M Performance Style Carbon Splitters on Ebay?

Vancouver_M3 · 11-01-2011, 01:17 AM

Out of curiousity I searched on Ebay for OEM carbon splitters and found a replica of them from a China manufacturer also in carbon. Auction pics looked legit and the product appears high quality. I asked a friend in Asia what he thought of them and he said that once on the car, they look as good as factory. Since the splitters are mainly cosmetic (re: I don't go fast enough to notice a difference) I am not too concerned if its 100% carbon fiber and resin or a wrap of a fiberglass core and resin. At least, on the surface, the finish appears authentic. The price difference is certainly staggering. Anyone else tried these ones? Ebay link here: http://cgi.ebay.com/ws/eBayISAPI.dll...#ht_5245wt_905

eclipsisNA · 11-01-2011, 03:30 PM

My OEM splitters recently got cracked from going up a steep driveway, so I didn't want to spend another $700 on something that will likely get broken again. I went with the ones linked to below, and the quality is fantastic for the price. Fitment is 100%, which I was shocked to see. I was expecting some flaws in the fitment, but there are none to be found. Quality is about 95%, with some distortions in the weave on the underside, but you'll never see that part of the splitter so it doesn't matter.

They're a tremendous value. I've been adamant in the past about not buying replicas, but on a part that is going to likely get scratched/cracked over time, I had to go with the replicas. Also, shipping was extremely fast from this vendor considering it's coming from China. Took 2 business days to get to SoCal.

http://www.ebay.com/itm/150526759550

kmarei · 11-01-2011, 07:45 PM

Quote:

Originally Posted by Eclipsis

My OEM splitters recently got cracked from going up a steep driveway, so I didn't want to spend another $700 on something that will likely get broken again. I went with the ones linked to below, and the quality is fantastic for the price. Fitment is 100%, which I was shocked to see. I was expecting some flaws in the fitment, but there are none to be found. Quality is about 95%, with some distortions in the weave on the underside, but you'll never see that part of the splitter so it doesn't matter.

They're a tremendous value. I've been adamant in the past about not buying replicas, but on a part that is going to likely get scratched/cracked over time, I had to go with the replicas. Also, shipping was extremely fast from this vendor considering it's coming from China. Took 2 business days to get to SoCal.

http://www.ebay.com/itm/150526759550

You know the rules
Pics or ban

isugoo · 11-01-2011, 11:09 PM

Quote:

Originally Posted by kmarei

You know the rules
Pics or ban

+1

Ken37.73 · 11-02-2011, 04:50 AM

+1 I've been hovering above Buy It Now since I saw your post. Thanks would really appreciate a pic ......

Sean05 · 11-02-2011, 09:26 AM

WOW more ebays stuff... seems like they are getting better.... i will be ordering an xpipe from ebay and now this... hmmmm very interesting... LOL

eclipsisNA · 11-02-2011, 07:42 PM

Quote:

Originally Posted by kmarei

You know the rules
Pics or ban

Here you go:

geneatals · 11-03-2011, 11:13 AM

it that the angle/a shadow, or does the passenger side splitter not contact the bumper on the inner/middle side?

MusclezMarinara · 11-03-2011, 11:45 AM

There pretty spot on but not 100% id say 92%
If you want real OEMs PM me

shay2nak · 11-03-2011, 11:58 AM

look how straight the weave is on the OEM part. that should be the giveaway.

I don't understand why they have to copy EVERY *FUCKING* THING. MAKE YOUR OWN SHIT!

MusclezMarinara · 11-03-2011, 12:01 PM

Quote:

Originally Posted by shay2nak

look how straight the weave is on the OEM part. that should be the giveaway.

I don't understand why they have to copy EVERY *FUCKING* THING. MAKE YOUR OWN SHIT!

eeettsss how we make daa moonniieeees

china voice

eclipsisNA · 11-03-2011, 03:06 PM

Quote:

Originally Posted by geneatals

it that the angle/a shadow, or does the passenger side splitter not contact the bumper on the inner/middle side?

That's how it is, but that's only because we used double-sided tape on the passenger side, so it sticks out a little more than Betalink.

After looking at my pics there is distortion on the top of the China splitter. In person it is hardly noticeable, you'd have to look at it up close to see any irregularity.

Vancouver_M3 · 11-03-2011, 03:50 PM

Thanks for the response to my thread. The pics are very helpful in judging quality especially when u have the factory one on one side. I think if you had both on I probably wouldn't have noticed. I suppose if I was to get it I would buy a betalink kit and mount like the factory one and it would fit closer. I can see where it doesn't quite line up but like you said its probably cause of the tape. Did the double sided tape come with the part? From a quality standpoint, the factory one has a lot more visual continuity with the lines of the car as the pattern runs front to back rather than some arbitrary angle. Does the right side one go the opposite direction so both sides at least look mirrored?

