APEX EC-7 Wheels on Satin Black M3

Eddy@ApexRaceParts · 07-02-2012, 07:11 PM

APEX EC-7 in Anthracite Finish

18x10" ET25 with 275 R888
18x11" ET25 with 295 R888

This was a quick test fitment of prototype wheels so the tires are on the opposite side of the car

flipm3 · 07-02-2012, 07:21 PM

That looks down right menacing! Is that on the stock suspension as well?

Eddy@ApexRaceParts · 07-02-2012, 07:37 PM

This car was on V3's. The 275 R888's touch the spring because of the V shape spring that comes with the V3 kits. Those springs waste a lot of inner clearance unlike traditional coilovers. This resulted in having to bolt the wheels on in place so the car did not settle front and rear as much as a car on coilovers traditionally would.

TheDeliverator · 07-02-2012, 07:37 PM

Are the wheels above an example of the Anthracite finish option?

flipm3 · 07-02-2012, 07:39 PM

Quote:

Originally Posted by Eddy@ApexRaceParts

This car was on V3's. The 275 R888's touch the spring because of the V shape spring that comes with the V3 kits. Those springs waste a lot of inner clearance unlike traditional coilovers. This resulted in having to bolt the wheels on in place so the car did not settle front and rear as much as a car on coilovers traditionally would.

I definitely agree, especially considering that I have V3s on my E46 M3.

Thanks for clarifying. Seriously, these wheels look great!

Eddy@ApexRaceParts · 07-02-2012, 07:59 PM

Quote:

Originally Posted by TheDeliverator

Are the wheels above an example of the Anthracite finish option?

Yes, these are the Anthracite finish

THE TECH · 07-02-2012, 09:43 PM

Meaty.

CSanto · 07-02-2012, 10:46 PM

Quote:

Originally Posted by Eddy@ApexRaceParts

This car was on V3's. The 275 R888's touch the spring because of the V shape spring that comes with the V3 kits. Those springs waste a lot of inner clearance unlike traditional coilovers. This resulted in having to bolt the wheels on in place so the car did not settle front and rear as much as a car on coilovers traditionally would.

Interesting. Is there a way to make this wheel size/offset work with KW V3s. Or is it the tire size that's causing the issue?

OC ///M · 07-02-2012, 11:42 PM

^ He mentioned in another thread that the car had a 10mm spacer that was stuck on the car. This netted them a -17 offset....prolly had something to do with it.

I'd like to see a picture on the car with the 9.5 / 10.5 option. 265 / 285

I'm almost sold.

mkPOTO · 07-02-2012, 11:43 PM

Very nice might scoop up a set in the fall

BarryC · 07-03-2012, 07:55 AM

looks good but the front vs. rear ride height looks off... Given the way the rear sticks out in the third pic I don't see how it won't rub under compression.

BC

Eddy@ApexRaceParts · 07-03-2012, 11:16 AM

Quote:

Originally Posted by BarryC

looks good but the front vs. rear ride height looks off... Given the way the rear sticks out in the third pic I don't see how it won't rub under compression.

BC

275/35/18 fronts are taller than the 295/30/18 rears. This is not a recommended setup, but it was the tire sizes we had mounted up from a previous test fitment, and we bolted them on here just to see the wheel design.

The rear of this car had a 10mm spacer stuck to it which pushed out the rears to ET15. This again is not an ideal fitment, but it allowed us to see the design on the E9X M3 chassis. At ET25 it fits a lot cleaner.

BarryC · 07-03-2012, 12:09 PM

Quote:

Originally Posted by Eddy@ApexRaceParts

275/35/18 fronts are taller than the 295/30/18 rears. This is not a recommended setup, but it was the tire sizes we had mounted up from a previous test fitment, and we bolted them on here just to see the wheel design.

The rear of this car had a 10mm spacer stuck to it which pushed out the rears to ET15. This again is not an ideal fitment, but it allowed us to see the design on the E9X M3 chassis. At ET25 it fits a lot cleaner.

gotcha. good looking wheel! thanks for posting up some pics...

BC

Moxie · 07-03-2012, 12:18 PM

Quote:

Originally Posted by THE TECH

Meaty.

Beaty Big and Bouncy

grussell · 07-03-2012, 01:17 PM

SOLD! I am going to pre-order a set!

leigh · 07-03-2012, 06:39 PM

What sizes should I get for track and a little road use on a e92 m3 with a ess650 supercharger kit

swifty · 07-04-2012, 02:35 PM

Will you guys ever sell these wheels in brushed silver?

Hershey · 07-04-2012, 05:56 PM

Shots look awesome! Just talking to George during this shoot displayed what a talent he is. Knowledgeable guy also. Tell Jan Thanks for breakfast!

You can count on the Spacers being removed if there's a next time. #crossingfingers lol

smmmurf · 07-05-2012, 12:44 AM

possible to do a square setup? 18x9.5 et22 would I need to run a spacer?

thanks

Eddy@ApexRaceParts · 07-05-2012, 05:14 PM

Quote:

Originally Posted by leigh

What sizes should I get for track and a little road use on a e92 m3 with a ess650 supercharger kit

18x9.5" ET22 with 265/35/18 fronts and 18x11" ET25 with 295/30/18 would work well with a super charged car. That would work well with AD08's

Quote:

Will you guys ever sell these wheels in brushed silver?

Brushed silver won't be an option for this design

Quote:

Originally Posted by ///M*Hershey

Shots look awesome! Just talking to George during this shoot displayed what a talent he is. Knowledgeable guy also. Tell Jan Thanks for breakfast!

You can count on the Spacers being removed if there's a next time. #crossingfingers lol

Your car looks great! I heard about the new mods you'll be adding. Those should make it even better. HA, no spacers should help with the rear. We'll try street tires next time for a cleaner fit.

Quote:

possible to do a square setup? 18x9.5 et22 would I need to run a spacer?

18x9.5" ET22 can be run square with 275's easily. No spacers are needed. It's already the correct low offset front and rear

FR01 · 07-06-2012, 04:06 PM

looking awesome

J.Lowrey · 07-06-2012, 08:04 PM

meeeeeat

07-02-2012, 07:11 PM	#1
Eddy@ApexRaceParts BimmerPost Supporting Vendor Drives: E30 M3, 2011 335d Join Date: Jun 2009 Location: Bay Area, CA Posts: 1,565 iTrader: (5)	APEX EC-7 Wheels on Satin Black M3 APEX EC-7 in Anthracite Finish 18x10" ET25 with 275 R888 18x11" ET25 with 295 R888 This was a quick test fitment of prototype wheels so the tires are on the opposite side of the car __________________ \| Eddy Pintacsi \| 888.499.9135 x801 \| Facebook \| Blog \|
	0 Tweet

07-02-2012, 07:21 PM	#2
flipm3 E46 + E90 Drives: E46 M3 + E90 M3 Join Date: Jul 2008 Location: Illinois Posts: 2,687 iTrader: (1) Garage List 2009 BMW M3 [0.00] 2002 BMW M3 [0.00]	That looks down right menacing! Is that on the stock suspension as well? __________________ E90 M3 DCT\|Melbourne Red . Speed Cloth \| My Build Thread . Stock Dyno . Evolve X-Pipe Dyno . Evolve DCT SW Review . Evolve Tune Review E46 M3 6MT\|Jet Black . Black Nappa Leather \| My Build Thread
	0

07-02-2012, 07:37 PM	#3
Eddy@ApexRaceParts BimmerPost Supporting Vendor Drives: E30 M3, 2011 335d Join Date: Jun 2009 Location: Bay Area, CA Posts: 1,565 iTrader: (5)	This car was on V3's. The 275 R888's touch the spring because of the V shape spring that comes with the V3 kits. Those springs waste a lot of inner clearance unlike traditional coilovers. This resulted in having to bolt the wheels on in place so the car did not settle front and rear as much as a car on coilovers traditionally would. __________________ \| Eddy Pintacsi \| 888.499.9135 x801 \| Facebook \| Blog \|
	0

07-02-2012, 09:43 PM	#7
THE TECH BimmerPost Supporting Vendor Drives: BPMsport 2012 E92 M3 Join Date: Jun 2011 Location: Kansas Posts: 12,407 iTrader: (39) Garage List 2014 Honda Grom [0.00] 2012 Honda Ruckus [0.00] 2005 Chevy Silverad ... [0.00] 1995 Toyota Supra [0.00] 2012 BMW E92 M3 [0.00]	Meaty. __________________ -----\| Like us on Facebook \| Instagram \|\| Tuning Information \| Remote Coding \|----- ----Visit us at www.BPMSport.com - Emotion. Driven. \| Toll Free: (888) 557-5133----
	0

07-02-2012, 11:42 PM	#9
OC ///M Dr. Octagon Drives: SSII e92 M3 Join Date: Feb 2007 Location: So Cal Posts: 1,802 iTrader: (0)	^ He mentioned in another thread that the car had a 10mm spacer that was stuck on the car. This netted them a -17 offset....prolly had something to do with it. I'd like to see a picture on the car with the 9.5 / 10.5 option. 265 / 285 I'm almost sold. __________________ OC ///M 2013 E92 M3 Individual Sold: 2011 E92 M3 SSII \| Sold: 2008 E92 M3 SSII \| Into a Wall: 2008 E92 M3 SSII \| Sold: 2007 E92 335i JB
	0

