View Single Post
      11-19-2009, 03:22 PM   #31
V8M3Driver
New Member
United_States
0
Rep
8
Posts

Drives: 2010 BMW M3
Join Date: Nov 2009
Location: AZ/Germany

iTrader: (0)

Quote:
Originally Posted by 330CIZHP View Post
I would not put too much stock in just one source especially if it is Dinan. There are much better companies out there. Being a tuner, I am sure you know looking at real world examples is the best way.

For example, this fellow on this board gained 50 wheel HP from the mods he has listed before even the full tune (70 wheel HP with full tune, which makes it around 500 HP crank HP), which are only 4 or so (his baseline is very low compared to stock M3s, but he dyno'ed on a Mustang dyno, which is famous for reading very low and all his dynos were at the same place within a day of each other so all that matters is that it is an apples to apples comparison). You might want to read through the entire thread and might find it informative.

http://www.m3post.com/forums/showthread.php?t=322545
I appreciate your input. I will read through the thread as it seems full of good info.

Thanks...
Appreciate 0