Drives: 2008 M3, Space Gray Join Date: Mar 2008 Location: KIKR (ABQ), NM iTrader: (0)	Can the light intensity of the shift lights be adjusted down? Maybe its due to the video but looks like at night it would be pretty bright and a distraction more so than a good situation builder?? Can the lights be adjusted along with the rest of the consul light settings then?
	Appreciate 0 Quote

09-20-2012, 03:29 PM	#15
warp10 Major 333 Rep 1,486 Posts Drives: 2011 M3 Jet Black:ZCP, ZCV, ZP Join Date: May 2011 Location: Atlanta, Ga iTrader: (6) Garage List 2011 M3 [5.00] 2011 28i X3 [0.00]	This might be slightly off topic but people that were having problems getting the shift light to work, setting kept but no rpm reading, were making a reset button by powering the wheel through the fuse box can someone explains the process for this? __________________
	Appreciate 0 Quote

09-20-2012, 04:38 PM	#16
PARTS@STBMW 704 Rep 3,700 Posts Drives: ALL BMW MODELS Join Date: Nov 2011 Location: Camarillo, CA iTrader: (3)	Awesome job with the install and the video! Looks great! __________________ http://www.BMWPartsPros.com PLEASE PROVIDE THE LAST 7 OF YOUR VIN FOR A PRICE QUOTE! BRIT@BMWPARTSPROS.COM
	Appreciate 0 Quote

09-20-2012, 08:17 PM	#18
Lagunae92 Captain 53 Rep 754 Posts Drives: BMW e92 M3 Laguna Seca Blue Join Date: Jul 2009 Location: Long Beach iTrader: (0)	You can adjust brightness if shift lights and screen. __________________ 2009 e92 M3 Individual Laguna Seca Blue\|Black Novillo\|DCT\|19"rims\|Carbon Leather\|Premium\|Tech.\|Heated Seats\|Prem. Sound\|iPod\| Mods: \|Electronic Performance Steering Wheel\|ZCP CF Spoiler\|ZCP CF Spliters\|ZCP CF Mirrors\|Edition Front Grilles\|Edition Side Grilles\|BMW Performance Brake Handle\|3D Design Pedals\| Style Rumore Exhaust\|H&R Springs\|LCI Tails\|Challenge CF Door Panels\|
	Appreciate 0 Quote

09-21-2012, 01:05 AM	#21
BIGW0RM You see, it's the principle of the whole thing... 144 Rep 2,692 Posts Drives: 2017 911 C2S Join Date: Jul 2011 Location: ///OC iTrader: (13) Garage List 2017 Porsche 911 S ... [0.00] 2017 F80 M3 DCT [0.00] 2016 BMW M4 6MT [0.00] 2013 BMW F10 DCT M5 [5.00] 2013 BMW E92 6MT M3 [4.75] 2011 BMW E92 DCT M3 [4.67]	Looks good OP. Nice video too. Thanks for putting that together. BMW would be killing it if they made it look like V1 but in full leather with all the bells and horns of V2.
	Appreciate 0 Quote

09-25-2012, 01:59 AM	#22
IntegraXTR Captain 104 Rep 651 Posts Drives: MY08 E92 M3 and MY15 F80 M3 Join Date: Dec 2011 Location: Hawaii iTrader: (1)	Nice! I love mine and mine has been working since day one (cept my constant power is via the JBE module).. Also, if you recode your car to have Efficient Dynamics, the led light blinks green to tell you to shift =) Lots of features and easy install ftw!
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search