BMW M3 Forum (E90 E92)

BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Go Back   M3Post - BMW M3 Forum > E90/E92 M3 Technical Topics > DIY Guides/ Discussions
 
BPM Sport
Post Reply
 
Thread Tools Search this Thread
      11-25-2011, 09:14 AM   #23
GIdriver
Major
GIdriver's Avatar
United_States
17
Rep
1,353
Posts

 
Drives: 2014 E63 AMG-S
Join Date: Dec 2010
Location: Somewhere in Time

iTrader: (0)

Quote:
Originally Posted by scottEdog1 View Post
6) Tape very thin and log flat head screw driver with electrical tape. Now once done insert and begin squeezing the outer most set of clips on the gill light harness which we are replacing working those out first from that outer end of the gill to the front of the car.

TIP: push the screw driver in slightly behind the front edge to grip the light harness and by NOT putting pressure against the outer car body and paint, help grip and pull the harness out by unclipping each set of clips down the line of the harness body from right to left- this on my car was slightly difficult and took 20 mins on the drivers side including breaking the last clip down the line. As you pinch together the harnesses top and bottom clip sets together work the screwdriver to pull hard out ward at the same time.
Another tip: Put double sided tape WITH THE PLASTIC COVER STILL IN PLACE at the edge of the gill housing where it is most likely to recieve the pressure from the screwdiver to prevent paint damage. I didn't on the first gill and scratched the paint a bit. Just my 2 cents.
Appreciate 0
      04-03-2013, 07:05 PM   #24
Dominic_M
Second Lieutenant
Dominic_M's Avatar
2
Rep
251
Posts

 
Drives: 08 ///M3
Join Date: Feb 2009
Location: Atlanta, GA

iTrader: (0)

Lots of peps with great ideas giving the op a hard time. I have an e90 and it is not as easy as some think. Any videos or pics will be great from some of the pros...
__________________
2008 E90 M3 SPARKLING GRAPHITE METALLIC
Appreciate 0
      04-04-2013, 03:55 AM   #25
dagolfpro
Lieutenant Colonel
dagolfpro's Avatar
Taiwan
30
Rep
1,913
Posts

 
Drives: 2011 E90 M3
Join Date: Sep 2011
Location: SF Bay Area, CA

iTrader: (9)

Many of my friends who own e92 have tried to help me change my e90 and failed. e92 is much easier to swap out. I still haven't changed mine yet due to this issue.
__________________
2011 E90 AW | DCT | ZCP | ZCV | ZCW | ZP2 | Prem Sound | Moonroof | BMW Apps |
Evolve Exhaust | M Perf Steering Wheel | Tint | Lux | Painted Reflectors | Hardwired V1 | KW V3 | Volshlag CP | Brembo BBK | 18" Volks TE37SL Pressed Graphite | Yokohama AD08 | Schroth 4 Point Harness | Challenge GT Diffuser | I lied earlier, I wasn't done with mod, but I swear, I'm done now, no more mods...

Last edited by dagolfpro; 04-04-2013 at 10:09 AM.
Appreciate 0
      04-04-2013, 08:46 AM   #26
faith&firepower
Granny Shifting, Not Double Clutching Like You
faith&firepower's Avatar
San Marino
1
Rep
104
Posts

 
Drives: 2008 M3 Sedan
Join Date: Aug 2012
Location: Back in MI

iTrader: (0)

Quote:
Originally Posted by Dominic_M View Post
Lots of peps with great ideas giving the op a hard time. I have an e90 and it is not as easy as some think. Any videos or pics will be great from some of the pros...
I used zip ties to get around the back of the marker through the mesh. Popped right out in 5 sec., no damage. Its actually how to remove them if anyone had access to ALLDATA.
__________________
08' E90 M3 - Not Enough Mods To List....
Appreciate 0
      04-04-2013, 10:09 AM   #27
dagolfpro
Lieutenant Colonel
dagolfpro's Avatar
Taiwan
30
Rep
1,913
Posts

 
Drives: 2011 E90 M3
Join Date: Sep 2011
Location: SF Bay Area, CA

iTrader: (9)

