Toronto M tuner shops?

simmsimmma · 05-07-2012, 03:28 PM

Hey guys doing a few Mods to my M and I am curious who is the best to deal with in the Toronto area to get a tune done? I want to dyno the car once I get on my Gintani Exhaust, RPI scoops,BMC drop in filter,ESS tune and Dinan Pulley this should all be done in the next few weeks... please let me know your recommendations thanks!

STALKER · 05-07-2012, 04:27 PM

Are you looking to get a tune, or did you already purchase the ESS Tune?
I personally use Engineered Automotive usually, they are on the expensive side, but the work is always done properly.

simmsimmma · 05-07-2012, 06:43 PM

I have the tune was going to do it myself and then planned on running it on a Dyno to see what else they could get out of the Motor.

sawzall · 05-07-2012, 08:07 PM

I'm going to Bimmersport Automotive tomorrow in Mississauga. It'll be my first time going there. They've been really accommodating thus far. I'll post my experience with them once i'm back. They are an ESS shop but I don't know if they have a dyno.

schnell325 · 05-07-2012, 08:21 PM

I don't think Bimmeraport has a dyno, but they have great long distance customer service, to say the least!

dnotorious · 05-07-2012, 08:38 PM

My neighbour just had his car rebuilt (JDM) @ Rukus Motorsports, Toronto. He has a dyno; he can do pulls for you; but he doesnt do any specific tuning (i.e. carry hardware/software for E9x M3); for 2 pulls he will charge about $60 bucks. I was planning on getting my car dyno (for shitngiggles) and just see what kinda hp I in stock form.

KJ · 05-07-2012, 11:10 PM

I've worked with Bimmersport before and they're great!

John's a good guy.

- KJ

STALKER · 05-07-2012, 11:12 PM

EA has a dyno.

sawzall · 05-08-2012, 06:33 PM

Quote:

Originally Posted by shizzle

I'm going to Bimmersport Automotive tomorrow in Mississauga. It'll be my first time going there. They've been really accommodating thus far. I'll post my experience with them once i'm back. They are an ESS shop but I don't know if they have a dyno.

Just a follow up to my previous note. Bimmersport did my part out today and they were absolutely fantastic. They got my brakes, exhaust, lips and studs all taken car of in no time, and went above and beyond by wrapping up all of my parts carefully before putting them in the car. I highly recommend them (but they don't have a dyno).

Dellort_M3 · 05-11-2012, 06:47 AM

Quote:

Originally Posted by shizzle

Just a follow up to my previous note. Bimmersport did my part out today and they were absolutely fantastic. They got my brakes, exhaust, lips and studs all taken car of in no time, and went above and beyond by wrapping up all of my parts carefully before putting them in the car. I highly recommend them (but they don't have a dyno).

Not to thread jack, but what happened to Speedstar parting out your car?

sawzall · 05-11-2012, 09:24 AM

Quote:

Originally Posted by Dellort_M3

Not to thread jack, but what happened to Speedstar parting out your car?

I ended up having some work that day, so the part out was moved to Bimmersport Automotive in Mississauga (much closer to where I live). Speedstar is a good shop, I would have gone there if I didn't have some work pop up. The part out was completed.

Chriskm3 · 07-27-2012, 10:24 PM

one of the gurus from bimmersport went on his own and opened up a ashop: Located at 27 and steeles. I have used him about 3 times and i can tell you he has the know how, and talent complimanted by a cheaper price. Vroom is the company name.

bobblehead · 07-28-2012, 07:17 AM

^ can you disclose more contact info. exact address, phone #, etc.

KmndntKlink · 09-01-2012, 03:04 PM

I'm also looking into getting some upgrades and was looking for a shop that wasn't bmw. Anyone hear of/go to RMP motors in etobicoke? Also the reviews on google for bimmersport auto are really bad, are they baseless (claiming decrease in quality and high prices)? I heard they were supposed to be good, and they're very close for me so I'd really appreciate some advice.

TIYA!

Kriston · 09-07-2012, 09:22 AM

I would definately suggest Rocco @ RMP.

