FORUMS
- 5
![]() |
|
![]() |
| 02-20-2012, 09:23 PM | #1 |
|
drop a gear and...
Drives: 2010 M3 Join Date: Mar 2011
Location: Houston, TX
|
FS: Brembo GT 380mm Drilled BBK in Candy Apple Red
These will be off of the car in a day or so and I will post pictures then. Brembo GT 380mm Drilled BBK in Candy Apple Red for the E9x M3. This kit is 380 front and rear with six piston front calipers and 4 piston rear calipers. The brakes are in great condition and only about 6 months old with less than 2500 miles on them. One caliper has a scratch on the back where a rock got wedged in between the caliper and the wheel. Absolutely no issues with the brakes and the finish is in really good shape. The front pads will not be included because they are thin but the rear pads are practically new. All hardware is included and the brakes will be shipped in the original Brembo boxes. SOLD Note: Redundant pictures were done on the white paper to show the true color. You can also see pictures of them on my car if you look in my "garage". I also measured the rotors - the fronts are 33.5mm and the rears are 27.93. All rotors are smooth and even. ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
__________________
Last edited by disapr; 02-26-2012 at 09:31 AM. |
![]() |
|
| 02-20-2012, 09:36 PM | #2 |
|
BimmerPost Supporting Vendor
![]() |
380 front & rear?
__________________
|
![]() |
|
| 02-20-2012, 09:41 PM | #3 |
|
drop a gear and...
Drives: 2010 M3 Join Date: Mar 2011
Location: Houston, TX
|
__________________
|
![]() |
|
| 02-20-2012, 09:42 PM | #4 |
|
BimmerPost Supporting Vendor
![]() |
So it's just a feeler or are they really for sale? Did you track them? Are you the original owner? Why are the pads dead at only 2500 miles?
__________________
|
![]() |
|
| 02-21-2012, 09:29 AM | #5 |
|
drop a gear and...
Drives: 2010 M3 Join Date: Mar 2011
Location: Houston, TX
|
They are for sale - edited the title.
I bought them new from RennSpec and since then they have been used for a handful of HPDE's thus the used up front pads. The rotors measure within spec and there are no issues. I'm only selling them due to selling the car, the brakes are one of my favorite upgrades to the car.
__________________
|
![]() |
|
| 02-21-2012, 09:30 AM | #6 |
|
BimmerPost Supporting Vendor
![]() |
Any new pics?
__________________
|
![]() |
|
| 02-21-2012, 09:35 AM | #7 |
|
drop a gear and...
Drives: 2010 M3 Join Date: Mar 2011
Location: Houston, TX
|
Not yet. I will try to have pics up tomorrow.
The calipers look great though, I use ReverseLogic wheel tools to pull my wheels and hand wash the calipers every time that I wash the car so they have been taken care of.
__________________
|
![]() |
|
| 02-21-2012, 09:37 AM | #8 |
|
BimmerPost Supporting Vendor
![]() |
Sounds good.
__________________
|
![]() |
|
| 02-21-2012, 10:01 AM | #9 |
|
Second Lieutenant
![]() |
Good luck. great kit!!
__________________
![]() | ADV.1 10.01SL | MORR MF52 | ESS VT1 SUPERCHARGER w/ upgraded pulley |ROTORA 6/4 BBK | KW S/O KIT | RDSPORT SWAYS | MEISTERSCHAFT GT EXHAUST | GITANI XPIPE | VORSTEINER TRUNK | MODE CARBON FRONT LIP | PLATTE FORME CARBON SIDE SKIRTS | CIC CONVERSION |ONEighty CUSTOM HEADLIGHTS | JEHNERT DOOR PANELS | RAINBOW AUDIO | HELIX PSD | BMW PSW w/led | RECARO SPORTSTERS | |
![]() |
|
| 02-21-2012, 12:16 PM | #12 |
|
drop a gear and...
Drives: 2010 M3 Join Date: Mar 2011
Location: Houston, TX
|
It's a custom color. I was told at least that the shop that painted then is the official shop that Brembo uses in the states for color changes. Either way, the paint is really hard and smooth and hasn't changed color at all from use/heat.
__________________
|
![]() |
|
| 02-21-2012, 02:25 PM | #13 | |
|
drop a gear and...
Drives: 2010 M3 Join Date: Mar 2011
Location: Houston, TX
|
Quote:
These were over 7k new so this is a deal for someone seeing that they are in really good condition.
__________________
|
|
![]() |
|
| 02-22-2012, 09:34 PM | #14 |
|
drop a gear and...
Drives: 2010 M3 Join Date: Mar 2011
Location: Houston, TX
|
Brakes are off.. Pictures coming soon.
__________________
|
![]() |
|
| 02-23-2012, 11:44 AM | #15 |
|
drop a gear and...
Drives: 2010 M3 Join Date: Mar 2011
Location: Houston, TX
|
Pictures posted in post #1
__________________
|
![]() |
|
| 02-23-2012, 11:57 AM | #17 |
|
BimmerPost Supporting Vendor
![]() |
Someone will be getting a good deal for sure. Just too close to my cost new for me to bite.
for a good seller!
__________________
|
![]() |
|
| 02-23-2012, 12:18 PM | #18 |
|
tha_good_life
Drives: 2010 JzB E92 M3 Join Date: Jul 2008
Location: Seattle
|
Damn, these are SICK!
BUMP for the good seller! |
![]() |
|
| 02-23-2012, 12:32 PM | #19 |
|
e90post veteran
Drives: '12 M3, '09 335, '11 Mini R56 Join Date: Jul 2011
Location: central NJ
Posts: 1,373
iTrader: (4)
|
God I want these so bad. But unless you are looking for a trade for some parts plus cash, I don't have the money right now
![]()
__________________
2012 Melbourne Red/Bamboo Novillo E92 M3 - ZCP, ZPP, DCT, BMW Apps, Sat Radio, Heated Seats
Mods- 20" BBS LM DBK, 18" Volk TE37SL, OSS, Arkym, RD Sport, and much more... Thanks to- PYSpeed -- Morr Wheels -- OSS Designs -- iND-Distribution |
![]() |
|
| 02-23-2012, 08:43 PM | #21 |
|
SMYLMKR
Drives: 2011 E90 M3, 1988 M3, 2007 X3 Join Date: Oct 2006
Location: Oklahoma City, OK
Posts: 1,316
iTrader: (7)
Garage List 1988 BMW M3 [4.70]
1990 BMW M3 [5.00] 2011 BMW M3 Sedan [4.64] 1998 BMW M3/4 - sol ... [0.00] 2008 BMW 135i - sold [0.00] 2003 BMW M3 - sold [0.00] |
Oh man those would look good on my car!! Rotors are drilled and slotted, correct? Can the discolored Brembo sticker just be replaced or is it under the clearcoat?
__________________
2011 E90 M3 - Alpine White/Fox Red Extended/Carbon Leather
Premium/Convenience/Cold Weather Package - Competition Package - M-DCT - Sunshades - EPS - BMW Apps - Sat Radio - Ipod/USB |
![]() |
|
| 02-23-2012, 09:32 PM | #22 | |
|
drop a gear and...
Drives: 2010 M3 Join Date: Mar 2011
Location: Houston, TX
|
Quote:
You could probably send the caliper with the discolored logo back to the shop that painted them and have it swapped out. It's under the clear coat but again, it should be possible. And these would look really good on your car, especially with those wheels!
__________________
|
|
![]() |
|
![]() |
| Bookmarks |
| Thread Tools | Search this Thread |
|
|