Brucewonder · 11-03-2011, 09:38 PM

you gotta admit...for $200 vs $650, its pretty damm good

Chowster · 11-04-2011, 12:24 AM

Quote:

Originally Posted by Vancouver_M3

Thanks for the response to my thread. The pics are very helpful in judging quality especially when u have the factory one on one side. I think if you had both on I probably wouldn't have noticed. I suppose if I was to get it I would buy a betalink kit and mount like the factory one and it would fit closer. I can see where it doesn't quite line up but like you said its probably cause of the tape. Did the double sided tape come with the part? From a quality standpoint, the factory one has a lot more visual continuity with the lines of the car as the pattern runs front to back rather than some arbitrary angle. Does the right side one go the opposite direction so both sides at least look mirrored?

I have OEM splitters mounted with 3M tape. There's no gap if you place the tape slightly away from the edge, maybe 3-4mm. I don't think using Betalink vs. 3M tape will make a difference in fitment.

bigjae1976 · 11-04-2011, 08:41 AM

I've been through about 5 sets of clubsport splitters on my E46...I usually like sticking ith OEM but this part would be the exception.

SamS · 11-04-2011, 09:14 AM

Quote:

Originally Posted by Chowster

I have OEM splitters mounted with 3M tape. There's no gap if you place the tape slightly away from the edge, maybe 3-4mm. I don't think using Betalink vs. 3M tape will make a difference in fitment.

I'd be more inclined to use Betalink, but let's say you crack/break/curb a splitter attached with Betalink. Wouldn't it be much hard to remove when (if) you need to replace it?

Chowster · 11-04-2011, 03:27 PM

Quote:

Originally Posted by SamS

I'd be more inclined to use Betalink, but let's say you crack/break/curb a splitter attached with Betalink. Wouldn't it be much hard to remove when (if) you need to replace it?

I would assume so - never had to remove something before. That's why I taped mine.

stefan · 11-04-2011, 03:33 PM

Quote:

Originally Posted by Eclipsis

My OEM splitters recently got cracked from going up a steep driveway, so I didn't want to spend another $700 on something that will likely get broken again. I went with the ones linked to below, and the quality is fantastic for the price. Fitment is 100%, which I was shocked to see. I was expecting some flaws in the fitment, but there are none to be found. Quality is about 95%, with some distortions in the weave on the underside, but you'll never see that part of the splitter so it doesn't matter.

They're a tremendous value. I've been adamant in the past about not buying replicas, but on a part that is going to likely get scratched/cracked over time, I had to go with the replicas. Also, shipping was extremely fast from this vendor considering it's coming from China. Took 2 business days to get to SoCal.

http://www.ebay.com/itm/150526759550

Passenger side doesn't even extend all the way to the end in their ebay photos.. is that how they are IRL?

ProfessionalPro · 08-17-2012, 06:13 PM

I've seen a few of these on ebay as well but there's a group buy site ive been using for a couple months, they just listed the M3 splitters.

http://massdrop.com/bmw-e9x-m3-carbon-fiber-splitter

I've heard of fit issues like this before, was there one solution allot of you guys found works best?

11-01-2011, 01:17 AM	#1
Vancouver_M3 Private Drives: 2011 M3 Sedan Join Date: Sep 2011 Location: Vancouver BC Posts: 59 iTrader: (0)	M Performance Style Carbon Splitters on Ebay? Out of curiousity I searched on Ebay for OEM carbon splitters and found a replica of them from a China manufacturer also in carbon. Auction pics looked legit and the product appears high quality. I asked a friend in Asia what he thought of them and he said that once on the car, they look as good as factory. Since the splitters are mainly cosmetic (re: I don't go fast enough to notice a difference) I am not too concerned if its 100% carbon fiber and resin or a wrap of a fiberglass core and resin. At least, on the surface, the finish appears authentic. The price difference is certainly staggering. Anyone else tried these ones? Ebay link here: http://cgi.ebay.com/ws/eBayISAPI.dll...#ht_5245wt_905
	Tweet

11-02-2011, 04:50 AM	#5
Ken37.73 Private 1st Class Drives: E92 M3 Jet Black Join Date: Jan 2008 Location: Ireland Posts: 465 iTrader: (0)	+1 I've been hovering above Buy It Now since I saw your post. Thanks would really appreciate a pic ...... __________________