Quote:
Originally Posted by faith&firepower View Post
I used zip ties to get around the back of the marker through the mesh. Popped right out in 5 sec., no damage. Its actually how to remove them if anyone had access to ALLDATA.
Any chance you have pics of where you inserted the zip ties? I never would have thought of this but it totally makes sense.
__________________
2011 E90 AW | DCT | ZCP | ZCV | ZCW | ZP2 | Prem Sound | Moonroof | BMW Apps |
Evolve Exhaust | M Perf Steering Wheel | Tint | Lux | Painted Reflectors | Hardwired V1 | KW V3 | Volshlag CP | Brembo BBK | 18" Volks TE37SL Pressed Graphite | Yokohama AD08 | Schroth 4 Point Harness | Challenge GT Diffuser | I lied earlier, I wasn't done with mod, but I swear, I'm done now, no more mods...
Appreciate 0
      04-04-2013, 02:59 PM   #28
faith&firepower
Granny Shifting, Not Double Clutching Like You
faith&firepower's Avatar
San Marino
1
Rep
104
Posts

 
Drives: 2008 M3 Sedan
Join Date: Aug 2012
Location: Back in MI

iTrader: (0)

I did mine about a year ago. I used two, one at the front, one at the rear of the side marker and used equal force as to not snap the tabs.
__________________
08' E90 M3 - Not Enough Mods To List....
Appreciate 0
      04-04-2013, 02:59 PM   #29
faith&firepower
Granny Shifting, Not Double Clutching Like You
faith&firepower's Avatar
San Marino
1
Rep
104
Posts

 
Drives: 2008 M3 Sedan
Join Date: Aug 2012
Location: Back in MI

iTrader: (0)

I did mine about a year ago. I used two, one at the front, one at the rear of the side marker and used equal force as to not snap the tabs.
__________________
08' E90 M3 - Not Enough Mods To List....
Appreciate 0
      04-04-2013, 02:59 PM   #30
faith&firepower
Granny Shifting, Not Double Clutching Like You
faith&firepower's Avatar
San Marino
1
Rep
104
Posts

 
Drives: 2008 M3 Sedan
Join Date: Aug 2012
Location: Back in MI

iTrader: (0)

I did mine about a year ago. I used two, one at the front, one at the rear of the side marker and used equal force as to not snap the tabs.
__________________
08' E90 M3 - Not Enough Mods To List....
Appreciate 0
      04-04-2013, 02:59 PM   #31
faith&firepower
Granny Shifting, Not Double Clutching Like You
faith&firepower's Avatar
San Marino
1
Rep
104
Posts

 
Drives: 2008 M3 Sedan
Join Date: Aug 2012
Location: Back in MI

iTrader: (0)

I did mine about a year ago. I used two, one at the front, one at the rear of the side marker and used equal force as to not snap the tabs.
__________________
08' E90 M3 - Not Enough Mods To List....
Appreciate 0
      04-04-2013, 02:59 PM   #32
faith&firepower
Granny Shifting, Not Double Clutching Like You
faith&firepower's Avatar
San Marino
1
Rep
104
Posts

 
Drives: 2008 M3 Sedan
Join Date: Aug 2012
Location: Back in MI

iTrader: (0)

I did mine about a year ago. I used two, one at the front, one at the rear of the side marker and used equal force as to not snap the tabs.
__________________
08' E90 M3 - Not Enough Mods To List....
Appreciate 0
      04-04-2013, 02:59 PM   #33
faith&firepower
Granny Shifting, Not Double Clutching Like You
faith&firepower's Avatar
San Marino
1
Rep
104
Posts

 
Drives: 2008 M3 Sedan
Join Date: Aug 2012
Location: Back in MI

iTrader: (0)

I did mine about a year ago. I used two, one at the front, one at the rear of the side marker and used equal force as to not snap the tabs.
__________________
08' E90 M3 - Not Enough Mods To List....
Appreciate 0
      04-04-2013, 02:59 PM   #34
faith&firepower
Granny Shifting, Not Double Clutching Like You
faith&firepower's Avatar
San Marino
1
Rep
104
Posts

 
Drives: 2008 M3 Sedan
Join Date: Aug 2012
Location: Back in MI

iTrader: (0)

