FORUMS
- 5
![]() |
|
![]() |
| 09-10-2012, 01:17 PM | #1 |
|
First Lieutenant
![]() ![]() |
ground control coilover question
people with the ground control coilovers with edc...how low can the front go? i always see pictures that the rear is tucking tire and front still has finger gap... any1 have pictures of the lowest they can go in the front?
|
|
|
|
| 09-10-2012, 02:48 PM | #2 |
|
Enlisted Member
![]() |
All of them can go really low. The problem is that the lower you go, the less suspension travel you have which results in poor handling and poor drive-ability (comfort).
Unfortunately, the m3 suspension design doesn't allow for a lot of lowering if you want to maintain EDC and a good ride. |
![]() |
|
| 12-11-2012, 11:45 PM | #4 |
|
Captain
![]() ![]() ![]() ![]() |
interested on knowing how low they can go as well!
__________________
|
![]() |
|
| 12-12-2012, 12:23 AM | #5 |
|
I'm suckin gas but I'm haulin ass
|
I ran the GC sleeve kit at full low all the time. It was pretty low. Ride was bad. Now I run KW V3 at the same height and it rides much better and can definitely go much lower.
|
![]() |
|
| 12-13-2012, 11:29 PM | #7 |
|
tha_good_life
Drives: 2010 JzB E92 M3 Join Date: Jul 2008
Location: Seattle
|
You can check my garage <<<< That's with GC all the way down in the front.
|
![]() |
|
![]() |
| Bookmarks |
| Thread Tools | Search this Thread |
|
|