BMW M3 Forum (E90 E92)

BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Go Back   M3Post - BMW M3 Forum > E90/E92 M3 Technical Topics > Suspension | Brakes | Chassis
 
INDustry distribution
Post Reply
 
Thread Tools Search this Thread
      04-05-2012, 09:50 PM   #1
paradocs98
Major
paradocs98's Avatar
United_States
31
Rep
1,347
Posts

 
Drives: 2014 991 Carrera S
Join Date: May 2009
Location: NY

iTrader: (0)

Anyone bevel edges of their pads?

I was just reading through some of Pagid's material online and saw that they recommend filing or beveling the leading edge of new pads at a 45 angle prior to installation for better contact/mating between pad and rotor. Does anyone do this? Easy to do? Any tips? Thanks!
Appreciate 0
      04-05-2012, 10:19 PM   #2
1MOREMOD
2014 Track Days - 11|Ridge 1:52:24|Pacific 1:35:72
1MOREMOD's Avatar
United_States
172
Rep
12,908
Posts

 
Drives: Race car->
Join Date: Mar 2009
Location: check your mirrors

iTrader: (5)

Should be a fairly easy procedure. I didn't do it but I can see how it would make sense. Big file and a vise should do it.
__________________

02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs|
Appreciate 0
      04-05-2012, 11:01 PM   #3
LiM3y
Major
LiM3y's Avatar
United Kingdom
18
Rep
1,254
Posts

 
Drives: 2008 E90 M3
Join Date: Jun 2009
Location: CT

iTrader: (3)

It is worth it for the weight reduction alone!
__________________
Appreciate 0
      04-05-2012, 11:39 PM   #4
paradocs98
Major
paradocs98's Avatar
United_States
31
Rep
1,347
Posts

 
Drives: 2014 991 Carrera S
Join Date: May 2009
Location: NY

iTrader: (0)

Quote:
Originally Posted by LiM3y View Post
It is worth it for the weight reduction alone!
Or I could just eat a couple less Oreos...
Appreciate 0
      04-05-2012, 11:58 PM   #5
1MOREMOD
2014 Track Days - 11|Ridge 1:52:24|Pacific 1:35:72
1MOREMOD's Avatar
United_States
172
Rep
12,908
Posts

 
Drives: Race car->
Join Date: Mar 2009
Location: check your mirrors

iTrader: (5)

dont do that. i love the new peanut butter ones.
__________________

02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs|
Appreciate 0
      04-06-2012, 12:14 AM   #6
tibra1
Banned
No_Country
75
Rep
6,775
Posts

 
Drives: 2011 ZCP M3 - 2007 335i crashd
Join Date: Apr 2009
Location: NYC

iTrader: (4)

The bevels are there for preventing noise, chatter, and binding
Appreciate 0
      04-06-2012, 05:47 AM   #7
LiM3y
Major
LiM3y's Avatar
United Kingdom
18
Rep
1,254
Posts

 
Drives: 2008 E90 M3
Join Date: Jun 2009
Location: CT

iTrader: (3)

Quote:
Originally Posted by paradocs98 View Post
Or I could just eat a couple less Oreos...
You have to dig deep, brother... If you read Ross Bentley's "Speed Secrets 43: Taking it from the Buffet to the Brakes", it mentions that Rahal only ate the filling, whereas Andretti didn't eat Oreos at all during the Indy season.
__________________
Appreciate 0
      04-06-2012, 07:25 AM   #8
dawgdog
Colonel
dawgdog's Avatar
28
Rep
2,177
Posts

 
Drives: 2010 Porsche GT3RS
Join Date: Oct 2006
Location: Seattle, Wa.

iTrader: (0)

I did it but with sandpaper. I had horrible binding issues with my Mintex F3Rs so was forced into it with those pads.
__________________
2015 f80 M3, 2010 GR3RS
Appreciate 0
      04-06-2012, 01:44 PM   #9
chili cheese
Captain
chili cheese's Avatar
17
Rep
960
Posts

 
Drives: '13 E92 M3, Santorini Blue
Join Date: Jul 2007
Location: Southern CA

iTrader: (6)

I have the Pagid RS19s and I noticed that they weren't beveled, but the OEM pads are. I didn't think to try to modify the Pagids and haven't had any issues yet.
Appreciate 0
      04-06-2012, 05:23 PM   #10
arter
collecting toys
arter's Avatar
8
Rep
780
Posts

 
Drives: M3 MCB
Join Date: May 2008
Location: rochester, ny

iTrader: (0)

Also have the Pagid RS-19's. Good as they are out of the box ( plus bedding in).
__________________
2011 e92 M3 Monte Carlo Blue ESS 535
2015 cayman GTS
2006 SLK 55 AMG
Appreciate 0
      04-06-2012, 08:35 PM   #11
Slapshot9
First Lieutenant
Slapshot9's Avatar
5
Rep
322
Posts

