Doing anything by hand is just silly in this case. I would save your time and effort of taking off multiple layers with an orange only to realize you could have used one pass with a yellow pad and Menzerna power polish and will completely eliminate that puppy. Then a quick pass with orange and the power. Then the white pad with any stage 1/light cutting/finishing polish. 3 steps with guarenteed results and completely safe to your paint.
Using an orbital buffer is nearly impossible to damage your paint unless you stick a wool pad or yellow pad on full speed and literally leave it in one spot for 5 minutes. Its nothing like a rotary which can burn through paint in seconds if left in one spot. Orbitals like the Pc are no brainers and hard to screw up in anyway.
Good luck!
|