I did mine about a year ago. I used two, one at the front, one at the rear of the side marker and used equal force as to not snap the tabs.
__________________
08' E90 M3 - Not Enough Mods To List....
Appreciate 0
      04-04-2013, 03:38 PM   #35
Lerxst M3
Command Sergeant Major of the Army
Lerxst M3's Avatar
5
Rep
167
Posts

 
Drives: 08 6MT SSII
Join Date: Mar 2012
Location: Houston / Pearland

iTrader: (2)

Quote:
Originally Posted by faith&firepower View Post
I did mine about a year ago. I used two, one at the front, one at the rear of the side marker and used equal force as to not snap the tabs.
Holy multiple posts, Batman!

edited to add: But good post. I will be using this method when I change mine out!
__________________
Chris
Houston area
'08 6MT SSII


Last edited by Lerxst M3; 04-04-2013 at 03:52 PM.
Appreciate 0
      04-08-2013, 02:04 AM   #36
dagolfpro
Lieutenant Colonel
dagolfpro's Avatar
Taiwan
30
Rep
1,913
Posts

 
Drives: 2011 E90 M3
Join Date: Sep 2011
Location: SF Bay Area, CA

iTrader: (9)

Quote:
Originally Posted by faith&firepower View Post
I did mine about a year ago. I used two, one at the front, one at the rear of the side marker and used equal force as to not snap the tabs.
I tried this, couldn't get the zip tie underneath it. Can you take a picture of where you inserted the zip ties?
__________________
2011 E90 AW | DCT | ZCP | ZCV | ZCW | ZP2 | Prem Sound | Moonroof | BMW Apps |
Evolve Exhaust | M Perf Steering Wheel | Tint | Lux | Painted Reflectors | Hardwired V1 | KW V3 | Volshlag CP | Brembo BBK | 18" Volks TE37SL Pressed Graphite | Yokohama AD08 | Schroth 4 Point Harness | Challenge GT Diffuser | I lied earlier, I wasn't done with mod, but I swear, I'm done now, no more mods...
Appreciate 0
      05-15-2013, 01:40 AM   #37
M3ANMACHINE
Hella Functional
M3ANMACHINE's Avatar
United_States
24
Rep
1,776
Posts

 
Drives: 2008 E90 M3
Join Date: Jan 2010
Location: Mission Viejo, CA

iTrader: (6)

Quote:
Originally Posted by dagolfpro View Post
I tried this, couldn't get the zip tie underneath it. Can you take a picture of where you inserted the zip ties?
through the mesh I believe. I will likely do this soon as my stickers are beat up and need replacing!
__________________

--- E90 ///M3 - AW - 6MT - APEX - Bimmerworld - Dinan - Eisenmann - Evolve - IND - KW - Mode Carbon - PFC - TMS ---

Appreciate 0
      05-15-2013, 01:46 AM   #38
dagolfpro
Lieutenant Colonel
dagolfpro's Avatar
Taiwan
30
Rep
1,913
Posts

 
Drives: 2011 E90 M3
Join Date: Sep 2011
Location: SF Bay Area, CA

iTrader: (9)

Quote:
Originally Posted by M3ANMACHINE View Post
through the mesh I believe. I will likely do this soon as my stickers are beat up and need replacing!
no worries, i took it to a shop that does them all the time. they took them off in less than 5 minutes for both. they wouldn't show me how they did it though...
__________________
2011 E90 AW | DCT | ZCP | ZCV | ZCW | ZP2 | Prem Sound | Moonroof | BMW Apps |
Evolve Exhaust | M Perf Steering Wheel | Tint | Lux | Painted Reflectors | Hardwired V1 | KW V3 | Volshlag CP | Brembo BBK | 18" Volks TE37SL Pressed Graphite | Yokohama AD08 | Schroth 4 Point Harness | Challenge GT Diffuser | I lied earlier, I wasn't done with mod, but I swear, I'm done now, no more mods...
Appreciate 0
      05-15-2013, 01:54 AM   #39
M3ANMACHINE
Hella Functional
M3ANMACHINE's Avatar
United_States
24
Rep
1,776
Posts

 
Drives: 2008 E90 M3
Join Date: Jan 2010
Location: Mission Viejo, CA

iTrader: (6)

Quote:
Originally Posted by dagolfpro View Post
no worries, i took it to a shop that does them all the time. they took them off in less than 5 minutes for both. they wouldn't show me how they did it though...
lol.. that's rather odd
__________________

--- E90 ///M3 - AW - 6MT - APEX - Bimmerworld - Dinan - Eisenmann - Evolve - IND - KW - Mode Carbon - PFC - TMS ---

Appreciate 0
      05-15-2013, 01:59 AM   #40
dagolfpro
Lieutenant Colonel
dagolfpro's Avatar
Taiwan
30
Rep
1,913
Posts

 
Drives: 2011 E90 M3
Join Date: Sep 2011
Location: SF Bay Area, CA

iTrader: (9)

Quote:
Originally Posted by M3ANMACHINE View Post
lol.. that's rather odd
They said only shop employees where allowed in the shop area. i didn't bother to ask how they did it when they said that.
__________________
2011 E90 AW | DCT | ZCP | ZCV | ZCW | ZP2 | Prem Sound | Moonroof | BMW Apps |
Evolve Exhaust | M Perf Steering Wheel | Tint | Lux | Painted Reflectors | Hardwired V1 | KW V3 | Volshlag CP | Brembo BBK | 18" Volks TE37SL Pressed Graphite | Yokohama AD08 | Schroth 4 Point Harness | Challenge GT Diffuser | I lied earlier, I wasn't done with mod, but I swear, I'm done now, no more mods...
Appreciate 0
      05-22-2013, 12:00 PM   #41
ms2bmw
New Member
0
Rep
15
Posts

 
Drives: M3
Join Date: Apr 2013
Location: NorCal

iTrader: (0)

Quote:
Originally Posted by dagolfpro View Post
They said only shop employees where allowed in the shop area. i didn't bother to ask how they did it when they said that.
Which shop is this? May have mine installed by these guys if cost is reasonable.
Appreciate 0
      05-22-2013, 12:04 PM   #42
dagolfpro
Lieutenant Colonel
dagolfpro's Avatar
Taiwan
30
Rep
1,913
Posts

 
Drives: 2011 E90 M3
Join Date: Sep 2011
Location: SF Bay Area, CA

iTrader: (9)

Quote:
Originally Posted by ms2bmw View Post
Which shop is this? May have mine installed by these guys if cost is reasonable.
Sonic in Mt. View

Do you have E90 or E92/3. If it's the E92/3, it's a simple, pull it out while applying force. E90, not the same...
__________________
2011 E90 AW | DCT | ZCP | ZCV | ZCW | ZP2 | Prem Sound | Moonroof | BMW Apps |
Evolve Exhaust | M Perf Steering Wheel | Tint | Lux | Painted Reflectors | Hardwired V1 | KW V3 | Volshlag CP | Brembo BBK | 18" Volks TE37SL Pressed Graphite | Yokohama AD08 | Schroth 4 Point Harness | Challenge GT Diffuser | I lied earlier, I wasn't done with mod, but I swear, I'm done now, no more mods...
Appreciate 0
      05-22-2013, 12:15 PM   #43
ms2bmw
New Member
0
Rep
15
Posts

 
Drives: M3
Join Date: Apr 2013
Location: NorCal

iTrader: (0)

Thanks. Have an E90 and it is a pain to pull it out.
Appreciate 0
      05-22-2013, 02:20 PM   #44
whats77inaname
Native Texan
United_States
54
Rep
1,874
Posts

 
Drives: when at all possible
Join Date: Aug 2011
Location: Tx

iTrader: (16)

I have an E90, and it took me 5 mins to do this, it's not that difficult. I do believe there's another thread about removal for the E90 that I utilized which negated having to lift the car, etc.

Ah, here we go:

http://www.m3post.com/forums/showthread.php?t=229037

From that thread:

http://www.m3post.com/forums/showpos...2&postcount=68
__________________


Not stock.

Last edited by whats77inaname; 05-22-2013 at 02:35 PM. Reason: found referenced links
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 11:09 PM.




m3post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST