BMW M3 Forum (E90 E92)

BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Go Back   M3Post - BMW M3 Forum > E90/E92 M3 Technical Topics > DIY Guides/ Discussions
 
VF Engineering
Post Reply
 
Thread Tools Search this Thread
      03-01-2012, 08:23 PM   #45
Venom
Colonel
 
Venom's Avatar
 
Drives: E82 135i
Join Date: May 2011
Location: Huntington Beach, CA

Posts: 2,100
iTrader: (5)

Garage List
2008 BMW 135i  [4.25]
Send a message via AIM to Venom
Great write up! I just did this and since I didn't have the white piece on my e82, I used a few pieces of legos

Quote:
Originally Posted by SROC5 View Post
Just did this, took a little extra effort since I have an 08 E92 (no plastic stalk/ lego piece). My method was three fold:

1) Pen cap (acts as a plastic stalk to push the custom flat surface)
2) Pen cap connects to a small cut out credit card square plate (use any old credit card) - cut two squares to fit into the space
3) Sandwich double tape between the two credit card squares, adjust thickness as needed (by adding more double tape. Trail and error until you feel the two rubber buttons are pushed by the switch.

DIYs where you got to think on your feet, get creative = mad FUN!
__________________
Venom Build Log
Mods: JB4 G5 ISO, RR DPs, GTHaus Meistershaft Exhaust, RKP GTS Wing, Wagner FMIC, VMR V701s in Scarlet Red, Custom shift knob, Full 1M Body Conversion, and more.

Prius is Latin for impotence.
Venom is offline   United_States
0
Reply With Quote
      03-17-2012, 06:34 PM   #46
larryn
Major General
 
Drives: '97 332ti, '10 E92 M3
Join Date: May 2005
Location: Seattle

Posts: 8,439
iTrader: (2)

Fantastic! Just did this on my newly acquired M3. Works like a charm.

I messed up and traded my 135i in with the Euro switch installed, and I was wondering how I could get this to work on the M3.

Thanks!
larryn is offline   United_States
0
Reply With Quote
      03-19-2012, 06:34 AM   #47
roastbeef
Captain
 
roastbeef's Avatar
 
Drives: E92 M3
Join Date: Nov 2010
Location: Orange County, CA

Posts: 784
iTrader: (0)

cool. what color is the light? is it a different bulb than the reverse light?
roastbeef is offline   United_States
0
Reply With Quote
      03-25-2012, 10:55 AM   #48
larryn
Major General
 
Drives: '97 332ti, '10 E92 M3
Join Date: May 2005
Location: Seattle

Posts: 8,439
iTrader: (2)

Quote:
Originally Posted by roastbeef View Post
cool. what color is the light? is it a different bulb than the reverse light?
It is a bright red light. I believe it uses the 2-stage brake lights "high threshold" bulb, from the look of it.
larryn is offline   United_States
0
Reply With Quote
      03-31-2012, 12:24 AM   #49
NELSON.MLGB
Captain
 
NELSON.MLGB's Avatar
 
Drives: 2010 E92 JB M3
Join Date: Dec 2011
Location: Calgary,AB

Posts: 656
iTrader: (3)

Does the botton pop back?
NELSON.MLGB is offline   Canada
0
Reply With Quote
      03-31-2012, 06:18 AM   #50
quads
Lieutenant Colonel
 
Drives: bac mono
Join Date: Apr 2010
Location: racetrack

Posts: 1,643
iTrader: (3)

anyone notice the top button turns on the lights (when dial is on auto)
quads is offline  
0
Reply With Quote
      03-31-2012, 08:17 AM   #51
larryn
Major General
 
Drives: '97 332ti, '10 E92 M3
Join Date: May 2005
Location: Seattle

Posts: 8,439
iTrader: (2)

Quote:
Originally Posted by NELSON.MLGB View Post
Does the botton pop back?
Yes, it feels and functions like a proper button.

Quote:
Originally Posted by 4sevens.com View Post
anyone notice the top button turns on the lights (when dial is on auto)
I left the top white spacer in, and did not cut those tabs on the actual top button. I only modified the bottom button. Since some are now talking about utilizing the top button for other one-off functions, that great info to know.
larryn is offline   United_States
0
Reply With Quote
      03-31-2012, 04:15 PM   #52
OC3
Havin' a blast!
 
OC3's Avatar
 
Drives: 2013 M3 E92 Jerez Blk DCT ZCP
Join Date: Nov 2010
Location: SoCal

Posts: 4,803
iTrader: (1)

Even in (usually) sunny SoCal, this comes in handy. Like when driving thru the Tejon Pass/Grapevine on rainy/foggy mornings on the way to Buttonwillow.
__________________

BRP CW13 1:58 | CVR CW 2:01 | CVR CCW 2:02 | ACS 1:53 | WSIR 1:34
2013 E92 M3 Jerez Black DCT ZCP | JRZ RS Pro | Brembo BBK | Endless ME20 | Volk TE37 18x10.5 squared | NT01/TD
OC3 is offline   United_States
0
Reply With Quote
      04-04-2012, 11:07 PM   #53
BLACK OPS
Captain
 
BLACK OPS's Avatar
 
Drives: E92 M3 6MT
Join Date: Sep 2011
Location: CO, USA

Posts: 790
iTrader: (0)

__________________

2011.5 Jet Black E92 ///M3: ZCP|6MT|BB|DINAN|EVOLVE|BPM|VORSTEINER|BMW PERFORMANCE|IND EDITION|TMS|LUX 5K|APEX|
BLACK OPS is offline   United_States
0
Reply With Quote
      04-08-2012, 12:03 PM   #54
beach bimmer
New Member
 
Drives: 11-M3
Join Date: Feb 2008
Location: seaview,wa

Posts: 27
iTrader: (0)

Outstanding DIY writeup. I just activated both buttons. Will use the top button for a future front fog light installation. Thankyou!
beach bimmer is offline  
0
Reply With Quote
      05-01-2012, 08:35 PM   #55
DARK_M3
Banned
 
Drives: 08 E90, 89 Grand Wagoneer
Join Date: Mar 2012
Location: So Cal

Posts: 1,294
iTrader: (3)

Excellent write up. I just did my '08 E90. Took a bit of creativity with legos, double sided tape and a small bit of plexiglass but in the end... success!!

Excuse the crappy cell pics.

Dash light when activated:


Regular lights:


Fog's on:


It's pretty light outside but you get the idea. Very simple!
DARK_M3 is offline  
0
Reply With Quote
      05-21-2012, 11:26 PM   #56
I M STIG
RawAutos.com
 
I M STIG's Avatar
 
Drives: 2009 E90 M3
Join Date: May 2008
Location: North Carolina

Posts: 477
iTrader: (0)

I wonder, since the top button will activate the headlights when in auto, will the headlights still turn? I found out early on that having the headlights in the on position causes the headlights to not turn whenever you turn the steering wheel (I know most of us know this). But I wonder if that's the case with the front fog button pushed...?
__________________

2009 E90 M3| Jerez Black | Extended Silver Novillo with Brushed Aluminum | 6MT | EDC | Premium Package II | Convenience Package | Enhanced Premium Sound | HD Radio | Heated front seats | Fold down rear seats | Moonroof | 19" wheels |
RawAutos.com
I M STIG is offline   United_States
0
Reply With Quote
      05-25-2012, 09:00 PM   #57
MMME30W
Riff Raff Refugee
 
MMME30W's Avatar
 
Drives: Civic
Join Date: Mar 2012
Location: Tampa

Posts: 625
iTrader: (1)

Apologies if I missed it, but is it mandatory to remove the upper trim piece before levering off the light switch assembly? The video on the ECS web site seems to show it is not, but I'm not 100% certain that applies to an '09 E92?

http://www.ecstuning.com/BMW-E92-M3-...tch/ES1899562/

Edit - Aha, may have also found the trim removal tool in video:

http://www.harborfreight.com/5-piece...set-67021.html
__________________


Character does count. For too long we have gotten by in a society that says the only thing right is to get by and the only thing wrong is to get caught. Character is doing what's right when nobody is looking... " --J. C. Watts

Last edited by MMME30W; 05-25-2012 at 09:44 PM.
MMME30W is offline   Germany
0
Reply With Quote
      05-26-2012, 07:56 AM   #58
BimmerM
Lieutenant
 
BimmerM's Avatar
 
Drives: '11.5 E92 M3, '05 X5 4.8is
Join Date: Mar 2008
Location: NYC

Posts: 528
iTrader: (0)

Garage List
2005 BMW X5 4.8is  [0.00]
2011 BMW M3  [0.00]
Quote:
Originally Posted by Llando88 View Post
Apologies if I missed it, but is it mandatory to remove the upper trim piece before levering off the light switch assembly? The video on the ECS web site seems to show it is not, but I'm not 100% certain that applies to an '09 E92?
You don't have to remove the vent trim but I chose to do it because I have full leather interior and didn't want to use the leather trim as the leverage point to pry the switch out. Removing the vent trim lets you just grab a hold of the light switch and wiggle it out. Also if you notice on the top of the light switch is a lip that hooks under the upper trim. Removing the upper trim will make it easier (at least for me). Either way will work.
__________________

Drives: '11.5 Interlagos Blue E92 M3, '05 LeMans Blue X5 4.8is
Sold: '03.5 Mystic Blue E46 M3
DIYs: Enable Rear Fog | Easy Side Gill Replacement | Front Grill Replacement
BimmerM is offline   United_States
0
Reply With Quote
      05-26-2012, 06:02 PM   #59
MMME30W
Riff Raff Refugee
 
MMME30W's Avatar
 
Drives: Civic
Join Date: Mar 2012
Location: Tampa

Posts: 625
iTrader: (1)

Quote:
Originally Posted by BimmerM View Post
You don't have to remove the vent trim but I chose to do it because I have full leather interior and didn't want to use the leather trim as the leverage point to pry the switch out. Removing the vent trim lets you just grab a hold of the light switch and wiggle it out. Also if you notice on the top of the light switch is a lip that hooks under the upper trim. Removing the upper trim will make it easier (at least for me). Either way will work.
Perfect Ty sir.
__________________