He is a straight shooter, no frills just good work.

a///Mazed · 09-07-2012, 09:32 AM

Before I go to BMW, any reputable shops able to do the software update on our cars?
http://www.m3post.com/forums/showthread.php?t=676637

Giccy · 09-07-2012, 11:30 AM

Heard good things about both Bimmersport and RMP.

Had my V3s installed at RMP and Rocco is the man, for sure.

No BS, just great, honest work (and he knows his shit).

Chriskm3 · 09-08-2012, 10:40 PM

Quote:

Originally Posted by Kriston

I would definately suggest Rocco @ RMP.

He is a straight shooter, no frills just good work.

I wish I could say the same. I phoned them four times in regards to repairs and upgrades. The lady answers the phone. She has taken my phone number several times and indicated her husband will call me back.
Not even one call. Sad but true.

Kriston · 09-09-2012, 08:22 AM

Quote:

Originally Posted by Chriskm3

I wish I could say the same. I phoned them four times in regards to repairs and upgrades. The lady answers the phone. She has taken my phone number several times and indicated her husband will call me back.
Not even one call. Sad but true.

Sorry to hear that, they generally are pretty good. Recently they have become more busy.

05-07-2012, 03:28 PM	#1
simmsimmma Registered 1 Rep 2 Posts Drives: 2008 E92 M3 Join Date: May 2012 Location: BARRIE iTrader: (0)	Toronto M tuner shops? Hey guys doing a few Mods to my M and I am curious who is the best to deal with in the Toronto area to get a tune done? I want to dyno the car once I get on my Gintani Exhaust, RPI scoops,BMC drop in filter,ESS tune and Dinan Pulley this should all be done in the next few weeks... please let me know your recommendations thanks!
	Appreciate 0 Tweet Quote

05-07-2012, 04:27 PM	#2
STALKER Brigadier General 72 Rep 3,736 Posts Drives: 997.2 GT3, Golf R Join Date: Feb 2009 Location: Toronto, ON iTrader: (5)	Are you looking to get a tune, or did you already purchase the ESS Tune? I personally use Engineered Automotive usually, they are on the expensive side, but the work is always done properly. __________________ 2013 991 C4S-SOLD 2012 Golf R 2010 GT3
	Appreciate 0 Quote

05-07-2012, 06:43 PM	#3
simmsimmma Registered 1 Rep 2 Posts Drives: 2008 E92 M3 Join Date: May 2012 Location: BARRIE iTrader: (0)	I have the tune was going to do it myself and then planned on running it on a Dyno to see what else they could get out of the Motor.
	Appreciate 0 Quote

05-07-2012, 08:07 PM	#4
sawzall Major 34 Rep 1,285 Posts Drives: A Car Join Date: May 2010 Location: Toronto iTrader: (0) Garage List 2012 911S [5.00] 2011 911 GT3 RS [0.00]	I'm going to Bimmersport Automotive tomorrow in Mississauga. It'll be my first time going there. They've been really accommodating thus far. I'll post my experience with them once i'm back. They are an ESS shop but I don't know if they have a dyno.
	Appreciate 0 Quote

05-07-2012, 08:21 PM	#5
schnell325 Bored at work.... 377 Rep 4,677 Posts Drives: 2015 F80 M3//2016 F82 M4 GTS Join Date: Aug 2007 Location: Comox Valley iTrader: (7)	I don't think Bimmeraport has a dyno, but they have great long distance customer service, to say the least! __________________ Grey Matter:2008 E92 M3:608/425. SG/PS SOLD! Dark Matter:2015 F80 M3:495/505. AB/CB ? ? :2016 F82 M4 GTS --- IT IS HERE!!!
	Appreciate 0 Quote

05-07-2012, 08:38 PM	#6
dnotorious .. 15 Rep 232 Posts Drives: 2011 BMW M3 Sedan DCT Join Date: Nov 2009 Location: Mississauga, ON iTrader: (0)	My neighbour just had his car rebuilt (JDM) @ Rukus Motorsports, Toronto. He has a dyno; he can do pulls for you; but he doesnt do any specific tuning (i.e. carry hardware/software for E9x M3); for 2 pulls he will charge about $60 bucks. I was planning on getting my car dyno (for shitngiggles) and just see what kinda hp I in stock form. __________________ E90 2011 BMW M3 - DCT - Space Grey Metallic 11.4 @129mph Mods: H&R Race Springs \| StopTech BBK \| Signature Wheel SV104 \| AA Gen 2 Level 3 \| GTS DCT Tune \| Apex Stud Conversion \| MS Race X-Pipe + QTP Dual Electronic Cut-outs E90 2008 BMW M3 - 6SPD - Alpine White - Sold E90 2007 BMW 335i - 6SPD - Sparkling Graphite Metallic - Sold
	Appreciate 0 Quote

05-07-2012, 11:10 PM	#7
KJ First Lieutenant 21 Rep 385 Posts Drives: 2008 E92 M3 - Alpine White Join Date: Mar 2008 Location: Toronto iTrader: (1)	I've worked with Bimmersport before and they're great! John's a good guy. - KJ
	Appreciate 0 Quote

05-07-2012, 11:12 PM	#8
STALKER Brigadier General 72 Rep 3,736 Posts Drives: 997.2 GT3, Golf R Join Date: Feb 2009 Location: Toronto, ON iTrader: (5)	EA has a dyno. __________________ 2013 991 C4S-SOLD 2012 Golf R 2010 GT3
	Appreciate 0 Quote

07-27-2012, 10:24 PM	#12
Chriskm3 Colonel 39 Rep 2,209 Posts Drives: M3 Join Date: Jul 2012 Location: Toronto iTrader: (4)	one of the gurus from bimmersport went on his own and opened up a ashop: Located at 27 and steeles. I have used him about 3 times and i can tell you he has the know how, and talent complimanted by a cheaper price. Vroom is the company name.
	Appreciate 0 Quote

07-28-2012, 07:17 AM	#13
bobblehead Brigadier General 129 Rep 4,514 Posts Drives: warp speed Join Date: Aug 2009 Location: Toronto, On iTrader: (0)	^ can you disclose more contact info. exact address, phone #, etc.
	Appreciate 0 Quote

09-01-2012, 03:04 PM	#14
KmndntKlink Lieutenant 8 Rep 434 Posts Drives: 2010 e92 m3 Join Date: Aug 2012 Location: Toronto iTrader: (4)	I'm also looking into getting some upgrades and was looking for a shop that wasn't bmw. Anyone hear of/go to RMP motors in etobicoke? Also the reviews on google for bimmersport auto are really bad, are they baseless (claiming decrease in quality and high prices)? I heard they were supposed to be good, and they're very close for me so I'd really appreciate some advice. TIYA! __________________ E92 ///M3 in Dakar Yellow, M-DCT, iDrive, 220M OEM rims, Active Autowerke Green filter, Turner Motorsport test pipes, BPM stage 2 tune, Stoptech ST-40 F+R in yellow.
	Appreciate 0 Quote

09-07-2012, 09:22 AM	#15
Kriston The Ultimate Driving Machine 66 Rep 2,245 Posts Drives: Like Donkey Kong on Roids Join Date: Mar 2009 Location: Toronto iTrader: (4)	I would definately suggest Rocco @ RMP. He is a straight shooter, no frills just good work. __________________ CHUCK NORRIS ON WHEELS
	Appreciate 0 Quote

09-07-2012, 09:32 AM	#16
a///Mazed Private First Class 1 Rep 112 Posts Drives: 2009 IB E92 Join Date: Mar 2012 Location: Mississauga iTrader: (3)	Before I go to BMW, any reputable shops able to do the software update on our cars? http://www.m3post.com/forums/showthread.php?t=676637
	Appreciate 0 Quote

09-07-2012, 11:30 AM	#17
Giccy Captain 16 Rep 734 Posts Drives: like he has much to learn Join Date: Oct 2011 Location: Toronto iTrader: (1)	Heard good things about both Bimmersport and RMP. Had my V3s installed at RMP and Rocco is the man, for sure. No BS, just great, honest work (and he knows his shit).
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search