KW Sleeve question for EDC

marksae · 03-28-2012, 02:33 PM

Good info. Sounds like it's definitely a good idea to put a few miles on the new setup before getting an alignment.

BTW, any worries about the set screw backing off the height adjustment collar?

tmntmn · 03-28-2012, 03:28 PM

Quote:

Originally Posted by CarbonFoot

Just FYI - my ride height settled by 1/4" in the front and 3/8" in the rear over the course of 3 days after installation.

How many miles did you put on it already? Since the install i only drove 5-10miles, been driving my gf's car

tmntmn · 04-02-2012, 03:30 PM

update on the stance of the car, it feels so much better then my old setup and love the stance!

alpina527 · 04-02-2012, 03:59 PM

How much damper travel have you got left. It looks like it's right on the bumps

tmntmn · 04-02-2012, 04:10 PM

Quote:

Originally Posted by alpina527

How much damper travel have you got left. It looks like it's right on the bumps

the front has 3 full turns left to max and rear has 2 full turns left to max, it had about a finger gap when i was done with the install but it settled down (lower) since the install. The pictures was taken this morning which i think the stance is perfect

j2m · 04-02-2012, 06:01 PM

Looks really good! Very nice

8-9 hours for install is pretty good for the 1st time, mine took me about 20

tmntmn · 04-02-2012, 06:24 PM

Quote:

Originally Posted by j2M3

Looks really good! Very nice

8-9 hours for install is pretty good for the 1st time, mine took me about 20

Thanks!

I had some help from my gf's brother and my dad, it was a fun learning experience.

Next is DIY BBK if i can ever afford them

OC3 · 04-02-2012, 06:43 PM

Quote:

Originally Posted by tmntmn

update on the stance of the car, it feels so much better then my old setup and love the stance!

Looks good!

tmntmn · 04-02-2012, 07:05 PM

Thanks OC3!

I want some Black ZCP rims!

edu09 · 04-02-2012, 09:51 PM

Quote:

Originally Posted by tmntmn

Thanks OC3!

I want some Black ZCP rims!

Wow man, your car looks so nice with the drop, great job!

Sean@PYSpeed.com · 04-02-2012, 10:01 PM

Looks great!

tmntmn · 04-02-2012, 10:11 PM

Quote:

Originally Posted by edu09

Quote:

Originally Posted by tmntmn

Thanks OC3!

I want some Black ZCP rims!

Wow man, your car looks so nice with the drop, great job!

Because of your help I didn't really have to play the guessing game on where to set it

Thanks again! I owe you

edu09 · 04-02-2012, 11:26 PM

Quote:

Originally Posted by tmntmn

Because of your help I didn't really have to play the guessing game on where to set it

Thanks again! I owe you

I am glad it came out so nice, the perfect drop IMO

marksae · 06-03-2012, 03:14 AM

I finally got around to start installing my KW sleeve kit. I did the fronts so far. I ended up using a press to get the stock spring perches off. I tried using a hammer, but those things were on there. My car does have 33k miles.

I also noticed my driver side shock was leaking slightly, so it's likely on its way out already. Guess i'll see how long it lasts from here on out.

SlamMan · 06-03-2012, 04:35 PM

Hopefully everyone marked the perch position on the dampers if you want to put it back to stock later.

03-28-2012, 02:33 PM	#23
marksae Private First Class Drives: ///M Join Date: Jul 2011 Location: Bay Area Posts: 152 iTrader: (1)	Good info. Sounds like it's definitely a good idea to put a few miles on the new setup before getting an alignment. BTW, any worries about the set screw backing off the height adjustment collar? __________________ 09 E90 AW ///M3 6MT 07 LBP S2K
	0

04-02-2012, 03:30 PM	#25
tmntmn Lieutenant Colonel Drives: e92 M3/M-DCT Join Date: Feb 2008 Location: Bay Area Posts: 1,825 iTrader: (6)	update on the stance of the car, it feels so much better then my old setup and love the stance! __________________ THANKS TO:~<RPM>~~<SONICMS>~ ~<MODECARBON>~ ~<McKenna Performance>~ MODS: MODE CARBON GTS FRONT LIP & REAR DIFFUSER, AA GREEN FILTER, RPI SCOOPS, PERFORMANCE STEERING WHEEL, Verstraβe Extended DCT Shifter, ZCP WHEELS (POWDER COATED),LUX V4, MTECH 6K D1S, KW SLEEVES, Megan Exhaust, ACM TP, BMS FIX, BMW LED INTERIOR Last edited by tmntmn; 04-02-2012 at 06:27 PM.
	0

04-02-2012, 06:01 PM	#28
j2m Colonel Drives: '11 E92 M3 DCT Join Date: Jun 2011 Location: Calgary, Ab Posts: 2,452 iTrader: (8) Garage List 2011 BMW E92 M3 [5.00]	Looks really good! Very nice 8-9 hours for install is pretty good for the 1st time, mine took me about 20 __________________ 11' E92 M3 Space Grey \| DCT \| ESS VT2- 625 \| Gintani Race (valved) + Quad Res Catless X-Pipe \| KW Sleeve's \| GC Camber Plates\|Arkym Diffuser \| Vorsteiner VRS Lip \| P3 Boost Guage \| Stud Conversion PHOTO's: Click Here ESS VT2 625 PHOTOS: Click Here
	0

04-02-2012, 07:05 PM	#31
tmntmn Lieutenant Colonel Drives: e92 M3/M-DCT Join Date: Feb 2008 Location: Bay Area Posts: 1,825 iTrader: (6)	Thanks OC3! I want some Black ZCP rims! __________________ THANKS TO:~<RPM>~~<SONICMS>~ ~<MODECARBON>~ ~<McKenna Performance>~ MODS: MODE CARBON GTS FRONT LIP & REAR DIFFUSER, AA GREEN FILTER, RPI SCOOPS, PERFORMANCE STEERING WHEEL, Verstraβe Extended DCT Shifter, ZCP WHEELS (POWDER COATED),LUX V4, MTECH 6K D1S, KW SLEEVES, Megan Exhaust, ACM TP, BMS FIX, BMW LED INTERIOR
	0

06-03-2012, 03:14 AM	#36
marksae Private First Class Drives: ///M Join Date: Jul 2011 Location: Bay Area Posts: 152 iTrader: (1)	I finally got around to start installing my KW sleeve kit. I did the fronts so far. I ended up using a press to get the stock spring perches off. I tried using a hammer, but those things were on there. My car does have 33k miles. I also noticed my driver side shock was leaking slightly, so it's likely on its way out already. Guess i'll see how long it lasts from here on out. __________________ 09 E90 AW ///M3 6MT 07 LBP S2K
	0

04-02-2012, 03:59 PM	#26
alpina527 Banned Drives: 2008 E92 M3 DCT JZB/FR Join Date: Jan 2010 Location: London, England Posts: 638 iTrader: (1)	How much damper travel have you got left. It looks like it's right on the bumps
	0

04-02-2012, 10:01 PM	#33
Sean@PYSpeed.com BimmerPost Supporting Vendor Drives: 2009 AW E92 M3 Join Date: Nov 2009 Location: Bay Area Posts: 8,956 iTrader: (22)	Looks great!
	0

06-03-2012, 04:35 PM	#37
SlamMan Captain Drives: ED 5/19/2010, Interlagos E90 Join Date: Sep 2009 Location: Denver, 303 Posts: 785 iTrader: (1)	Hopefully everyone marked the perch position on the dampers if you want to put it back to stock later. __________________ I play real sports. Not tryin' to be the best at exercising. - Kenny Powers
	0

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search