Wheel Help!

Shaan · 09-28-2011, 06:05 PM

thinkin about picking up some wheels from a local, just want to make sure that they're going to fit flush/okay on my e92.

wheels are 19x9.5 et20 all the way around and he his including 20m spacers.

should i run the wheels with spacers? and I'm planning on getting H&R springs in the near future, will the tires rub? i will be using the stock tires that came with the car.

thanks in advance!

elh0102 · 09-28-2011, 07:17 PM

If the wheels are 20 offset, that will probably work, although it is relatively aggressive (toward the outside). My track wheels are 10.0 inches, ET 25, and work fine. With a 9.5 width, you will end up about the same place, and I don't think you will have any fitment issues. But if you are considering using a 20mm spacer with an ET 20 wheel, offset thus 0, that will not work.

Shaan · 09-29-2011, 10:43 AM

the local I'm picking the wheels up from says he running the wheels with 20mm spacers on his e46 m3 with no modification.. maybe he's mistaken?

Chowster · 09-29-2011, 10:49 AM

Quote:

Originally Posted by Shaan

the local I'm picking the wheels up from says he running the wheels with 20mm spacers on his e46 m3 with no modification.. maybe he's mistaken?

There's your issue. E46 and E92 offsets are different.

Z K · 09-29-2011, 12:10 PM

19x9.5 +20 and a 20mm spacer?! That would make the wheel fitment 19x9.5 +0. There is no way that would fit on an E46 unless he has some kind of crazy wide body conversion on his car.

Something is wrong with this info.

Shaan · 10-03-2011, 12:42 PM

Quote:

Originally Posted by Z K

19x9.5 +20 and a 20mm spacer?! That would make the wheel fitment 19x9.5 +0. There is no way that would fit on an E46 unless he has some kind of crazy wide body conversion on his car.

Something is wrong with this info.

saw it with my own eyes. he was running them with a 245 tire in the rear. maybe thats why?

Anyways, picked up the wheels today, was wondering if i could swap my toms onto these aftermarket wheels?

09-28-2011, 06:05 PM	#1
Shaan Private Drives: M3 Join Date: Jun 2011 Location: Houston Posts: 94 iTrader: (2)	Wheel Help! thinkin about picking up some wheels from a local, just want to make sure that they're going to fit flush/okay on my e92. wheels are 19x9.5 et20 all the way around and he his including 20m spacers. should i run the wheels with spacers? and I'm planning on getting H&R springs in the near future, will the tires rub? i will be using the stock tires that came with the car. thanks in advance!
	Tweet

09-28-2011, 07:17 PM	#2
elh0102 Captain Drives: E92 M3 Join Date: Apr 2010 Location: USA Posts: 704 iTrader: (0)	If the wheels are 20 offset, that will probably work, although it is relatively aggressive (toward the outside). My track wheels are 10.0 inches, ET 25, and work fine. With a 9.5 width, you will end up about the same place, and I don't think you will have any fitment issues. But if you are considering using a 20mm spacer with an ET 20 wheel, offset thus 0, that will not work. __________________ 2011 Space Gray Coupe, DCT, ZCP, StopTech ST-60/ST-40 BBK.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

09-29-2011, 10:43 AM	#3
Shaan Private Drives: M3 Join Date: Jun 2011 Location: Houston Posts: 94 iTrader: (2)	the local I'm picking the wheels up from says he running the wheels with 20mm spacers on his e46 m3 with no modification.. maybe he's mistaken?

09-29-2011, 12:10 PM	#5
Z K Major Drives: E90 M3 Join Date: Jul 2011 Location: San Francisco Posts: 1,240 iTrader: (2) Garage List 2008 BMW E90 M3 [0.00]	19x9.5 +20 and a 20mm spacer?! That would make the wheel fitment 19x9.5 +0. There is no way that would fit on an E46 unless he has some kind of crazy wide body conversion on his car. Something is wrong with this info.