11-02-2011, 09:26 AM	#6
Sean05 Putcha ang ganda... Drives: 08 MR E92 M3 Join Date: Feb 2010 Location: Los Angeles, Brea CA. Posts: 4,978 iTrader: (9)	WOW more ebays stuff... seems like they are getting better.... i will be ordering an xpipe from ebay and now this... hmmmm very interesting... LOL __________________

11-03-2011, 11:13 AM	#8
geneatals Ninja Drives: 2011.5 E90 M3 Join Date: Dec 2007 Location: So Cal (SFV) Posts: 2,961 iTrader: (2)	it that the angle/a shadow, or does the passenger side splitter not contact the bumper on the inner/middle side? __________________ 2011.5 E90 M3 AW l Black Novillo Leather \| Carbon Fiber Leather Trim \| ZCP \| ZP2 \| M-DCT \| Navigation \| Moonroof \| 6FL l Pics/Mods Retired: 2008 535i l AW l Black Dakota Leather l Bamboo Anthracite l ZPP l ZSP l 6FL

11-03-2011, 09:38 PM	#14
Brucewonder Major Drives: 2011 E92 M3 yea boi Join Date: Nov 2007 Location: Socal Posts: 1,469 iTrader: (4)	you gotta admit...for $200 vs $650, its pretty damm good __________________ 2011.5 E92 ///M3 SSII/FR

11-01-2011, 03:30 PM	#2
eclipsisNA Precision Detailing Boutique Drives: 2013 Estoril 328i M Sport Join Date: Oct 2007 Location: Orange County, CA Posts: 2,891 iTrader: (6) Garage List 2011.5 BMW M3 [3.88]	My OEM splitters recently got cracked from going up a steep driveway, so I didn't want to spend another $700 on something that will likely get broken again. I went with the ones linked to below, and the quality is fantastic for the price. Fitment is 100%, which I was shocked to see. I was expecting some flaws in the fitment, but there are none to be found. Quality is about 95%, with some distortions in the weave on the underside, but you'll never see that part of the splitter so it doesn't matter. They're a tremendous value. I've been adamant in the past about not buying replicas, but on a part that is going to likely get scratched/cracked over time, I had to go with the replicas. Also, shipping was extremely fast from this vendor considering it's coming from China. Took 2 business days to get to SoCal. http://www.ebay.com/itm/150526759550

11-03-2011, 11:45 AM	#9
MusclezMarinara Banned Drives: VALNCYA Join Date: Jan 2009 Location: Jersey Posts: 5,026 iTrader: (23) Garage List 2011 BMW 1M [5.00] 2009 335i Sedan xdrive [4.67]	There pretty spot on but not 100% id say 92% If you want real OEMs PM me

11-03-2011, 11:58 AM	#10
shay2nak I <3 E90 M3 Drives: 325i/Lotus Exige S Join Date: Feb 2011 Location: Calipornia Posts: 284 iTrader: (0)	look how straight the weave is on the OEM part. that should be the giveaway. I don't understand why they have to copy EVERY FUCKING THING. MAKE YOUR OWN SHIT!

11-03-2011, 03:50 PM	#13
Vancouver_M3 Private Drives: 2011 M3 Sedan Join Date: Sep 2011 Location: Vancouver BC Posts: 59 iTrader: (0)	Thanks for the response to my thread. The pics are very helpful in judging quality especially when u have the factory one on one side. I think if you had both on I probably wouldn't have noticed. I suppose if I was to get it I would buy a betalink kit and mount like the factory one and it would fit closer. I can see where it doesn't quite line up but like you said its probably cause of the tape. Did the double sided tape come with the part? From a quality standpoint, the factory one has a lot more visual continuity with the lines of the car as the pattern runs front to back rather than some arbitrary angle. Does the right side one go the opposite direction so both sides at least look mirrored?

11-04-2011, 08:41 AM	#16
bigjae1976 Brigadier General Drives: 04 330Ci, 11 E90 M3 Individual Join Date: Mar 2006 Location: Milwaukee, WI Posts: 4,047 iTrader: (8)	I've been through about 5 sets of clubsport splitters on my E46...I usually like sticking ith OEM but this part would be the exception. __________________

08-17-2012, 06:13 PM	#20
ProfessionalPro Enlisted Member Drives: M3 Join Date: Aug 2012 Location: N. Cal Posts: 30 iTrader: (0)	Ebay? How about a group buy? I've seen a few of these on ebay as well but there's a group buy site ive been using for a couple months, they just listed the M3 splitters. http://massdrop.com/bmw-e9x-m3-carbon-fiber-splitter I've heard of fit issues like this before, was there one solution allot of you guys found works best?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search