07-02-2012, 07:37 PM	#4
TheDeliverator Second Lieutenant Drives: A Singularity Join Date: Mar 2012 Location: MD Posts: 225 iTrader: (1)	Are the wheels above an example of the Anthracite finish option?
	0

07-02-2012, 11:43 PM	#10
mkPOTO Mr. Nice Says Hello Drives: 1999 528I Join Date: Dec 2008 Location: Chicago Posts: 14,519 iTrader: (20) Garage List 2008 BMW E92 M3 [2.74] 1999 BMW E39 528i [2.20] 2007 BMW E92 335I [3.00]	Very nice might scoop up a set in the fall __________________ BMW E92 M3 EVOLVE Stage II \| EVOLVE X-Pipe \| EVOLVE E-Tronic Exhaust Macht Schnell Stage II intake \| KW V3 \| Volk TE37SL \| BMW Performance Spoiler Apex Stud Kit
	0

07-03-2012, 07:55 AM	#11
BarryC Major Drives: '13 LRP M3 Join Date: May 2007 Location: Kernersville NC Posts: 1,078 iTrader: (10)	looks good but the front vs. rear ride height looks off... Given the way the rear sticks out in the third pic I don't see how it won't rub under compression. BC __________________ 2013 Lime Rock M3 6speed, ESS VT1-550, ESS HFCs and exhaust, MCS single adjustables, Fire Orange PFC Z31 BBK, Forgeline GA1R 19x10/19x11, Yoko AD08R 275&295/30/19, ModeCarbon GT4 Lip, UUC SSK
	0

07-03-2012, 01:17 PM	#15
grussell Private First Class Drives: 2012 SG E92 M3 Join Date: Jun 2012 Location: Valencia, CA Posts: 124 iTrader: (3)	SOLD! I am going to pre-order a set!
	0

07-03-2012, 06:39 PM	#16
leigh Captain Drives: 2011 e92 zcp m3 Join Date: Aug 2010 Location: melbourne Posts: 846 iTrader: (0)	What sizes should I get for track and a little road use on a e92 m3 with a ess650 supercharger kit
	0

07-04-2012, 02:35 PM	#17
swifty Major Drives: FO M3 Join Date: Aug 2008 Location: canada Posts: 1,005 iTrader: (3)	Will you guys ever sell these wheels in brushed silver?
	0

07-04-2012, 05:56 PM	#18
Hershey CLU KINGSMEN Drives: E92 Join Date: Aug 2009 Location: Green Valley, CA Posts: 463 iTrader: (3)	Shots look awesome! Just talking to George during this shoot displayed what a talent he is. Knowledgeable guy also. Tell Jan Thanks for breakfast! You can count on the Spacers being removed if there's a next time. #crossingfingers lol __________________ E46 M3 vert CB \| Cinnamon \| SMG E92 JB \| Bamboo \| 6MT \|
	0

07-05-2012, 12:44 AM	#19
smmmurf Colonel Drives: 2009 M3 Sedan 6MT Join Date: Feb 2008 Location: Pleasanton, CA Posts: 2,010 iTrader: (7)	possible to do a square setup? 18x9.5 et22 would I need to run a spacer? thanks __________________ M3 Sedan LCI - AW/Black - 6MT - no moonroof - no folding seats - RAC RG63 - clear bra by Omega Werks Driving the Performance Technic/BMW Concord #46 M3 in USTCC GT for 2013
	0

07-06-2012, 04:06 PM	#21
FR01 First Lieutenant Drives: 2011 E92 Join Date: Dec 2011 Location: San Jose Posts: 318 iTrader: (0) Garage List 2011 BMW M3 [0.00] 1995 BMW M3 [0.00]	looking awesome __________________ 2011 M3 Dakar Yellow-Black Leather-Comp Pkg-DCT-Akra Evo-AP BBK Front-VOLK RE30/BBS GT4 18x10" Square 1995 M3 Boston Green - Chipped - Ground Control Coilovers - APEX ARC8 Past: 2005 Porsche Boxster S-Silver-6spd-Fabspeed Exhaust
	0

07-06-2012, 08:04 PM	#22
J.Lowrey New Member Drives: hyundai Join Date: Jul 2012 Location: louisiana Posts: 5 iTrader: (0)	meeeeeat
	0

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search