Quote:
Originally Posted by yahtzee
I know I may regret admitting this but I was actually trying to disassemble the lighter itself to remove it vs. simply unplugging that white plug. What a dumbass. Anyway, what type of rewiring did you have to do to get this to work...There were actually two LED lights left from the old piece.....did you just want to use one?
|
I used the one that previously illuminated the ash tray. So, I kept the ground (brown) wire and power wire for the LED. The ground needed to be spliced because it attached to the lighter. I cut and taped off the remaining unused wires and inch or so from the connector. I may decide to add a 12V power outlet somewhere in the console. Very simple and effective.