Character does count. For too long we have gotten by in a society that says the only thing right is to get by and the only thing wrong is to get caught. Character is doing what's right when nobody is looking... " --J. C. Watts
MMME30W is offline   Germany
0
Reply With Quote
      05-29-2012, 08:49 PM   #60
Upier
Registered
 
Drives: 330ci
Join Date: Apr 2010
Location: USA

Posts: 2
iTrader: (0)

Quote:
Originally Posted by swamp2 View Post
Cost of manufacturing (as few changes to as few parts as possible) as well as local country laws on optional equipment both contribute to the configuration we see in production. I bet rear fogs are illegal in many places in the US.
Actually I think it is for the second brake light. If you look in the manual you will find that when you hit the brakes the brake lights come on (nosh!## right) but if you hit the pedal harder the brake lights get brighter. I am sure that is what the extra bulbs are for.

Upier is offline  
0
Reply With Quote
      06-16-2012, 11:46 PM   #61
bsiciliano
Captain
 
Drives: 2011 M3 Convertible
Join Date: Apr 2011
Location: Los Angeles

Posts: 641
iTrader: (4)

Just did this. Thanks for the write up. Worked like a charm. They are really bright. As soon as I pressed the button the neighbors white garaged door lit up from 30 feet away.
__________________
2011 E93 - Space Gray - 6MT/Silver Novillo/
OE Tuning/Gruppe M Intake/ACS Springs/Vorsteiner CF Type I Rear Diffuser/Textured Matte Black Custom Powdercoated OEM 359s/Painted Reflectors/Matte Grille, Hood Vents and Side Markers/Arqray Race Exhaust/MS Pulley
bsiciliano is offline   United_States
0
Reply With Quote
      06-20-2012, 07:04 PM   #62
ILSMKU
BMW FTW
 
ILSMKU's Avatar
 
Drives: E92 M3
Join Date: Jul 2011
Location: ///OC

Posts: 1,646
iTrader: (5)

Garage List
On step 8, my dam button wont push out! little bastard! (edit, got it out!)
__________________
///2013 AW 6MT E92 ZCP M3/// Black 359M Wheels/BMW Performance Carbon Fiber Spoiler and Mirror Caps/Arkym AeroSport Front Lip/Turner 15MM Spacers/LUX 8 LED Halo/IND Gloss Black Grills, Gills and M3 Emblem/30% 3M Tint/BMW Interior LED/MusicCar Subwoofer Enclosure/JL Audio 12" W6 Sub and XD600:1 Amp/Euro Sunglasses Tray/Ceramic Coated Megan Racing Exhaust/AFe Dry Air Filter/RPI Intake Scoops/Euro MDM/Feature Coded.

Last edited by ILSMKU; 06-20-2012 at 07:48 PM.
ILSMKU is offline   No_Country
0
Reply With Quote
      07-14-2012, 08:38 AM   #63
bsiciliano
Captain
 
Drives: 2011 M3 Convertible
Join Date: Apr 2011
Location: Los Angeles

Posts: 641
iTrader: (4)

Quote:
Originally Posted by 4sevens.com
anyone notice the top button turns on the lights (when dial is on auto)
When I did this I removed both sets of white tabs to see what would happen, but I didn't realize the top button activated the headlights when turned to auto until you pointed it out. Good catch!
__________________
2011 E93 - Space Gray - 6MT/Silver Novillo/
OE Tuning/Gruppe M Intake/ACS Springs/Vorsteiner CF Type I Rear Diffuser/Textured Matte Black Custom Powdercoated OEM 359s/Painted Reflectors/Matte Grille, Hood Vents and Side Markers/Arqray Race Exhaust/MS Pulley
bsiciliano is offline   United_States
0
Reply With Quote
      07-24-2012, 04:02 PM   #64
hova00
Captain
 
hova00's Avatar
 
Drives: E92 M3
Join Date: Apr 2008
Location: EAST COAST

Posts: 657
iTrader: (6)

Thanks. Gives me something free to do to the car.
hova00 is offline  
0
Reply With Quote
      07-24-2012, 10:50 PM   #65
ramuman
Private First Class
 
Drives: -
Join Date: Mar 2012
Location: USA

Posts: 160
iTrader: (0)

Thanks OP. Worked like a charm. Not sure when I'll use it, but at least I know there's one less intuitionally disabled feature on my car. Step 8 was the only PITA since I couldn't find my eyeglass size flathead screwdrivers.
ramuman is offline  
0
Reply With Quote
      08-05-2012, 03:41 PM   #66
rocket_science
In Training
 
rocket_science's Avatar
 
Drives: '11 AW E92 M3 ZCP
Join Date: Apr 2011
Location: Fort Myers, FL / Pittsburgh, PA

Posts: 102
iTrader: (2)

The perfect rainy day DIY. Except the rain lasted longer that the DIY (15 min). Thanks!
rocket_science is offline   United_States
0
Reply With Quote
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 08:53 AM.




m3post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST