12-28-2013, 03:33 PM
|
#3
|
BimmerPost Supporting Vendor
Drives: Harrop M3 / F10 M5 / F82 M4
Join Date: Apr 2008
Location: SoCal
|
Quote:
Originally Posted by regular guy
Quote:
Originally Posted by 8k3
BMW spec (per ALLDATA) says to tighten to 2nm then 6nm, then to 130deg, loosen and repeat (2,6,130deg) 3 times
The sheet given by VAC says 45ft/lbs
Which is correct? Or rather what is the correct torque spec and procedure?
Thanks
|
Both are correct. The different rod bolts have different torque specs. BMW rod bolts use torque angle (2nm + 130 degrees). ARP rod bolts use 45 ft/lbs.
Edit: Carrillo M9-CARR rod bolts use 50 ft/lbs.
|
good to know!
|
|
|