E60 M5 Brembos on my E92 M3?

johal89 · 03-14-2012, 03:54 AM

Someone is selling M5 E60 brembos. I was wondering if it would fit on my car. 6 piston brembos have a 380x32 size rotor same for the M3 and M5 is the caliper the same for both cars. All im asking would i have any chance of fitting it?

M3SQRD · 03-14-2012, 05:32 AM

I doubt it will be a direct bolt on for several reasons. The caliper mounting brackets are probably different. I doubt the rotor offset from the hub (i.e., design of mounting hat) and the location of the rotor pins/retaining screw are the same between the e9x M3 and e60 M5 BBKs. Also, if this BBK includes a rear caliper and rotor I doubt the design of the parking brake drum/shoe is identical to the e9x M3 parking brake design. Basically, be prepared to spend a lot of money and time fabricating custom parts to make an e60 M5 BBK fit on an e9x M3...

THE TECH · 03-14-2012, 08:39 AM

If it did fit, I would have guessed someone would have figured that out by now.

Richard@M-World · 03-14-2012, 12:58 PM

Let me confirm the calipers/brackets with Brembo.

THE TECH · 03-14-2012, 01:00 PM

Quote:

Originally Posted by Richard@M-World

Let me confirm the calipers/brackets with Brembo.

Interesting. Although unless the used kit was just a superb deal, I see no reason to jump on it.

kchu221 · 03-14-2012, 01:25 PM

hmm... if youre interested, i have a HUGE set of brembos from a 09 nissan GTR, with only 1000 miles cuz right after he bought the car, he changed out the brake kit so i decided to buy the kit from him to make it fit it on my car... but i just decided ill sell it to get me some coilovers... if youre interested let me know, im down to let it go at a really really goodprice for thiskit! this OEM kit from the dealer is 13.5K, but ill let it go for not even half the price! everything is there, all you need is a custom made braket to fit your car! ill also post up some pics later!

Richard@M-World · 03-14-2012, 06:26 PM

Update:

Front kit: very different (calipers, hats, lines, and brackets).
Rear kit: only need lines and brackets.

Snig · 03-14-2012, 08:31 PM

Quote:

Originally Posted by Richard@M-World

Update:

Front kit: very different (calipers, hats, lines, and brackets).
Rear kit: only need lines and brackets.

So, you're telling me there's a chance!?

Richard@M-World · 03-14-2012, 11:35 PM

Quote:

Originally Posted by Snig

So, you're telling me there's a chance!?

It's not cost effective to try to modify the front because the caliper is different.

But the rear is quite straightforward.

03-14-2012, 03:54 AM	#1
johal89 Private Drives: 2012 Min white E92 M3 Join Date: Feb 2012 Location: California Sf bay Posts: 53 iTrader: (0) Garage List 2012 BMW M3 [1.00]	E60 M5 Brembos on my E92 M3? Someone is selling M5 E60 brembos. I was wondering if it would fit on my car. 6 piston brembos have a 380x32 size rotor same for the M3 and M5 is the caliper the same for both cars. All im asking would i have any chance of fitting it?
	Tweet

03-14-2012, 08:39 AM	#3
THE TECH BimmerPost Supporting Vendor Drives: BPMsport 2012 E92 M3 Join Date: Jun 2011 Location: Kansas Posts: 11,884 iTrader: (39)	If it did fit, I would have guessed someone would have figured that out by now. __________________ Check us out on Facebook at BPMsportLabs

03-14-2012, 12:58 PM	#4
Richard@M-World BimmerPost Supporting Vendor Drives: NASA TTA #92 M3 Join Date: May 2011 Location: TX/IL Posts: 617 iTrader: (0)	Let me confirm the calipers/brackets with Brembo. Attached Images __________________ Authorized AiM Dealer & Data Specialist - AiM Solo \| AiM Solo DL \| AiM SmartyCam HD Authorized Pagid Brake Pads Dealer - RS19 \| RS29 \| RS14 for M3/1M OEM Calipers, StopTech, AP Racing, Alcon & Brembo w: www.m-world.us e: info@m-world.us t: 832-408-1234

03-14-2012, 06:26 PM	#7
Richard@M-World BimmerPost Supporting Vendor Drives: NASA TTA #92 M3 Join Date: May 2011 Location: TX/IL Posts: 617 iTrader: (0)	Update: Front kit: very different (calipers, hats, lines, and brackets). Rear kit: only need lines and brackets. __________________ Authorized AiM Dealer & Data Specialist - AiM Solo \| AiM Solo DL \| AiM SmartyCam HD Authorized Pagid Brake Pads Dealer - RS19 \| RS29 \| RS14 for M3/1M OEM Calipers, StopTech, AP Racing, Alcon & Brembo w: www.m-world.us e: info@m-world.us t: 832-408-1234

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

03-14-2012, 05:32 AM	#2
M3SQRD Colonel Drives: E92 M3s, R56 Cooper S Join Date: Jun 2009 Location: EC Posts: 2,347 iTrader: (2)	I doubt it will be a direct bolt on for several reasons. The caliper mounting brackets are probably different. I doubt the rotor offset from the hub (i.e., design of mounting hat) and the location of the rotor pins/retaining screw are the same between the e9x M3 and e60 M5 BBKs. Also, if this BBK includes a rear caliper and rotor I doubt the design of the parking brake drum/shoe is identical to the e9x M3 parking brake design. Basically, be prepared to spend a lot of money and time fabricating custom parts to make an e60 M5 BBK fit on an e9x M3...

03-14-2012, 01:25 PM	#6
kchu221 JDM whore Drives: 2012 E92 6MT Space Grey Join Date: Jan 2012 Location: los angeles Posts: 2,269 iTrader: (5)	hmm... if youre interested, i have a HUGE set of brembos from a 09 nissan GTR, with only 1000 miles cuz right after he bought the car, he changed out the brake kit so i decided to buy the kit from him to make it fit it on my car... but i just decided ill sell it to get me some coilovers... if youre interested let me know, im down to let it go at a really really goodprice for thiskit! this OEM kit from the dealer is 13.5K, but ill let it go for not even half the price! everything is there, all you need is a custom made braket to fit your car! ill also post up some pics later!