FORUMS
- 5
![]() |
|
![]() |
| 04-11-2012, 11:37 PM | #1 |
|
Ultimate Driver for the Ultimate Driving Machine
|
Question regarding BMW M school helmet
Hi, I have the M school helmet and it is rated SNELL 2005 approved. However there is nowhere outside or inside the helmet that states its approved. I am planning to attend my first track events and was planning on using this helmet. What happens when I take it to track and they ask me to verify its rating? What do I do?
Thanks
__________________
BMW M3 E92 - Silverstone II |
![]() |
|
| 04-12-2012, 05:35 AM | #2 |
|
OIF Veteran
Drives: ///M Join Date: Oct 2009
Location: East Coast
|
Go to the helmet company website (Impact) and look up the ratings.
http://www.impacthelmets.com/impactvelocity.html Or call them.
__________________
Retired: '06 BMW E46 ///M3
Current: '08 BMW E60 DINAN ///M5, Interlagos Blue, SMG DINAN Stage 2 Suspension, Exhaust, Stage III Software, Front strut braces, Intakes, 13% Underdrive pulley, 3.91 Differential, RPI Scoops. ![]() Last edited by MDyDinanM; 04-12-2012 at 06:57 AM. |
![]() |
|
| 04-12-2012, 08:41 AM | #3 |
|
Major
![]() |
If you lift up the padding, the Snell sticker should be on the inside against the foam shell.
__________________
![]() Current: '13 E92 M3 Euro Delivery 9/4 ![]() Wife's: E39 M5, E36 M3, E30 M3 Gone: E86 M Coupe |
|
|
|
| 04-13-2012, 01:50 AM | #5 |
|
Major
![]() Drives: '09 M3 DCT Coupe Join Date: Apr 2008
Location: Eastern Oregon... They call 'em rigs here
Posts: 1,031
iTrader: (0)
|
Yeah, I had issues with that helmet. I took it to a BMWCCA event once. The guy doing the inspection just about wouldn't let me go because there was no sticker on it. I told him where it came from and talked him into calling it good, but I didn't want to have any more problems after that so I just bought a cheap helmet that was rated and had stickers on it.
__________________
Active Autowerke filter, Dinan underdrive pulley, Dinan full exhaust and software, Dinan springs, Dinan Brakes, Dinan/HRE wheels, 275/30-19 w/10mm spacer, 295/30-19 w/3mm spacer, painted front reflectors, 30% tint, Escort 8500i & Lidar Jammer, AngeliBright halos, Euro rear foglights, 3M ClearBra.
|
|
|
|
| 04-13-2012, 08:56 AM | #6 |
|
Ultimate Driver for the Ultimate Driving Machine
|
Found it. if you remove the padding located at the back of the helmet there is a SA2010 sticker or something like that. i was expecting it to be engraved as opposed to a cheap sticker.
__________________
BMW M3 E92 - Silverstone II |
![]() |
|
![]() |
| Bookmarks |
| Thread Tools | Search this Thread |
|
|