 
Drives: '08 E90 M3 JzB 6MT
Join Date: Dec 2011
Location: SoFla

iTrader: (0)

?? Are you kidding me? Seriously? Pagid can't sell a product that's ready to be installed? Binding?? Time to buy another brand of pad. My Hawks are not beveled, I throw them on and good to go. No issues.
Appreciate 0
      04-06-2012, 08:38 PM   #12
1MOREMOD
2014 Track Days - 11|Ridge 1:52:24|Pacific 1:35:72
1MOREMOD's Avatar
United_States
172
Rep
12,908
Posts

 
Drives: Race car->
Join Date: Mar 2009
Location: check your mirrors

iTrader: (5)

slow your roll. he asked if it was needed not said it was? the post before yours states they are fine without. as are most except apparently mintex.
__________________

02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs|
Appreciate 0
      04-06-2012, 11:04 PM   #13
tibra1
Banned
No_Country
75
Rep
6,775
Posts

 
Drives: 2011 ZCP M3 - 2007 335i crashd
Join Date: Apr 2009
Location: NYC

iTrader: (4)

Appreciate 0
      04-07-2012, 11:14 AM   #14
paradocs98
Major
paradocs98's Avatar
United_States
31
Rep
1,347
Posts

 
Drives: 2014 991 Carrera S
Join Date: May 2009
Location: NY

iTrader: (0)

Quote:
Originally Posted by arter View Post
Also have the Pagid RS-19's. Good as they are out of the box ( plus bedding in).
You definitely need them now that you have that little secret under the hood...
Appreciate 0
      04-07-2012, 11:17 AM   #15
paradocs98
Major
paradocs98's Avatar
United_States
31
Rep
1,347
Posts

 
Drives: 2014 991 Carrera S
Join Date: May 2009
Location: NY

iTrader: (0)

Thanks for the replies, everyone. I ended up checking with my local speed shop as well--they said filing/beveling isn't absolutely necessary, but it sometimes helps to achieve better pad-to-rotor contact sooner.
Appreciate 0
      04-07-2012, 09:56 PM   #16
JAJ
Captain
17
Rep
933
Posts

 
Drives: 2014 Shelby GT500
Join Date: Apr 2008
Location: Vancouver, BC

iTrader: (4)

Real men use square pads.
Appreciate 0
      04-08-2012, 10:05 AM   #17
arter
collecting toys
arter's Avatar
8
Rep
780
Posts

 
Drives: M3 MCB
Join Date: May 2008
Location: rochester, ny

iTrader: (0)

Quote:
Originally Posted by paradocs98 View Post
You definitely need them now that you have that little secret under the hood...
Was hitting 155 at the end of the back straight at Mid Ohio (BMW CCA) last weekend and the Pagids were working great.

Didn't do that all weekend though as I was on street tires, it was 38F and I didn't want to know why the sand trap at the end of the straight was named China Beach
__________________
2011 e92 M3 Monte Carlo Blue ESS 535
2015 cayman GTS
2006 SLK 55 AMG
Appreciate 0
      04-08-2012, 09:02 PM   #18
paradocs98
Major
paradocs98's Avatar
United_States
31
Rep
1,347
Posts

 
Drives: 2014 991 Carrera S
Join Date: May 2009
Location: NY

iTrader: (0)

Quote:
Originally Posted by arter View Post
Was hitting 155 at the end of the back straight at Mid Ohio (BMW CCA) last weekend and the Pagids were working great.

Didn't do that all weekend though as I was on street tires, it was 38F and I didn't want to know why the sand trap at the end of the straight was named China Beach
155--That's nuts! I found the following description of Mid-Ohio at http://www.na-motorsports.com/Tracks/OH/MidOhio.html. Note the description of typical speed on the straight by this Divisional Champion:

Hot Lap courtesy of Chris W. Ingle, 2003 Southeast Division T1 National Champion, #7 T1 Corvette Z06:
Overall, Mid Ohio is a very technical track and quite frankly, dangerous road course near Mansfield, Ohio. It is a handling track more so than just horsepower and has just about everything a great road course should have -- elevation changes, high speed straights (near 140 mph), fast 'pucker-factor' corners, and a few tight corners thrown in just for good measure. Extremely challenging, it takes lots and lots of seat time here to be fast. Do not expect to make drastic lap time improvements from visit to visit -- it comes in tenths of a second and sometimes hundredths. The bad part about this track though is that there is little room for error. A large part of the course is bordered by concrete walls and in some places is very close to the racing surface. You really have to pick your spots to push the limits here because the consequences are painful and expensive. Over the years, Mid Ohio has improved the safety adding more tire walls and extending the gravel traps while moving back some of the railings.

Last edited by paradocs98; 04-08-2012 at 09:14 PM.
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 01:33 PM.




m3post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST