✪ Alekshop ⎢Now Offering Corner Weight Balancing in House

Sam@Alekshop · 05-31-2012, 11:12 PM

Now your car can be balanced, corner weighted and aligned in one place.

Setting the car properly for the street or for the track is not an easy task. Surely it becomes easy if you have the right equipment and knowledgeable stuff. We have both!

With the change in the geometry of the suspension when lowering the car, it’s crucial to maintain the right ride height and perfect weight distribution. In order to achieve that, it requires more than just to align the car and tell the customer your car is done. The proper way to do that, is to place your car on the scales and measure each corner to see how the car is balanced. Of course prior to that, we ensure that the ride height is set to be the same on all four corners so we can get our base line readings. Once you get that out of the way, now you can play with the suspension and adjust each corner to achieve the perfect balance.

bape_sta206 · 05-31-2012, 11:21 PM

good stuff!

Sam@Alekshop · 06-01-2012, 09:39 PM

Quote:

Originally Posted by bapesta206

good stuff!

Hershey · 06-01-2012, 09:45 PM

Nice!

ottoblotto · 06-02-2012, 12:34 AM

Seriously, Im so digging this... Good stuff there.

Sam@Alekshop · 06-04-2012, 07:38 AM

Quote:

Originally Posted by ///M*Hershey

Nice!

Quote:

Originally Posted by ottoblotto

Seriously, Im so digging this... Good stuff there.

Alekshop · 06-04-2012, 04:38 PM

Here is another car that was recently CW balanced and aligned

Alekshop · 06-05-2012, 10:12 AM

Quote:

Originally Posted by ///M*Hershey

Nice!

It's time to setup suspension on your car !

1MOREMOD · 06-05-2012, 10:15 AM

nice. where are you located again. may need this after i get the new AST 4250s installed.

Malek@MRF · 06-05-2012, 05:27 PM

Great job guys!

Love how clean the shop is too!

Malek

Alekshop · 06-05-2012, 09:11 PM

Quote:

Originally Posted by chriszeh

nice. where are you located again. may need this after i get the new AST 4250s installed.

We are in Fremont, CA. Give us a call and I'll be glad to go over your options and we can set you car up to you needs.

Alekshop · 06-05-2012, 09:13 PM

Quote:

Originally Posted by Malekreza11

Great job guys!

Love how clean the shop is too!

Malek

Thanks! We try to keep it clean

Sam@Alekshop · 06-06-2012, 08:06 AM

Here is Mark's car being corner-weight balanced after installing KW V3 suspension.

Set of BBS Motorsport Porsche wheels that that we recently mounted and RoadForce balanced

1MOREMOD · 06-06-2012, 09:56 AM

Oh sorry for some reason I thought you were in portland area. CA is a little far for me.

Hershey · 06-06-2012, 08:40 PM

Quote:

Originally Posted by Alekshop

Quote:

Originally Posted by ///M*Hershey

Nice!

It's time to setup suspension on your car !

Yes. That's the next call! Lol

Singletrack · 06-06-2012, 09:26 PM

Great service offering!

Sam@Alekshop · 06-07-2012, 08:04 AM

Quote:

Originally Posted by Singletrack

Great service offering!

Sal@AUTOcouture · 06-07-2012, 08:45 AM

We have the same setup

Sam@Alekshop · 06-07-2012, 08:14 PM

Quote:

Originally Posted by Sal@AUTOcouture

We have the same setup

Nice work

Alekshop · 06-13-2012, 10:52 AM

Here is a 335D being CW balanced after the installation of KW V3 with Vorshlag CP

Alekshop · 11-09-2012, 03:24 PM

Here is one of 70 C63 Black Series being CWB for the Sears Point track

dewuser · 11-09-2012, 04:18 PM

Quote:

Originally Posted by Sam@Alekshop

Set of BBS Motorsport Porsche wheels that that we recently mounted and RoadForce balanced

Wow, now you are talking. I'll be in touch!

05-31-2012, 11:12 PM	#1
Sam@Alekshop BimmerPost Supporting Vendor Drives: BMW M3 Join Date: May 2012 Location: Alekshop Posts: 138 iTrader: (0)	✪ Alekshop ⎢Now Offering Corner Weight Balancing in House Now your car can be balanced, corner weighted and aligned in one place. Setting the car properly for the street or for the track is not an easy task. Surely it becomes easy if you have the right equipment and knowledgeable stuff. We have both! With the change in the geometry of the suspension when lowering the car, it’s crucial to maintain the right ride height and perfect weight distribution. In order to achieve that, it requires more than just to align the car and tell the customer your car is done. The proper way to do that, is to place your car on the scales and measure each corner to see how the car is balanced. Of course prior to that, we ensure that the ride height is set to be the same on all four corners so we can get our base line readings. Once you get that out of the way, now you can play with the suspension and adjust each corner to achieve the perfect balance.
	Tweet

06-01-2012, 09:45 PM	#4
Hershey CLU KINGSMEN Drives: E92 Join Date: Aug 2009 Location: Green Valley, CA Posts: 436 iTrader: (3)	Nice! __________________ E46 M3 vert CB \| Cinnamon \| SMG E92 JB \| Bamboo \| 6MT \|

06-02-2012, 12:34 AM	#5
ottoblotto Suddenly, Drives: A Wild M3 Join Date: Apr 2011 Location: Appears! Posts: 998 iTrader: (2) Garage List 2010 BMW X5 [0.00] 2011.75 BMW M3 E90 [5.00]	Seriously, Im so digging this... Good stuff there. __________________ "With great power comes great responsibility." -El-Superbeasto

06-04-2012, 04:38 PM	#7
Alekshop BimmerPost Supporting Vendor Drives: M3LR l 1M l X5 l GT-R Join Date: Nov 2009 Location: Bay Area Posts: 2,130 iTrader: (7)	Here is another car that was recently CW balanced and aligned __________________ Like us on Facebook ✆ 925.609.4559 ✉ info@alekshop.com

06-05-2012, 10:15 AM	#9
1MOREMOD Major General Drives: at a moderate pace Join Date: Mar 2009 Location: garage Posts: 6,603 iTrader: (3)	nice. where are you located again. may need this after i get the new AST 4250s installed. __________________ 02 Tiag e46 M3\|6MT\|GC plates\|MCS c.o.\|GC race control arms\|GC bushings & bearings\|BW eng. & tran. mounts\|subframe kit\|BW race shifter\|BW Jaffster knob\|Euro header\|Eisenmann sport\|K&N c.a.i.\|Epic race tune\|race pulleys\|Seibon CF hood\|CSL bumper\|CSL brakes\|RS19s\|SS lines\|half cage\|Recaro profi\|Profi 2 harness\|BMWpedals\|Apex studs\|

05-31-2012, 11:21 PM	#2
bape_sta206 tha_good_life Drives: 2010 JzB E92 M3 Join Date: Jul 2008 Location: Seattle Posts: 3,640 iTrader: (14) Garage List 2010 BMW M3 [4.27]	good stuff!

06-05-2012, 05:27 PM	#10
Malek@MRF BimmerPost Supporting Vendor Drives: E92 ZCP Melbourne 6MT Join Date: Jan 2008 Location: Irvine, California Posts: 2,888 iTrader: (5)	Great job guys! Love how clean the shop is too! Malek __________________ MRF on Facebook Southern California's largest & most reputable E9x M3 forced induction & suspension facility. *"Performance; Uncompromised."*

06-06-2012, 08:06 AM	#13
Sam@Alekshop BimmerPost Supporting Vendor Drives: BMW M3 Join Date: May 2012 Location: Alekshop Posts: 138 iTrader: (0)	Here is Mark's car being corner-weight balanced after installing KW V3 suspension. Set of BBS Motorsport Porsche wheels that that we recently mounted and RoadForce balanced

06-06-2012, 09:56 AM	#14
1MOREMOD Major General Drives: at a moderate pace Join Date: Mar 2009 Location: garage Posts: 6,603 iTrader: (3)	Oh sorry for some reason I thought you were in portland area. CA is a little far for me. __________________ 02 Tiag e46 M3\|6MT\|GC plates\|MCS c.o.\|GC race control arms\|GC bushings & bearings\|BW eng. & tran. mounts\|subframe kit\|BW race shifter\|BW Jaffster knob\|Euro header\|Eisenmann sport\|K&N c.a.i.\|Epic race tune\|race pulleys\|Seibon CF hood\|CSL bumper\|CSL brakes\|RS19s\|SS lines\|half cage\|Recaro profi\|Profi 2 harness\|BMWpedals\|Apex studs\|

06-06-2012, 09:26 PM	#16
Singletrack 4th down; 4th quarter? Renegade. Drives: 09 SSII E92 M3; 12 AW X5d Join Date: Aug 2008 Location: Pittsburgh, PA Posts: 3,800 iTrader: (3)	Great service offering! __________________ Singletrack's M3 iND/Singletrack's X5d

06-07-2012, 08:45 AM	#18
Sal@AUTOcouture BimmerPost Supporting Vendor Drives: Techno Violet ESS M3 Join Date: Feb 2007 Location: NJ Posts: 8,870 iTrader: (28)	We have the same setup __________________ ACM Testpipes \| ESS Superchargers \| Aquamist Meth Kits \| P: 201.666.3500 \| Sal@autocouturemotoring.com \| Facebook \| youTube

06-13-2012, 10:52 AM	#20
Alekshop BimmerPost Supporting Vendor Drives: M3LR l 1M l X5 l GT-R Join Date: Nov 2009 Location: Bay Area Posts: 2,130 iTrader: (7)	Here is a 335D being CW balanced after the installation of KW V3 with Vorshlag CP __________________ Like us on Facebook ✆ 925.609.4559 ✉ info@alekshop.com

11-09-2012, 03:24 PM	#21
Alekshop BimmerPost Supporting Vendor Drives: M3LR l 1M l X5 l GT-R Join Date: Nov 2009 Location: Bay Area Posts: 2,130 iTrader: (7)	Here is one of 70 C63 Black Series being CWB for the Sears Point track

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search