BMW M3 Forum (E90 E92)

BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Go Back   M3Post - BMW M3 Forum > E90/E92 M3 Technical Topics > Engine, Transmission, Exhaust, Drivetrain, ECU Software Modifications
 
PYSPEED
Post Reply
 
Thread Tools Search this Thread
      02-08-2012, 10:29 PM   #1
SSkelton
Registered
 
Drives: 2008 M3 Sedan
Join Date: Feb 2012
Location: Lufkin, Texas

Posts: 4
iTrader: (0)

Reason for Oil Use

I just had to put a quart of oil in my engine for the first time since I owned the car. I had read that this is necessary. However, I was wondering why this is.
I'm new to the site so don't flame me. I'm sure there is an simple answer as to why the engine is designed to use oil. I just want to know the reason.

Thanks
SSkelton is offline  
0
Reply With Quote
      02-09-2012, 01:22 AM   #2
blackbeast535
Private First Class
 
blackbeast535's Avatar
 
Drives: 2008 M3 6MT Jerez Black
Join Date: Aug 2011
Location: MD

Posts: 144
iTrader: (0)

Here:

http://www.m3post.com/forums/showthr...il+consumption
__________________


E90 M3 Jerez Black/Bamboo Beige 6MT - BMW CCA
Dinan Rear Exhaust, Secondary Cat Delete, Dinan High Flow Carbon Fiber Intake, IND Painted Reflectors, BMW Edition Grills
blackbeast535 is offline   United_States
0
Reply With Quote
      02-09-2012, 10:04 AM   #3
Sean05
Putcha ang ganda...
 
Sean05's Avatar
 
Drives: 08 MR E92 M3
Join Date: Feb 2010
Location: Los Angeles, Brea CA.

Posts: 5,331
iTrader: (9)

Send a message via Yahoo to Sean05
no reason... our cars just drinks oil period.... LOL

i put 1 qtz of oil every 7-8k miles.. some add 3-5... depends on how you drive...

always carry a qtz in the trunk just incase...
__________________
Sean05 is offline   Philippines
0
Reply With Quote
      02-09-2012, 02:31 PM   #4
M3PO
Colonel
 
M3PO's Avatar
 
Drives: '08 IB E92
Join Date: Sep 2011
Location: OC

Posts: 2,738
iTrader: (7)

Here's a post that I wrote in the thread posted above that explains the technical reasons for oil consumption:

Quote:
Originally Posted by M3PO View Post
Oil consumption is caused by a few different things.

One of them is blowby. Expanding gases in the combustion chamber blow past the piston rings and entrain some of the oil lubricating the rings. This oily blowby is then evacuated from the crankcase by the PCV system and returned to the intake system; the oil is then burned in the combustion chamber.

Reverse gas flow is another one. During evacuation of the cylinder during the exhaust stroke, the cylinder pressure is actually lower than the pressure between the first and second piston rings. This causes a reverse flow of gas into the cylinder and it "sucks" some of the oil in liquid and/or vapor from the piston ring system into the cylinder.

Oil is also consumed as acceleration and deceleration of the piston throws oil from the top ring land into the combustion chamber. This is called "throw-off". Throw-off type oil consumption is worst at low loads.

In a similar way, aggressive driving can cause increased oil evaporation from the top ring land. Consumption due to evaporation also takes place at the cylinder liner. It's magnitude is highly dependent upon oil composition.

In older engines, there was some oil leakage from the valve guides but newer valve seal designs have virtually eliminated that as a source of oil consumption.
M3PO is offline  
0
Reply With Quote
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 07:27 AM.




m3post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST